참고문헌
- 김경주(2006) 슬림빔을 이용한 슬림플로어공법 소개, 대한건축학회지, 대한건축학회, 제50권, 제12호.
- 대한건축학회(2009) 건축구조기준 및 해설(KBC) 2009, 대한건축학회.
- 배규웅, 허병욱, 류기정, 박원, 이원열(2010) 단면 형상이 T+U 형태인 롤 성형 강판합성보 공법개발, 한국강구조학회지, 한국강구조학회, 제22권, 제3호, pp.20-26
- 송영, 최경륜(2008) 주거용 무량복합구조(FcDW)시스템 설계 와 적용, 콘크리트학회지, 한국콘크리트학회, 제20권, 제2호, pp.37-42
- 이현호, 김도현, 김영식, 우성우(2008) 무량판 구조의 횡하중저항시스템 및 설계 절차, 콘크리트학회지, 한국콘크리트학회, 제20권, 제2호, pp.14-18.
- 이호엽, 김석중, 김필중, 최산호, 양영성, 김규석(1992) 장방형 개구부를 갖는 보강유공합성보에 관한 연구, 대한건축학회 학술발표논문집, 대한건축학회, 제12권, 제2호, pp.417-420.
- 이호찬(2008) MHS공법 소개, 한국건축구조기술사회지, 한국건축구조기술사회,제15권, 제1호, pp.55-65.
- 정광량, 손영진(2006) 무량판 바닥 시스템에 대한 구조계획 및 시공기술, 대한건축학회지, 대한건축학회, 제50권, 제3호, pp.106-111
- 최산호, 김규석, 양영성, 김필중(1993) 다공 합성보의 변형 및 내력에 관한 연구, 대한건축학회논문집, 대한건축학회, 제9권, 제11호, pp.99-108.
- 최재우, 김상모, 김영호, 김상섭, 이창남, 김규석(2001) TSC 합성보의 거동 분석,대한건축학회 학술발표논문집, 대한건축학회, 제21권, 제2호, pp.305-308.
- 황황규, 백성렬(2009) 비대칭 조립 H형강 합성보, SMARTBEAM 개발 및 적용사례 소개, 한국건축구조기술사회지, 한국건축구조기술사회, 제16권, 제4호, pp.48-52
- American Concrete Institute (2008) Building Code Requirements for Structural Concrete and Commentary(ACI318M-08), ACI, U.S.A.
- American Institute of Steel Construction (2005) Steel Construction manual(Specifications and Codes), AISC, U.S.A.
- Camata, G. and Shing, P.B. (2010) Static and fatigue load performance of a gfrp honeycomb bridge deck, Composites Part B: Engineering, Elsevier, Vol.41, Issue 4, pp.299-307 https://doi.org/10.1016/j.compositesb.2010.02.005
- Chen, Y., Davalos, J.F., and Ray, I. (2006) Durability prediction for GFRP bars using short-term data of accelerated aging tests, J. Compos. Constr., American Society of Civil Engineers, Vol. 10, Issue. 4, pp.279-286. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:4(279)
- Chen, Y., Davalos, J.F., Ray, I., and Kim, H.Y. (2007) Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures, Compos. Struct., Elsevier, Vol. 78, Issue. 1, pp.101-111. https://doi.org/10.1016/j.compstruct.2005.08.015
- Ju,Y.K., Chun,S.C., and Kim,S.D. (2009) Flexural Test of a Composite Beam Using Asymmetric Steel Section with Web Openings, Journal of Structural Engineering, American Society of Civil Engineers, Vol. 135,No. 4,pp.448-458. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(448)
- Loo, Y.C. and Guan, H. (1997) Cracking and Punching Shear Failure Analysis of RC Flat Plates, Journal of Structural Engineering, American Society of Civil Engineers, Vol. 123, No. 10, pp.1321-1330. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1321)
- Makowski Z.S. (1964) The structural applications of plastics. In: Davis RM, editor. Plasticsin Building Construction. Proc Conference on Plastics in Building Construction, London, Battersea College of Technology, pp.49-78.
- Mullett, D.L. (1992) Slim floor design and construction, Steel Construction Institute, U.K.
- Mullett, D.L. (1998) Composite floor system, Blackwell, Oxford, U.K.
- Mullett, D.L. and Lawson, R.M. (1993) Slim floor construction using deep decking, Steel Construction Institute, U.K.
- Naccarato, P.A. (1999) New Alternative to Flat Plate Construction, Modern Steel Construction, AISC, U.S.A.
- Naccarato, P.A. (2000) Low Floor-to-Floor Heights, Modern Steel Construction, AISC, U.S.A.
- Rackham, J.W., Hicks, S.J., and Newman, G.M. (2006) Design of Asymmetric Slimflor Beams with Precast Concrete Slabs, Steel Construction Institute, U.K.
- Robert, M. and Benmokrane, B. (2010) Physical, Mechanical, and Durability Characterization of Preloaded GFRP Reinforcing Bars, J. Compos. Constr., American Society of Civil Engineers, Vol. 14, Issue 4, pp.368-375 https://doi.org/10.1061/(ASCE)CC.1943-5614.0000104
- Robert, M., Cousin, P.,and Benmokrane,B. (2009) Durability of GFRP reinforcing bars embedded in moist concrete, J. Compos. Constr., American Society of Civil Engineers, Vol.13, No.2, p.132, pp.66-73.