DOI QR코드

DOI QR Code

Modal strength reduction factors for seismic design of plane steel frames

  • Papagiannopoulos, George A. (Department of Civil Engineering, University of Patras) ;
  • Beskos, Dimitri E. (Department of Civil Engineering, University of Patras)
  • 투고 : 2010.09.15
  • 심사 : 2010.11.15
  • 발행 : 2011.03.25

초록

A new method for the seismic design of plane steel moment resisting frames is developed. This method determines the design base shear of a plane steel frame through modal synthesis and spectrum analysis utilizing different values of the strength reduction (behavior) factor for the modes considered instead of a single common value of that factor for all these modes as it is the case with current seismic codes. The values of these modal strength reduction factors are derived with the aid of a) design equations that provide equivalent linear modal damping ratios for steel moment resisting frames as functions of period, allowable interstorey drift and damage levels and b) the damping reduction factor that modifies elastic acceleration spectra for high levels of damping. Thus, a new performance-based design method is established. The direct dependence of the modal strength reduction factor on desired interstorey drift and damage levels permits the control of deformations without their determination and secures that deformations will not exceed these levels. By means of certain seismic design examples presented herein, it is demonstrated that the use of different values for the strength reduction factor per mode instead of a single common value for all modes, leads to more accurate results in a more rational way than the code-based ones.

키워드

참고문헌

  1. Borzi, B. and Elnashai, A.S. (2000), "Refined force reduction factors for seismic design", Eng. Struct., 22, 1244-1260. https://doi.org/10.1016/S0141-0296(99)00075-9
  2. Chai, Y.H., Fajfar, P. and Romstad, K.M. (1998), "Formulation of duration-dependent inelastic seismic design spectrum", J. Struct. Eng. - ASCE, 124(8), 913-921. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(913)
  3. Chakraborti, A. and Gupta, V.K. (2005), "Scaling of strength reduction factors for degrading elasto-plastic oscillators", Earthq. Eng. Struct. Dyn., 34, 189-206. https://doi.org/10.1002/eqe.416
  4. Cuesta, I., Aschheim, M.A. and Fajfar, P. (2003), "Simplified R-factor relationships for strong ground motions", Earthq. Spectra, 19(1), 25-45. https://doi.org/10.1193/1.1540997
  5. EC3 (1992), Eurocode 3, Design of steel structures, Part 1.1: General rules for buildings, European Prestandard ENV 1993-1-1/1992, European Committee for Standardization (CEN), Brussels.
  6. EC8 (2004), Eurocode 8, Design of structures for earthquake resistance, Part 1: General rules, seismic actions and rules for buildings, European Standard EN 1998-1, Stage 51 Draft, European Committee for Standardization (CEN), Brussels.
  7. Englekirk, R.E. (2008), "A call for change in seismic design procedures", Struct. Des. Tall Spec. Bldgs, 17, 1005-1013. https://doi.org/10.1002/tal.490
  8. Jalali, R.S. and Trifunac, M.D. (2008), "A note on strength-reduction factors for design of structures near earthquake faults", Soil Dyn. Earthq. Eng., 27, 212-222.
  9. Karavasilis, T.L., Bazeos, N. and Beskos, D.E. (2007), "Behavior factor for performance-based seismic design of plane steel moment resisting frames", J. Earthq. Eng., 11, 531-559. https://doi.org/10.1080/13632460601031284
  10. Kunnath, S.K. and Chai, Y.H. (2004), "Cumulative damage-based inelastic cyclic demand spectrum", Earthq. Eng. Struct. Dyn., 33, 499-520. https://doi.org/10.1002/eqe.363
  11. Lin, Y.Y. and Chang, K.C. (2003), "Study on damping reduction factor for buildings under earthquake ground motions", J. Struct. Eng. - ASCE, 129(2), 206-214. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(206)
  12. Lu, Y. and Wei, J. (2008), "Damage-based inelastic response spectra for seismic design incorporating performance considerations," Soil Dyn. Earthq. Eng., 28, 536-549. https://doi.org/10.1016/j.soildyn.2007.08.002
  13. Mavroeidis, G.P., Dong, G. and Papageorgiou, A.S. (2004), "Near-fault ground motions, and the response of elastic and inelastic single-degree-of-freedom (SDOF) systems", Earthq. Eng. Struct. Dyn., 33, 1023-1049 https://doi.org/10.1002/eqe.391
  14. Mazzolani, F.M. and Piluso, V. (1996), Theory and design of seismic resistant steel frames, E & FN Spon, London.
  15. Miranda, E. and Bertero, V.V. (1994), "Evaluation of strength reduction factors for earthquake-resistant design", Earthq. Spectra, 10(2), 357-379. https://doi.org/10.1193/1.1585778
  16. Mwafy, A.M. and Elnashai, A.S. (2002), "Calibration of force reduction factors of rc buildings", J. Earthq. Eng., 6(2), 239-273.
  17. Nassar, A.A. and Krawinkler, H. (1991), Seismic demands of SDOF and MDOF structures, John A. Blume Earthquake Engineering Centre Report No.95, Department of Civil and Environmental Engineering, Stanford University.
  18. Ordaz, M. and Perez-Rocha, L.E. (1998), "Estimation of strength-reduction factors for elastoplastic systems: a new approach", Earthq. Eng. Struct. Dyn., 24, 889-901.
  19. Papagiannopoulos, G.A. (2008), Seismic design of steel structures using equivalent modal damping ratios or modal strength reduction factors, Ph.D. Thesis (in Greek), Department of Civil Engineering, University of Patras, Greece, e-link address: http://nemertes.lis.upatras.gr/dspace/handle/123456789/2113.
  20. Papagiannopoulos, G.A. and Beskos, D.E. (2010), "Towards a seismic design method for plane steel frames by using equivalent modal damping ratios", Soil Dyn. Earth. Eng., 30, 1106-1118. https://doi.org/10.1016/j.soildyn.2010.04.021
  21. Prakash, V., Powell, G.H. and Campbell, S. (1993), DRAIN 2DX - Base program description and user guide, Version 1.10., Report No.UCB/SEMM-93/17, University of California at Berkeley.
  22. SAP2000 (2005), Static and dynamic analysis finite element analysis of structures, Version 9.1.4., Computers and Structures Inc., Berkeley, California.
  23. Seneviratna, G.D.P.K. and Krawinkler, H. (1997), Evaluation of seismic MDOF effects for seismic design, John A. Blume Earthquake Engineering Centre Report No.120, Department of Civil and Environmental Engineering, Stanford University.
  24. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M. (2008), "Estimating the higher-mode response of ductile structures", J. Earthq. Eng., 12, 456-472. https://doi.org/10.1080/13632460701512399
  25. Takewaki, I. (1997), "Design-oriented ductility bound of a plane frame under seismic loading", J. Vib. Control, 3, 411-434. https://doi.org/10.1177/107754639700300404
  26. Veletsos, A.S. and Vann, W.P. (1971), "Response of ground-excited elastoplastic systems", J. Struct. Division - ASCE, 97, (ST4), 1257-1281.
  27. Vidic, T., Fajfar, P. and Fischinger, M. (1994), "Consistent inelastic design spectra: strength and displacement", Earthq. Eng. Struct. Dyn., 23, 507-521. https://doi.org/10.1002/eqe.4290230504
  28. Weitzmann, R., Ohsaki, M. and Nakashima, M. (2006), "Simplified methods for design of base-isolated structures in the long-period high-damping range", Earthq. Eng. Struct. Dyn., 35, 497-515. https://doi.org/10.1002/eqe.544

