IE interfaces (산업공학)

Korean Institute of Industrial Engineers (대한산업공학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of (K, r) Incomplete Inspection Policy for Minimizing Inspection Cost subject to a Target AOQ

출하 품질목표 조건하에 검사비용을 최소화하는(K, r) 부분검사정책의 분석

  • Yang, Moon-Hee (Department of Industrial Engineering, Dankook University)
  • 양문희 (단국대학교 공학대학 산업공학과)
  • Received : 2010.10.12
  • Accepted : 2010.12.02
  • Published : 2011.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we address an optimization problem for minimizing the inspection and rework cost in an inspection-rework system, which forms a network of nodes including a K-stage inspection system, storage areas for items, a source inspection shop, and a re-inspection shop. We assume that (n, 0) acceptance sampling is performed in the source inspection shop and that only 100(1-r)% of items of rejected lots are re-inspected in the re-inspection shop. Since all the nodes are interrelated, in order to formulate our steady-state objective function, we make a steady-state network flow analysis between nodes, and derive both the steady-state amount of flows between nodes and the steady-state fraction defectives by solving a nonlinear balance equation. Finally we provide some fundamental properties and an enumeration procedure for determining the optimal values of (K, r) which both minimizes our objective function and attains a given target average outgoing quality.

Keywords

References

  1. Avinadav, T. and Raz, T. (2003), Economic optimization in a fixed sequence of unreliable inspections, Journal of Operational Research Society, 54, 605-613. https://doi.org/10.1057/palgrave.jors.2601543
  2. Jaraiedi, M., Kochhar, D. V., and Jaisingh, S. C. (1987), Multiple Inspections to Meet Desired Outgoing Quality, Journal of Quality Technology, 19 (1), 46-51.
  3. Raz, T. and Thomas, M. U. (1982), A Method for Sequencing Inspection Activities Subject to Errors, IIE Transactions, 15(1), 12-18.
  4. Yang, M. (2007), A Design and Case Study of a K-Stage BLU Inspection System for Achieving a Target Defective Rate, International Journal of Management Science, 13(2), 141-157.
  5. Yang, M. (2010), Minimization of Inspection Cost in an Inspection System Considering the Effect of Lot Formation on AOQ, International Journal of Management Science, 16(1), 119-133.
  6. Yang, M. and Kim, S. (2009b), Minimization of Inspection Cost in an Inspection System Using a Time-based Flow Analysis, Journal of the Korean Institute of Industrial Engineers, 35(3), 194-202.
  7. Yang, M. and Kim, S. H. (2009a), Minimization of Inspection Cost in a BLU Inspection System Using a Steady-State Flow Analysis, International Journal of Management Science, 15(2), 53-68.