Structural Engineering and Mechanics

  • 제37권6호
  • /
  • Pages.649-669
  • /
  • 2011
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Compressive behavior of short fibrous reinforced concrete members with square cross-section

  • Campione, G. (Dipartimento di Ingegneria Strutturale e Geotecnica, Universita di Palermo)
  • 투고 : 2009.07.28
  • 심사 : 2010.11.23
  • 발행 : 2011.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper an analytical model is presented that addresses the compressive response of short-fiber reinforced concrete members (FRC) with hooked steel fibers. This model is applicable to a wide range of concrete strengths and accounts for the interaction between the cover spalling and the concrete core confinement induced by transverse steel stirrups and also for buckling of longitudinal reinforcing bars. The load-shortening curves generated here analytically fit existing experimental data well.

키워드

참고문헌

  1. ACI Committee 318 (2005), "Building code requirements for reinforced concrete (ACI 318-95), and Commentary ACI 318RM-02", American Concrete Institute, Detroit, Michigan.
  2. Adepegba, D. and Regan, P. (1981), "Performance of steel fibre reinforced concrete in axially loaded short columns", Int. J. Cement Light-W. Concrete, 3(4), 255-259. https://doi.org/10.1016/0262-5075(81)90035-X
  3. Ahmad, S.H. and Shah, S.P. (1985), "Behaviour of hoop confined concrete under high strain rates", ACI Mater. J., 82(5), 634-647.
  4. Aoude, H., Cook, W.D. and Michell, D. (2009), "Behavior of columns constructed with fibers and self-consolidating concrete", ACI Struct. J., 106(3), 349-357.
  5. Barros, J.A.O. and Figureiras, J.A. (1999), "Flexural behaviour of SFRC: testing and modeling", J. Mater. Civil Eng.-ASCE, 11(4), 331-339. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(331)
  6. Bencardino, F., Rizzuti, L. and Spadea, G. (2008), "Stress-strain behavior of steel fiber-reinforced concrete in compression", J. Mater. Civil Eng.-ASCE, 20(3), 255-263. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:3(255)
  7. Bentur, A. and Mindess, S. (1990), Fibre Reinforced Cementitious Composites, Elsevier Applied Science, Publishers Ltd., New York.
  8. Campione, G., Mindess, S. and Zingone, G. (1999), "Compressive stress-strain behavior of normal and high strength carbon-fibre concrete reinforced with steel spirals", ACI Mater. J., 91(1), 27-34.
  9. Campione, G. and La Mendola, L. (2001), "Stress-strain behavior in compression of steel - fibre lightweight concrete under monotonic and cyclic loads", Proceedings of the Third Conference on Earthquake Resistant Engineering Structures, Malaga, Spain, September.
  10. Campione, G. (2002), "The effects of fibres on the confinement models for concrete columns", Can. J. Civil Eng., 29, 742-750. https://doi.org/10.1139/l02-066
  11. Campione, G., La Mendola, L. and Papia, M. (2006), "Ultimate shear strength of fibrous reinforced concrete beams with stirrup", Struct. Eng. Mech., 24(1), 107-136. https://doi.org/10.12989/sem.2006.24.1.107
  12. Campione, G., Fossetti, M., Papia, M. and Priolo, S. (2006), "Experimental analysis of flexural behavior of fibrous reinforced concrete columns", Proceedings of the CTE Conference, Parma, Italy, September. (in Italian)
  13. Campione, G. (2008), "Simplified flexural response of fibrous concrete beams", J. Mater. Civil Eng.-ASCE, 20(4), 283-293. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:4(283)
  14. Campione, G., Cucchiara, C., Mangiavillano, M.L. and Miraglia, N. (2009), "Flexural response of ordinary and fibrous reinforced concrete deep beams", Atti del $13^{\circ}$ Convegno Nazionale L'Ingegneria Sismica in Italia, Bologna, Giugno-Luglio. (in Italian)
  15. Cusson, D. and Paultre, P. (1994), "High-strength concrete columns confined by rectangular ties", J. Struct. Eng.- ASCE, 120(3), 783-804. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(783)
  16. Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high-strength concrete", J. Struct. Eng.- ASCE, 121(3), 468-477. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(468)
  17. Demeke, A. and Tegos, I.A. (1994), "Steel fiber reinforced concrete in biaxial stress tension-compression conditions", ACI Struct. J., 91(5), 579-584.
  18. Dhakal, R.P. and Maekawa, K. (2002), "Reinforcement stability and fracture of cover concrete in RC members", J. Struct. Eng.-ASCE, 128(10), 1253-1262. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1253)
  19. Dhakal, R.P. (2006), "Post-peak response analysis of SFRC columns including spalling and buckling", Struct. Eng. Mech., 22(3), 311-330. https://doi.org/10.12989/sem.2006.22.3.311
  20. Dhakal, R.P. and Maekawa, K. (2002), "Modeling for post-yield buckling of reinforcement", J. Struct. Eng.- ASCE, 128(9), 1139-1147. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1139)
  21. Elwi, A.A. and Murray, D.W. (1979), "A 3D hypoelastic concrete constitutive relationship", J. Eng. Mech.- ASCE, 105, 623-641.
  22. Ezeldin, A.S. and Balaguru, P.N. (1992), "Normal and high strength fibre reinforced concrete under compression", J. Mater. Civil Eng.-ASCE, 4(4), 415-427. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
  23. Fanella, D.A. and Naaman, A.E. (1985), "Stress-strain properties of fibre reinforced mortar in compression", ACI J., Proceedings No. 82-41, 475-483.
  24. Foster, S.J. (2001), "On behavior of high-strength concrete columns, cover spalling, steel fibres, and ductility", ACI Struct. J., 98(4), 583-589.
  25. Foster, S.J. and Attard, M.M. (2001), "Strength and ductility of fibre-reinforced high-strength concrete columns", J. Struct. Eng.-ASCE, 127(1), 28-34. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(28)
  26. Genesan, N. and Murthy, J.V.R. (1990), "Strength and behavior of confined steel fibre reinforced concrete columns", ACI Mater. J., 87(3), 221-227.
  27. Hsu, L.S. and Hsu, C.T. (1994), "Stress-strain behaviour of steel-fiber-high strength concrete under compression", ACI Struct. J., 91(4), 448-457.
  28. Lim, T.Y., Parasivam, P. and Lee, S.L. (1987), "An analytical model for tensile behaviour of steel fibre concrete", ACI Mater. J., 84(4), 286-298.
  29. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng.-ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  30. Mansur, M.A., Ong, K.C.G. and Parasivam, P. (1986), "Shear strength of fibrous concrete beams without stirrups", J. Struct. Eng.-ASCE, 112(9), 2066-2079. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:9(2066)
  31. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999), "Stress-strain curves for steel-fibre reinforced concrete under compression", Cement Concrete Compos., 21, 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  32. Naaman, A.E. (2003), "Strain hardening and deflection hardening fibre reinforced cement composites", Proceedings of the IV International RILEM Workshop on High Performance Fibre Reinforced Cement Composites (HPFRCC4), Ann Arbour, MI, US.
  33. Papia, M., Russo, G. and Zingone, G. (1988), "Instability of longitudinal bars in RC columns", J. Struct. Eng.- ASCE, 114(2), 445-461. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:2(445)
  34. Quintero-Febres, C.G., Parra-Montesionos, G. and Wight, J.K. (2006), "Strength of struts in deep concrete members designed using strut-and-tie method", ACI Struct. J., 103(4), 577-586.
  35. Razvi, R. and Saatcioglu, M. (1999), "Confinement model for high-strength concrete", J. Struct. Eng.-ASCE, 125(3), 281-289. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(281)
  36. Russo, G. and Terenzani, L. (2001), "Non linear buckling model for the longitudinal reinforcement in RC columns", Studies and Research Graduate school in concrete structures - Fratelli Pesenti, Politecnico di Milano, Italy, Vol. 22, 303-227.
  37. Sargin, M. (1971), "Stress-strain relationship for concrete and the analysis od structural concrete sections", Study No. 4, Solid Mechanics Division, University of Waterloo.
  38. Saeker, P.K. (2001), "Fibre reinforced high strength concrete columns", Proceedings of the International Conference on Adding Value Through Innovation, Concrete Inst. of Australia, Perth, September.
  39. Soroushian, P. and Lee, C.D. (1989), "Constitutive modelling of steel fibre reinforced concrete under direct tension and compression", Fibre Reinforced Cements and Concrete (Eds. Swamy, R.N and Barr, B.), Recent Developments, 363-375.
  40. Zaina, M. and Foster, S.J. (2005), "Testing of concentric and eccentrically loaded fibre-reinforced HSC columns", UNICIV REPORT NoR-437, The University of New South Wales Sydney 2052 Australia ISBN:85841 4040 X.

