DOI QR코드

DOI QR Code

Analysis of the Uncertainty of Compressive Forces Acting on the Patella by Using Multi-Body Modeling and Muscle Mechanics

다물체 모델링과 근의 특성을 이용한 무릎뼈에 가해지는 압력의 불확실성 추정 연구

  • 남궁홍 (한양대학교 기계공학과) ;
  • 유홍희 (한양대학교 기계공학과)
  • Received : 2011.01.17
  • Accepted : 2011.04.20
  • Published : 2011.07.01

Abstract

The goal of this study is to estimate the force acting on the knee joint in the human body by using the Hilltype muscle model based on a musculoskeletal model of the human lower extremity in the sagittal plane. For estimating the force applied, the human leg is modeled using multi-body modeling. This leg model comprises biarticular muscles acting on two joints of the upper and lower limbs, and the muscles include some of the major muscles such as the hamstring. In order to analyze the uncertainty of the applied forces acting on the knee joint, statistical distributions of human body, leg part, parameters are required and to obtain the parameter's statistical characteristic of the part sample survey method is employed. Finally, by using the sensitivity information of the parameters, the force acting on the knee joint can be estimated.

본 연구에서는 인체의 하지부를 다물체 시스템으로 모델링하여 무릎관절에 걸리는 구속력의 불확실성을 추정하였다. 일반적으로 근육의 기계적인 특성은 Hill-type muscle model 이 사용되며 여기에 적용되는 인체의 특성과 해부학적인 데이터는 지난 십 수년 동안 크게 발전되었다. 그러나 정확하게 그것들을 안다는 것은 불가능하며 개인마다 다른점을 고려해야 할 필요가 있다. 본 논문에서는 Hill-type muscle model 과 함께 인체의 해부학적인 데이터를 통계 방법론을 이용하여 무릎 관절에 걸리는 구속력의 불확실성을 추정하였다. 초기 앉아있는 자세에서 일어서는 과정에서 작용하는 구속력을 추정하였으며 이때 인체 하지 근육의 특성을 musculoskeleton-actuator 를 이용하여 해석하였다.

Keywords

References

  1. Zajac, F. E., 1989, "Muscle and Tendon Properties Models Scaling and Application to Biomechanics and Motor," Critical Reviews in Biomedical Engineering, Vol. 17, No. 4, pp. 359-411
  2. Kuo, A. D. and Zajac, F. E., 1993, "A Biomechanical Analysis of Muscle Strength as a Limiting Factor in Standing Posture," Journal of Biomechanics, Vol. 26, Suppl. 1, pp. 137-150. https://doi.org/10.1016/0021-9290(93)90085-S
  3. Delp, S.L., 1990, "A Computer-Graphics System to Analyze and Design Musculoskeletal Reconstructions of the Lower Limb," Stanford University, Ph. D. Thesis.
  4. Buchanan, T. S., Lylod, D. G., Manal, K., Besier, T. F., 2004, "Neuromusculoskeletal Modeling: Estimation of Muscle Forces and Joint Moments and Movements from Measurements of Neural Command," Journal of Applied Biomechanics, Vol. 20, pp. 367-395. https://doi.org/10.1123/jab.20.4.367
  5. Menegaldo, L. L., Fleury , A. de T., and H. I. Weber, 2003, "Biomechanical Modeling and Optimal Control of Human Posture," Journal of Biomechanics, Vol. 36, No. 11, pp. 1701-1712. https://doi.org/10.1016/S0021-9290(03)00170-2
  6. Menegaldo, L. L., Fleury , A. de T., and H. I. Weber, 2004, "Moment Arms and Musculotendon Lengths Estimation for a Three-Dimensional Lower Limb Model," Journal of Biomechanics, Vol. 37, No. 9, pp. 1447-1453. https://doi.org/10.1016/j.jbiomech.2003.12.017
  7. Nam, Y. S., 2009, "Estimation of Muscle-Tendon Model Parameters Based on a Numeric Optimization," Journal of the Korean Society for Precision Engineering Vol. 26, No. 6, pp. 122-130.
  8. Vaughan, C. L., Davis, B. L., O'Connor, J. C., 1992, "Dynamics of Human Gait, 2nd Edition," Kiboho Publishers, South Africa.
  9. Choi, D. H., 2005, "Statistical Tolerance Analysis and Modal Analysis of Multibody Systems," Hanyang University, Ph. D. Thesis.