피인용 문헌

  1. Modal strength reduction factors for seismic design of steel moment resisting frames vol.154, 2018, https://doi.org/10.1016/j.engstruct.2017.10.071
  2. 13.15: Seismic design of steel moment resisting frames: Modal strength reduction factors including strength deterioration and panel zone effects vol.1, pp.2-3, 2017, https://doi.org/10.1002/cepa.438
  3. Degradation and damage behaviors of steel frame welded connections vol.15, pp.4, 2013, https://doi.org/10.12989/scs.2013.15.4.357
  4. Stochastic-based damping reduction factors vol.80, 2016, https://doi.org/10.1016/j.soildyn.2015.09.014
  5. Recovery of spectral absolute acceleration and spectral relative velocity from their pseudo-spectral counterparts vol.4, pp.5, 2013, https://doi.org/10.12989/eas.2013.4.5.489
  6. A seismic design method for reinforced concrete moment resisting frames using modal strength reduction factors pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0436-3
  7. A comparison of three performance-based seismic design methods for plane steel braced frames vol.18, pp.1, 2011, https://doi.org/10.12989/eas.2020.18.1.027
  8. Seismic assessment of thin steel plate shear walls with outrigger system vol.74, pp.2, 2011, https://doi.org/10.12989/sem.2020.74.2.267
  9. Relationship of strength reduction factor and maximum ductility factor for seismic design of one-storey industrial steel frames vol.21, pp.5, 2020, https://doi.org/10.1007/s42107-020-00244-0
  10. State-of-the-art review: Reduction factor of traditional steel moment resisting, braced or eccentrically braced systems vol.35, pp.None, 2011, https://doi.org/10.1016/j.istruc.2021.11.028