피인용 문헌

  1. Buckling of steel and Ni-Ti reinforcements in very high performance concrete (VHPC) elements vol.160, 2018, https://doi.org/10.1016/j.conbuildmat.2017.11.113
  2. Mixed model for the analytical determination of critical buckling load of passive reinforcement in compressed RC and FRC elements under monotonic loading vol.150, 2017, https://doi.org/10.1016/j.engstruct.2017.07.026
  3. RC columns externally strengthened with RC jackets vol.47, pp.10, 2014, https://doi.org/10.1617/s11527-013-0146-x
  4. Damage-Resistant Reinforced Concrete Low-Rise Walls with Hybrid GFRP-Steel Reinforcement and Steel Fibers vol.22, pp.2, 2018, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000834
  5. Impact resistance of polypropylene fiber reinforced concrete two-way slabs vol.62, pp.3, 2017, https://doi.org/10.12989/sem.2017.62.3.373
  6. Required tie spacing to prevent inelastic local buckling of longitudinal reinforcements in RC and FRC elements vol.160, pp.None, 2011, https://doi.org/10.1016/j.engstruct.2018.01.048
  7. Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars vol.168, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.05.027
  8. Analytical model for flexural and shear strength of normal and high-strength concrete beams vol.78, pp.2, 2011, https://doi.org/10.12989/sem.2021.78.2.199