Abstract
According to the improvement of computer's performance, the development of Geographic Information System (GIS), and the activation of offering information, a distributed model for analyzing runoff has been studied a lot in recently years. The distribution model is a theoretical and physical model computing runoff as making target basin subdivided parted. In the distributed model developed by this study, the volume of runoff at the surface flow is calculated on the basis of the parameter determined by landcover data and a two-dimensional diffusion wave equation. Most of existing runoff models compute velocity and discharge of flow by applying Manning-Strickler's mean velocity equation and Manning's roughness coefficient. Manning's roughness coefficient is not matched with dimension and ambiguous at computation; Nevertheless, it is widely used in because of its convenience for use. In order to improve those problems, this study developed the runoff model by applying not only Manning-Strickler's equation but also Chezy's mean velocity equation. Furthermore, this study introduced a power law of exponential friction factor expressed by the function of roughness height. The distributed model developed in this study is applied to 6 events of fan-shape basin, oblong shape test basin and Anseongcheon basin as real field conditions. As a result the model is found to be excellent in comparison with the exiting runoff models using for practical engineering application.
분포형 유출모형에 대하여는 컴퓨터의 발달과 지리정보시스템의 구축 및 관련정보의 제공이 활성화되면서 최근 많은 연구가 진행되고 있다. 이러한 분포형 유출모형은 대상유역을 보다 세분 요소화하여 계산하는 이론적이고 물리적인 기반의 모형이다. 본 연구에서는 토지피복 상태에 따라 결정되는 매개변수와 2차원 확산파 방정식에 기초하여 지표면에서의 유출량을 계산하는 모형을 개발하였다. 기존에 연구되었거나 개발 중인 유출모형은 대부분 Manning-Strickler의 평균 유속공식과 Manning 조도계수를 이용하여 유속과 유량을 산정하고 있다. Manning 조도계수는 사용상의 편의성 때문에 보편적으로 사용하고 있으나, 차원이 일치하지 않고 추정 시 모호한 문제점이 있다. 이러한 문제를 개선하기 위해 본 연구에서는 Manning-Strickler식뿐만 아니라 차원이 일치하는 Chezy의 평균유속공식을 적용하여 유출모형을 개발하였다. 또한, Chezy의 마찰계수를 적용하기 위하여 조고의 함수로 표현되는 지수형 마찰계수 산정식을 도입하였다. 따라서 모호한 조도계수의 개념을이용하지 않고 거친 정도를수치화하여 물리적인 의미를 가진마찰계수를 산정하고 적용 가능성을 검토하였다. 본 연구에서는 개발된 모형을 부채꼴 실험유역과 장방형 실험유역 및 실제유역인 안성천유역을 대상으로 6개의 사상을 적용하여 그 적용성을 확인하였다.