DOI QR코드

DOI QR Code

A 54-GHz Injection-Locked Frequency Divider Based on 0.13-㎛ RFCMOS Technology

0.13-㎛ RFCMOS 공정 기반 54-GHz 주입 동기 주파수 분주기

  • Seo, Hyo-Gi (School of Electrical Engineering, Korea University) ;
  • Yun, Jong-Won (School of Electrical Engineering, Korea University) ;
  • Rieh, Jae-Sung (School of Electrical Engineering, Korea University)
  • 서효기 (고려대학교 전기전자전파공학부) ;
  • 윤종원 (고려대학교 전기전자전파공학부) ;
  • 이재성 (고려대학교 전기전자전파공학부)
  • Accepted : 2011.03.16
  • Published : 2011.05.31

Abstract

In this work, a 54 GHz divide-by-3 injection-locked frequency divider(ILFD) based on ring oscillator has been developed in a 0.13-${\mu}M$ Si RFCMOS technology for phase-locked loop(PLL) application. The free-running frequency is 18.92~19.31 GHz with tuning range of 0~1.8 V, consuming 70 mW with a 1.8 V supply voltage. At 0 dBm input power, the locking range is 1.02 GHz(54.82~55.84 GHz) and, with varactor tuning of 0~1.8 V, the total operating range is 2.4 GHz(54.82~57.17 GHz). The fabricated circuit size is 0.42 mm${\times}$0.6 mm including probing pads and 0.099 mm${\times}$0.056 mm for core area.

본 논문에서는 54 GHz 대역의 위상 고정 루프에서 사용되기 위한 Ring 발진기를 이용한 3 분주 주입 동기 주파수 분주기(Injection-Locked Frequency Divider: ILFD)를 0.13-${\mu}M$ Si RFCMOS 공정을 이용하여 설계, 제작한 결과를 보인다. 1.8 V의 공급 전압에 대해서 buffer단을 포함하여 70 mW의 전력을 소비하며, 입력 신호가 없을 때 0~1.8 V의 varactor 조정 전압 범위에 대하여 18.92~19.31 GHz에서 자유 발진(free-running oscillation)을 하였다. 0 dBm의 입력 전력에 대해서 1.02 GHz(54.82~55.84 GHz)의 동기 범위(locking range)를 가지며 varactor 조정(0~1.8 V)을 포함한 동작 범위(operating range)는 약 2.4 GHz(54.82~57.17 GHz)를 보였다. 제작된 회로의 크기는 측정 pad를 포함하여 0.42 mm${\times}$0.6 mm이며, pad를 제외한 실제 동작 영역의 크기는 0.099 mm${\times}$0.056 mm이다.

Keywords

References

  1. J. -S. Rieh, S. Y. Kim, "Technology and design considerations for millimeter-wave circuits", in 9th International Conference on Solid-State and Integrated-Circuit Technology, pp. 1352-1356, 2008.
  2. S. Jang, C. Lee, "A wide locking range LC-tank injection locked frequency divider", IEEE Microwave and Wireless Components Letters, vol. 17, no. 8, pp.613-615, Aug. 2007. https://doi.org/10.1109/LMWC.2007.901796
  3. B. Razavi, "A millimeter-wave CMOS heterodyne receiver with on-chip LO and divider", IEEE Journal of Solid-State Circuits, vol. 43, no. 2, Feb. 2008. https://doi.org/10.1109/JSSC.2007.914300
  4. J. Lee, B. Razavi, "A 40-GHz frequency divider in 0.18-${\mu}m$ CMOS technology", in Digest of Technical Papers in VLSI Circuits, Jun. 2003.
  5. J. Lee, "A 75-GHz PLL in 90-nm CMOS technology", in Digest of Technical Papers in IEEE International Solid-State Circuits Conference, pp. 432-613, Feb. 2007. https://doi.org/10.1109/ISSCC.2007.373479
  6. C. Changhua, D. Yanping, and K. K. O, "A 50-GHz phase-locked loop in 0.13-${\mu}m$ CMOS", IEEE Journal of Solid-State Circuits, vol. 42, pp. 1649-1656, Aug. 2007. https://doi.org/10.1109/JSSC.2007.900289
  7. M. Motoyoshi, M. Fujishima, "43 ${\mu}W$ 6 GHz CMOS divide-by-3 frequency divider based on threephase harmonic injection locking", in IEEE Asian Solid-State Circuits Conference, pp. 183-186, 2006. https://doi.org/10.1109/ASSCC.2006.357881
  8. R. J. Betancourt-Zamora, S. Verma, and T. H. Lee, "1-GHz and 2.8-GHz CMOS injection-locked ring oscillator prescalers", in Digest of Technical Papers in VLSI Symposium, Jun. 2001.
  9. 서승우, 서효기, 이재성, "링 발진기를 이용한 18 GHz 4분주 주입 동기 주파수 분주기", 한국전자파학회논문지, 21(5), pp. 453-457, May 2010. https://doi.org/10.5515/KJKIEES.2010.21.5.453
  10. S. W. Seo, H. G. Seo, S. G. Jeon, and J.-S. Rieh, "A 20-30 GHz divide-by-3 ring-oscillator-based injection locked frequency divider with a wide locking range", Microwave and Optical Technology Letters, vol. 53, no. 4, pp. 839-841, Apr. 2011. https://doi.org/10.1002/mop.25883
  11. S. Sim, D. -W. Kim, and S. Hong, "A CMOS direct injection-locked frequency divider with high division ratios", IEEE Microwave and Wireless Components Letters, vol. 19, pp. 314-316, May 2009. https://doi.org/10.1109/LMWC.2009.2017603
  12. R. Adler, "A study of locking phenomena in oscillators", Proceedings of the Institute of Radio Engineers, vol. 34, no. 6, pp. 351-357, 1946.