초록
본 논문에서는 Network RTK 보정정보 생성 프로세스에서 핵심 process인 기준국간 미지정수 결정을 위해 Hatch filter를 이용한 방법과 L1/L2 측정치 조합을 활용하는 방법에 대해 소개하고 시뮬레이션 데이터 및 실측 데이터를 활용하여 그 성능을 비교 및 검증하였다. 각각의 방법에 대해 수식 전개를 수행하였으며, 사용자 성능 검증을 위해서 다중 기준국 네트워크에 대해 생성한 보정정보와 사용자 위치에서 생성한 보정정보의 차이값을 비교하였다. 각각의 기준국간 미지정수 결정 방법을 실측 데이터에 적용하여 사용자 성능을 예측한 결과, Hatch filter를 사용한 경우에는 단일 기준국 RTK 기반의 방법에 비해 다중 기준국 네트워크에서 생성된 보정정보를 사용하는 것이 사용자 성능을 크게 향상시키는 결과를 확인하였다. 그러나 사용자의 미지정수에 영향은 없으나, 상당한 크기의 바이어스 오차가 포함되는 것을 확인하였고 그 원인에 대해 분석하였다. L1/L2 측정치 조합을 이용한 경우, Hatch filter를 사용한 방법에 비해 사용자에 발생하는 오차의 크기가 훨씬 감소하였으며 잔차의 경향성도 훨씬 감소한 것을 확인하였다.
In this paper, we introduce two techniques for resolving integer ambiguities between reference stations, which is one of the most important processes in Network RTK correction generation process. Each techniques uses Hatch filter and combination of L1/L2 measurements and we used simulation data and real data to evaluate performance of the techniques. For evaluating performance of each technique, we compared corrections generated from user site and Network RTK. As a result, Network RTK with the technique which uses Hatch filter improves user performance much more than single baseline RTK does. Residual of user is smaller than a half size of wavelength so it does not affect user integer ambiguity resolution, however, it contains significant bias error. On the other hand, when we used the technique which uses combination of L1/L2 measurements, residual error of user is largely reduced compared to the technique using Hatch filter.