Journal of Magnetics

  • 제16권3호
  • /
  • Pages.225-228
  • /
  • 2011
  • /
  • 1226-1750(pISSN)
  • /
  • 2233-6656(eISSN)
한국자기학회 (The Korean Magnetics Society)
권호 표지
DOI QR코드

DOI QR Code

Effect of Isothermal Aging on the Magnetic Properties of 1Cr-0.5Mo Steel

  • Kim, Min-Gi (Div. of Industrial Metrology, Korea Research Institute of Standards and Science) ;
  • Ryu, K.S. (Div. of Industrial Metrology, Korea Research Institute of Standards and Science) ;
  • Lee, Y.H. (Div. of Industrial Metrology, Korea Research Institute of Standards and Science) ;
  • Park, J.S. (Div. of Industrial Metrology, Korea Research Institute of Standards and Science) ;
  • Kim, C.G. (Dept. of Materials Engineering, Chungnam National University)
  • 투고 : 2011.06.14
  • 심사 : 2011.09.14
  • 발행 : 2011.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Magnetic properties and Rockwell hardness of 1Cr-0.5Mo steel have been investigated as a function of isothermal aging time. Our results showed that coercivity, hysteresis loss and Rockwell hardness in the aged samples decreased as aging time increased. This phenomenon was analyzed using optical microscopy and scanning electron microscopy. A significant diffusion of Cr and Mo atoms formed $M_2C$ and $M_7C$ carbides, lowering the matrix strength. $M_2C$ and $M_7C$ carbides partially segregated inside grains, diffused into grain boundaries, and finally resulted in a soft ferrite matrix and a hard grain boundary. The magnetic and mechanical softening of the matrix is likely to govern the properties of the sample more than the hardening of the grain boundary by carbide precipitations.

키워드

참고문헌

  1. R. Viswanathan and S. Gehl, Journal of Engineering Materials and Technology 113, 263 (1991). https://doi.org/10.1115/1.2903401
  2. K. S. Ryu, S. H. Nahm, Y. I. Kim, and K. M. Yu, Journal of Materials Science Letters 19, 1759 (2000). https://doi.org/10.1023/A:1006787120582
  3. R. M. Bozorth, Ferromagnetism, Van Northtrand, New York (1951) pp. 14-15.
  4. K. S. Ryu, S. H. Nahm, Y. B. Kim, K. M. Yu, and D. Son, J. Magn. Magn. Mater. 222, 128 (2000). https://doi.org/10.1016/S0304-8853(00)00532-1
  5. D. C. Jile, J. Phys. D 21, 1186 (1988). https://doi.org/10.1088/0022-3727/21/7/022
  6. H. Kwun and G. L. Burkhardt, J. Appl. Phys. 61, 1576 (1987). https://doi.org/10.1063/1.338093
  7. V. A. Biss and T. Wada, Metallurgical Transactions A 16, 109 (1985). https://doi.org/10.1007/BF02656718
  8. ASTM A 773/A 773M-96, ASTM (1996).
  9. B. D. Cullity, Introduction to Magnetic Materials. Addison-Wesley, Reading, MA (1972) p 317.