탄소나노튜브 함유 Solderable 도전성 접착제의 전기적/기계적 접합특성 평가

Electrical and Mechanical Properties of CNT-filled Solderable Electrically Conductive Adhesive

  • 투고 : 2011.10.26
  • 심사 : 2011.12.15
  • 발행 : 2011.12.31

초록

In this paper, novel carbon nanotube (CNT)-filled Solderable electrically conductive adhesive (ECA) and joining process have been developed. To investigate the bonding characteristics of CNT-filled Solderable ECA, three types of Solderable ECAs with different CNT weight percent (0, 0.1, 1wt%) were formulated. For a joining process, the quad flat package (QFP) chip was used. The QFP chip had a size of $14{\times}14{\times}2.7$ mm and a 1 mm lead pitch. The test board had a Cu daisy-chained pattern with 18 ${\mu}m$ thick. After the bonding process, the bonding characteristics such as morphology of conduction path, electrical resistance and pull strength were measured for each formulated ECAs. As a result, the electrical and mechanical bonding characteristics for a QFP joints using CNT-filled ECA were improved about 10% compared to those of QFP joints using ECA without CNT.

키워드

참고문헌

  1. Li, Y., and Wong, C. P., "Recent Advances of Conductive Adhesives as a Lead-Free Alternative in Electronic Packaging: Materials, Processing, Reliability and Applications", Materials Science and Engineering, Vol. 51, pp. 1-35, 2006. https://doi.org/10.1016/j.mser.2006.01.001
  2. Kim, H. K., and Shi, F. G., "Electrical Reliability of Electrically Conductive Adhesive Joints: Dependence on Curing Condition and Current Density", Microelectronics Journal, Vol. 32, pp. 315-321, 2001. https://doi.org/10.1016/S0026-2692(01)00007-6
  3. Wojciechowski, D., Vanfleteren, J., Reese, E., and Hagendorn, H. W., "Electro-Conductive Adhesives for High Density Package and Flip-Chip Interconnections", Microelectronics Reliability, Vol. 40, pp. 1215-1226, 2000. https://doi.org/10.1016/S0026-2714(00)00049-4
  4. Tong, Q. K., Markley, D. K., Frederickson, G., Kuder, R., and Lu, D., "Conductive Adhesives with Stable Contact Resistance and Superior Impact Performance", Electronic Components and Technology Conference, Vol. 1-6, pp. 347-352, 1999.
  5. Yim, B. S., Kim, J. M., Jeon, S. H., Lee, S. H., Kim, J. H., Han, J. G., and Cho, M. H., "Hybrid Interconnection Process Using Solderable ICAs(Isotropic Conductive Adhesives) with Low-Melting-Point Alloy Fillers", Materials Transactions, Vol. 50, pp. 2649-2655, 2009. https://doi.org/10.2320/matertrans.M2009109
  6. Zhan, G. D., Kuntz, J. D., Wan, J., and Mukherjee, A. K., "Single-Wall Carbon Nanotubes as Attractive Toughening Agents in Alumina-Based Nanocomposites", Nature Materials, Vol. 2, pp. 38-42, 2003. https://doi.org/10.1038/nmat793
  7. Wu, H. P., Wu, X. J., Ge, M. Y., Zhang, G. Q., Wang, Y. W., and Jiang J., "Properties Investigation on Isotropical Conductive Adhesives Filled with Silver Coated Carbon Nanotubes", Composites Science and Technology, Vol. 67, pp. 1182-1186, 2007. https://doi.org/10.1016/j.compscitech.2006.05.010
  8. Yu, S., Tong, M. N., and Critchlow, G., "Wedge Test of Carbon-Nanotube-Reinforced Epoxy Adhesive Joints", Journal of Applied Polymer Science, Vol. 111, pp. 2957-2962, 2009. https://doi.org/10.1002/app.29294