Ar 플라즈마 처리에 따른 Al-doped ZnO 박막특성변화

The effect of Ar plasma treatment on Al-doped ZnO

  • Jin, Sun-Moon (Department of Electronic Engineering, Sun Moon University) ;
  • Ahn, Chul-Woo (Department of Electronic Engineering, Sun Moon University) ;
  • Cho, Nam-In (Department of Electronic Engineering, Sun Moon University) ;
  • Nam, Hyoung-Gin (Department of Electronic Engineering, Sun Moon University)
  • 투고 : 2011.10.31
  • 심사 : 2011.12.15
  • 발행 : 2011.12.31

초록

In this study, we investigated the effects of the post Ar plasma treatment at different RF powers for various durations on electrical, structural, and optical properties of relatively thin Al-doped zinc oxide films. The sheet resistance was observed to decrease rapidly for the first 5min, beyond which the resistance apparently saturated. As the RF power increased, the grain size and the interplanar distance of (002) planes also increased. The observed decrease in sheet resistance was stated to be a consequence of Al and/or Zn interstitials as well as grain growth. It was also found that Ar plasma treatment increased the transmittance of Al-doped zinc oxide films in most of the visible light range below the blue light.

키워드

참고문헌

  1. B. Nasr, S. Dasgupta, D. Wang, N. Mechau, R. Kruk, H. Hahn, "Electrical resistivity of nanocrystalline Aldoped zinc oxide films as a function of Al content and the degree of its segregation at the grain boundaries", Journal of Applied Physics, Vol.108, pp. 103721, 2010. https://doi.org/10.1063/1.3511346
  2. J. H. Kim, B. D. Ahn, C. H. Lee, K. A. Jeon, H. S. Kang, S. Y. Lee, "Effect of rapid thermal annealing on electrical and optical properties of Ga doped ZnO thin films prepared at room temperature", Journal of Applied Physics, Vol. 100, pp. 113515, 2006. https://doi.org/10.1063/1.2369544
  3. D. H. Shin, Y. H. Kim, J. W. Han, K. M. Moon, R. I. Murakami, "Effect of process parameters on electrical, optical properties of IZO films produced by inclination opposite target type DC magnetron sputtering", Transactions of Nonferrous Metals Society of China, Vol. 19, pp. 997, 2009. https://doi.org/10.1016/S1003-6326(08)60394-5
  4. Mandar J. Gadre, T. L. Alford, "Highest transmittance and high-mobility amorphous indium gallium zinc oxide films on flexible substrate by room-temperature deposition and post-deposition anneals", Applied Physics Letters, Vol. 99, pp. 051901, 2011. https://doi.org/10.1063/1.3619196
  5. H. J. Cho, S. U. lee, B. Hong, Y. D. Shin, J. Y. Ju, H. D. Kim, M. G. Park, W. S. Choi, "The effect of annealing on Al-doped ZnO films deposited by RF magnetron sputtering method for transparent electrodes", Thin Solid Films, Vol. 518, pp. 2941, 2010. https://doi.org/10.1016/j.tsf.2009.10.130
  6. B. Z. Dong, H. Hu, G. J. Fang, X. Z. Zhao, "Comprehensive investigation of structural, electrical, and optical properties for ZnO:Al films deposited at different substrate temperature and oxygen ambient", Journal of Applied Physics, Vol. 103, pp. 073711, 2008. https://doi.org/10.1063/1.2901024
  7. M. D. McCluskey, S. J. Jokela, "Defects in ZnO" Journal of Applied Physics, Vol. 106, pp.071101, 2009. https://doi.org/10.1063/1.3216464
  8. C. Y. Hsu, Y. C. Lin, L. M. Kao, Y. C. Lin, "Effect of deposition parameters and annealing temperature on the structure and properties of Al-doped ZnO thin films", Materials Chemistry and Physics, Vol.124, pp. 330-335, 2010. https://doi.org/10.1016/j.matchemphys.2010.06.042