Journal of Hydrogen and New Energy (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical Analysis on Performance Changes of the Tubular SOFCs according to Current Collecting Method

전류집전 방법에 따른 원통형 고체산화물 연료전지의 성능 변화 수치해석

  • Yu, Geon (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Park, Seok-Joo (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Lee, Jong-Won (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Lee, Seung-Bok (Department of Mechanical Engineering, Korea Univ.) ;
  • Lim, Tak-Hyoung (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Song, Rak-Hyun (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Shin, Dong-Ryul (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Kim, Ho-Young (Department of Mechanical Engineering, Korea Univ.)
  • Received : 2011.02.11
  • Accepted : 2011.04.22
  • Published : 2011.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Performance changes of an anode-supported tubular SOFC including current collectors are analyzed at different current collecting methods using numerical simulation. From the two dimensional numerical model of the solid oxide fuel cell with nickel felts as anodic current collectors and silver wires as cathodic ones, the performance curves and the distributions of temperature, concentration, current density are obtained. Also, the voltage loss of the cell is divided into three parts: activation loss, concentration loss and ohmic loss. The results show that the performance change of the cell is dominantly influenced by the ohmic loss. Although the temperature and concentration distributions are different, the total activation loss and concentration loss are nearly same. And the ohmic loss is divided into each parts of the cell components. The ohmic loss of the anodic current collectorreaches about 60~80% of the cell's total ohmic loss. Therefore, the reduction of the ohmic loss of the anodic current collector is very important for stack power enhancement. It is also recommended that the load should be connected to the both ends of the anodic current collector.

Keywords

References

  1. W. Vielstich, H. A. Gasteiger and A Lanm, "Handbook of Fuel Cells-Fundamentals, Technology and Applications", Vol. 1, John Wiley & Sons, Chichester, 2003.
  2. Ryan P. O'Hayre, Suk-won Cha, Whitney Colella, Fritz B. Prinz, "Fuel Cell Fundamentals", Willy & Sons, New York, 2006.
  3. H. Yakabe, T. Ogiwara, M. Hishinuma, I. Yasuda, "3-D model calculation for planar SOFC", Journal of Power Sources, 102, 2004, pp. 144-154.
  4. Daan Cui, Lin Liu, Yonglai Dong, Mojie Cheng, "Comparison of different current collecting modes of anode supported micro-tubular SOFC through mathematical modeling", Journal of Power Sources, 174 , 2007, pp. 246-254. https://doi.org/10.1016/j.jpowsour.2007.08.094
  5. Toshio Suzuki, Toshiaki Yamaguchi, Yoshinobu Fujishiro, Masanobu Awano, "Current collecting efficiency of micro tubular SOFCs", Journal of Power Sources, 163, 2007, pp. 737-742. https://doi.org/10.1016/j.jpowsour.2006.09.071
  6. Huayang Zhu, Robert J. Kee, "The influence of current collection on the performance of tubular anode-supported SOFC cells", Journal of Power Sources, 169, 2007, pp. 315-326. https://doi.org/10.1016/j.jpowsour.2007.03.047
  7. 이규호, 남기훈, 변재기, 최남현, 최영돈, "Wave 형상 채널을 통한 연료전지 Cathode에서의 물질전달 특성 향상에 관한 연구", 한국수소 및 신에너지학회 논문집, Vol. 22, No. 2, P. 71.
  8. B. Todd and J.B. Young, "Thermodynamic and transport properties of gases for use in solid oxide fuel cell modeling", Journal of Power Sources, 110, 2002, pp. 186-200. https://doi.org/10.1016/S0378-7753(02)00277-X
  9. Feng Zhao and Anil V. Virkar, "Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters", Journal of Power Sources, 141, 2005, pp. 79-95. https://doi.org/10.1016/j.jpowsour.2004.08.057
  10. Paola Costamagna and Kaspar Honegger, "Modeling of Solid Oxide Heat Exchanger Integrated Stacks and Simulation at High Fuel Utilization", J. Electrochem. Soc., 145, 1998, pp. 3995-4007. https://doi.org/10.1149/1.1838904
  11. S. Campanari and P. Iora, "Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry", Journal of Power Sources, 132, 2004, pp. 113-126. https://doi.org/10.1016/j.jpowsour.2004.01.043
  12. H.Y. Jung, W.-S. Kim, S.-H. Choi, H.-C. Kim, J. Kim, H.-W. Lee, J.-H. Lee, "Effect of cathode current-collecting layer on unit-cell performance of anode-supported solid oxide fuel cells", Journal of Power Sources, 155, 2006, pp. 145-151. https://doi.org/10.1016/j.jpowsour.2005.05.015