Acknowledgement
Grant : 송전철탑 특수기초 공법개발 및 설계기준 수립 연구
Supported by : 한국에너지 기술평가원(KETEP)
References
- 국제지반공학회 (2007), 국제지반공학회 ATC18(대형기초위원회) 말뚝의 연직인발재하시험기준, ATC18 S 3-2007.
- 김정부, 조성배 (1995), "765kV 철탑기초 설계 및 기초재하시험", 대한전기학회(1995), 1995년도 추계 학술대회 논문집, pp. 447-449.
- 일본동경전력 (1988), UHV 기초설계요항(안), 5.4-5.5.
- 장석한, 김희광, 이강현, 한경수, 함방욱, 정기선 (2007), "가공 송전 철탑기초 설계 및 시공방법연구", 전기학회논문지, 제 56권, 제 6호, pp.1031-1034.
- 한국지반공학회 (2009), 구조물기초설계기준, 한국지반공학회, pp.347-pp.368.
- 한국지반공학회 (2007) 한국지반공학회 기초기술위원회 말뚝의 연직인발재하시험기준, KGS TCF S 3-2007.
- 한국지반공학회 기초기술위원회 (2007), 기초의 재하시험 기준 및 해설, 구미서관, 서울, pp.III-16-17.
- 한국지반공학회 기초기술위원회 (2007), 일본지반공학회 기준 말 뚝의 연직재하시험 방법 및 해설, 구미서관, 서울, pp.206-209.
- BSI (1986), "British standard code of practice for foundations", BS8004, British Standard Institution (BSI), London.
- Chin, F.V. (1970), "Estimation of the Ultimate Load of Piles Not Carried to Failure", Proc. of 2nd southeast Asian Conference on Soil Engineering, pp.81-90.
- Davission, M. T. (1972), "High Capacity piles", Proceedings of Lecture Series on Innovations in Foundation Construction, American Society of Civil Engineers, ASCE, Illinois Section, Chicaco, March 22, pp.81-112.
- Debeer, E. E. (1967), "Proefondervindlijke bijdrage tot de studie van het grensdraag vermogen van zand onder funderingen op staal", Tijdshift der Openbar Verken van Belgie, No. 6.
- Decourt, L. (1999), "Behavior of foundations under working load conditions", Proceeding of the 11th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Foz-Dolguassue, Brazil, August, Vol.4, pp.453-488.
- Fellenius, B.H. (1980), "The analysis of results from routine pile load tests", Ground Engineering, Vol.13, No.6, pp.19-36.
- Fellenius, B.H. (2001), "What Capacity Value to Choose from the Results of a Static Loading Test", Fulcrum, Deep Foundation Institute, New Jersey.
- Fleming, W. G., Weltman A. J, Randolph, M. F., and Elson, W. K. (1992), "Piling Engineering", 2nd ed. John Wiley and Sons, Inc.
- FDOT (1999), "Standard specifications for rad and bridge construction", Florida Department of Transportation(FDOT), Tallahassee, Fla.
- G.E. Abdelrahman, E.M. Shaarawi and K.S.Abouzaid (2003), "INTERPRETATION OF AXIAL PILE LOAD TEST RESULTS FOR CONTINUOUS FLIGHT AUGER PILES", Proc. of the 9th Arab Structural Engineering Conf. pp.791-802.
- ISSMFE (1985), "Axial pile loading test-part 1: static loading", Geotechnical Testing Journal, ASTM, Vol.8, No.2, pp.79-89. https://doi.org/10.1520/GTJ10514J
- IEEE (2001), IEEE Strandard 691-2001 IEEE Guide for Transmission Structure Foundation Design and Testing. Overturning (Moment) tests.
- JEC (1979), "Design Standard for Power Transmission Supports", JEC-127-1979, Strandard of the Japanese Electro technical Committee.
- JGS (2002), "Standard for Vertical loading Test of Pile", JGS-1813-2002, Japanese Geotechnial Society.
- Meyerhof, G. G. Mathur, S. K., and Valsangkar, A. J. (1981) "Lateral resistance and deflection of rigid wall and piles in layered soils", Canadian Geotechnical Journal, Vol.18(2), pp.159-170. https://doi.org/10.1139/t81-021
- Reese, L.C., and O'Neill, M.W. (1988), "Drilled Shafts: construction procedures and design methods", FHWA-HI-88-042. Fedral Highway Administration, McLean, Va.
- SAA(1995), "Australian standards: piling-design and installation AS 2159. Standards Association of Australia (SAA), Homebush, NSW, Australia.
Cited by
- 송전용 철탑기초의 현장수평재하시험을 통한 연결형 말뚝기초의 거동 및 지지력특성 vol.28, pp.2, 2011, https://doi.org/10.7843/kgs.2012.28.2.57
- 수치해석을 이용한 송전철탑 연결형 기초의 연결보 강성에 따른 거동 특성 vol.33, pp.1, 2013, https://doi.org/10.12652/ksce.2013.33.1.219