Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Multi-level Shape Optimization of Lower Arm by using TOPSIS and Computational Orthogonal Array

TOPSIS와 전산직교배열을 적용한 자동차 로워암의 다수준 형상최적설계

  • Received : 2010.10.28
  • Accepted : 2011.01.27
  • Published : 2011.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In practical design process, designer needs to find an optimal solution by using full factorial discrete combination, rather than by using optimization algorithm considering continuous design variables. So, ANOVA(Analysis of Variance) based on an orthogonal array, i.e. Taguchi method, has been widely used in most parts of industry area. However, the Taguchi method is limited for the shape optimization by using CAE, because the multi-level and multi-objective optimization can't be carried out simultaneously. In this study, a combined method was proposed taking into account of multi-level computational orthogonal array and TOPSIS(Technique for Order preference by Similarity to Ideal Solution), which is known as a classical method of multiple attribute decision making and enables to solve various decision making or selection problems in an aspect of multi-objective optimization. The proposed method was applied to a case study of the multi-level shape optimization of lower arm used to automobile parts, and the design space was explored via an efficient application of the related CAE tools. The multi-level shape optimization was performed sequentially by applying both of the neural network model generated from seven-level four-factor computational orthogonal array and the TOPSIS. The weight and maximum stress of the lower arm, as the objective functions for the multi-level shape optimization, showed an improvement of 0.07% and 17.89%, respectively. In addition, the number of CAE carried out for the shape optimization was only 55 times in comparison to full factorial method necessary to 2,401 times.

Keywords

References

  1. Kim, J. K., Park, Y. C., Kim, Y. J. and Lee, K. H., "Structural Optimization of a Control Arm with Consideration of Durability Criteria," Transaction of KSME A, Vol. 33, No. 11, pp. 1225-1232, 2009.
  2. Park, N. S., Lee, D. H., Lee, K. Y. and Park, Y. C., "A study on Multi Objective Optimization application of the Lower Control ARM of the Vehicle Suspension," Donga Industrial Technology Research Center, Vol. 7, No. 2, pp. 39-49, 2002
  3. Song, B. C., Kang, D. H., Park, Y. C. and Lee, K. H., "Structure Optimization for a Lower Control Arm Using Finite Element Method," Proceedings of the Korean Society for Precision Engineering Autumn Conference, pp. 385-386, 2007.
  4. Phadke, M. S., "Quality Engineering Using Robust Design," Prentice Hall, 1989.
  5. Taguchi, G. and Konishi, S., "Taguchi Methods Orthogonal Arrays and Linear Graphs: Tools for Quality Engineering," Amer. Supplier Inst., 1987.
  6. Nair, V. N., "Taguchi's Parameter Design: a Panel Discussion," Technometrics, Vol. 34, No. 2, pp. 127-161, 1992. https://doi.org/10.1080/00401706.1992.10484904
  7. Owen, A., "Orthogonal Arrays for Computer Experiments, Integration, and Visualization," Statistica Sinica, Vol. 2, pp. 439-452, 1992.
  8. Kim, Y. H., Seo, J. H., Cho, Y. W. and Park, M. K., "A Case Study of MADM using Taguchi Techniques and LAM," Proc. of Korea Safety Management & Science Annual Fall Conferences, pp. 399-449, 2005.
  9. Li, D. F., "TOPSIS-based Nonlinear-Programming Methodology for Multiattribute Decision Making with Interval-Valued Intuitionistic Fuzzy Sets," IEEE Transactions on Fuzzy Systems, Vol. 18, No. 2, pp. 299-311, 2010.
  10. Mahdavi, I., Mahdavi-Amiri, N., Heidarzade, A. and Nourifar, R., "Designing a Model of Fuzzy TOPSIS in Multiple Criteria Decision Making," Applied Mathematics and Computation, Vol. 206, pp. 607-617, 2008. https://doi.org/10.1016/j.amc.2008.05.047
  11. ANSYS Inc., "ANSYS User's Guide ver. 11," 2009.
  12. Chakladar, N. D. and Charaborty, S., "A Combined TOPSIS-AHP-method-based approach for nontraditional machining process selection," Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 222, No. 12, pp. 1613-1623, 2008. https://doi.org/10.1243/09544054JEM1238
  13. Chen, S., Billings, S. A. and Grant, P. M., "Non-linear System Identification using Neural Networks," Int. J. Control, Vol. 51, No. 6, pp. 1191-1214, 1990. https://doi.org/10.1080/00207179008934126
  14. The Math Works Inc., "Neural Network Toolbox User's Guide," 1998.