An Experimental Study on the Estimate of Wind Force Coefficient of Transmission Tower Rectangular Frame

철탑 사각골조의 풍력 계수 산정에 관한 실험적 연구

  • 신구용 (한전전력연구원.송배전연구소) ;
  • 임재섭 (한전전력연구원.송배전연구소) ;
  • 황규석 (현대건설 기술/품질 개발원) ;
  • 길용식 (현대건설 기술/품질 개발원)
  • Received : 2010.07.30
  • Accepted : 2011.01.27
  • Published : 2011.02.28

Abstract

The wind force coefficient of a transmission tower frame shows several characteristics when the section shape, solidity ratio, and wind direction angle are changed. In this study, the wind force characteristics of a transmission tower frame with a basic structure were evaluated using different solidity ratios and wind direction angles in a wind tunnel test. According to the solidity ratio, the size of the structure and the rectangular-frame model of the transmission tower were changed by adding a two-dimensional (2D) or three-dimensional (3D) structure. The transmission tower's rectangular frame was tested by changing the wind direction angle of the 2D-type structure from 0 to $90^{\circ}$ and by changing the wind direction angle of the 3D-type structure from 0 to $45^{\circ}$ Based on the results that were obtained, it can be concluded that the wind force coefficient of a transmission tower frame can be used as preliminary data in deciding the transmission tower's wind load.

골조로 구성된 철탑의 풍력계수는 구성부재의 단면형상, 충실율 등에 의해 변하며 풍향각에 의해서도 여러 가지 특성이 나타난다. 본 연구에서는 이러한 철탑골조에 대하여 충실율과 풍향각을 변화시키면서 풍동실험을 수행하여 철탑골조에 작용하는 풍력특성을 평가한다. 실험은 먼저 철탑을 구성하고 있는 부재의 특성을 파악하기 위한 기본형상 부재에 대한 실험을 수행하였다. 그리고 철탑 사각골조는 2D와 3D 형태로 기본형에 철탑부재를 추가하는 방법과, 부재크기를 증가시키는 방법으로 충실율을 변화시킨 모형을 제작하였으며, 2D 형상은 풍향각을 0도에서 90도까지, 3D 형상은 풍향각을 0도에서 45도까지 변화시키면서 풍동실험을 수행하였다. 본 연구의 결과인 철탑 사각골조의 풍력계수 특성은 향후 철탑 풍하중 설계의 기초자료로 사용될 것이다.

Keywords

References

  1. 대한건축학회(2009) 국토해양부 고시 건축구조기준 및 해설.
  2. 민경원, 문병욱(2006) 송전철탑의 동특성 및 풍응답 저감, 대한건축학회논문집, 대한건축학회, 제22권, 제6호, pp.21-29.
  3. 조강표, 타무라 유키오, 이토 타카요시(2003) 풍동실험을 통한 경량통신철탑의 풍응답 예측, 2003년 춘계학술발표대회 논문집, 대한건축학회, 제23권, 제1호, pp.35-38.
  4. 한국전력공사(2008) 설계기준-1111가공송전용 철탑설계기준.
  5. 한국풍공학회(1998) 실무자를 위한 건축물 풍동실험 가이드북.
  6. 電氣學會. 送電用支持物設計標準 JEC_127-1979(1996) 電氣書院.
  7. 大熊武司, 神田順, 田村辛雄:建築物耐風設計, 鹿島出版會, 1996
  8. Pagon, W.W. (1958) Wind forces on structures-plate girders and trusses, Proc. ASCE, ST4, 1958.