DOI QR코드

DOI QR Code

Assessment of Performance of Motor System for City Bus

노선버스용 구동모터 시스템의 성능평가

  • Lee, Yoon-Ki (Dept. of Automobiles, Chosun Univ. College of Science & Technology) ;
  • Myong, Kwang-Jae (Dept. of Automobiles, Chosun Univ. College of Science & Technology)
  • Received : 2010.08.31
  • Accepted : 2010.12.23
  • Published : 2011.02.01

Abstract

Recently, research and development of a hybrid system for passenger cars as well as for heavy-duty vehicles has become more intensive. An electric powertrain system using an electric motor can replace conventional gasoline and diesel engines. The electric motor has a higher efficiency, better acceleration performance, and is more comfortable than conventional powertrain systems; however, new methods for assessing power performance and energy convergence efficiency have to be investigated because the characteristics of an electric motor are entirely different from those of an internal combustion engine (ICE). In this study, an experiment was carried out on a motor (PMSM: Permanent Magnet Synchronous Motor) test bench. One simple driving mode and four other driving modes identified from real-world driving data of a city bus were selected to perform the experiment on the motor test bench. Then, methods for assessing the acceleration performance, energy convergence efficiency, regenerative effect, etc., were investigated. It was found that the energy efficiency of PMSM was about 90% and that 40% of demand energy was regenerated.

최근, 승용차는 물론 대형차에서도 하이브리드시스템 등의 전기동력방식을 도입하려는 연구개발이 활발하다. 기존의 내연기관을 대체하는 전기구동모터를 이용하여 차량을 구동하는 전기동력방식을 채용하는 것이 한층 더 효율적이며 가속성능, 승차감 등의 면에서도 유리한 점이 많다. 그러나 모터는 엔진과 전혀 다른 특징을 갖기 때문에 동력성능과 에너지효율에 관한 적합한 평가수법을 검토할 필요가 있다. 본 논문에서는 전기구동버스에 대한 구동모터 시스템을 다이나모미터 상에서 운전하여, 노선버스의 운행패턴을 반영한 모의운전을 실시, 가속성능 및 에너지변환효율, 회생효과의 평가방법 등을 고찰하였다. 그 결과 실 주행 패턴운전에 대한 모터일률, 전력량 등의 계측으로부터 모터 변환효율은 90% 전후, 회생전력량은 요구전력량의 40% 이상으로 평가되었다.

Keywords

References

  1. Kabe, S., Yamanaka, A. and Osa, M., 2005, “Research and Development in Motor Drive System for City Traffic Vehicle,” JSAE Transaction Mar. 2005, Vol. 36, No. 2, pp. 159-164.
  2. Ogata, et al., 2001, “Development of HEV Non-Step Bus,” Proceedings of 2001 JSAE Annual Congress, No. 27-01, pp. 9-12.
  3. Hayashida, et al., 2002, Proceedings of 2002 JSAE Annual Congress,No. 82-02, pp. 5-8.
  4. Kim, D. C., Park, J. J., Cho, S. T. and Kim, C. S., 2002, “Power Transmission for HEV and Control Technology,” Journal of the KSME, Vol. 42, No. 9, pp. 367-340.
  5. Kim, H. S., Yeo, H., Oh, K. C. and Kim, D. H., 2005. 5, “Current Status and Prospect of Hybrid Electric Vehicle,” Journal of the KSME, Vol. 45, No. 5, pp. 47-52.
  6. Roh, C. W. and Kim, M. S., 2009. 4, “Study on the Fueling Economic Feasibility of Plug-in Hybrid Electric Vehicle,” Transactins of the KSME B, Vol. 33, No. 4, pp. 255-263. https://doi.org/10.3795/KSME-B.2009.33.4.255
  7. Narusawa, K., Hayashida, M.and Myong, K. J., 2008, "Development and Dissemination of the IPT Hybrid Bus,” Proceedings of 2008 JSAE Annual Congress,No. 49-08.
  8. Inoue, S., Ishihara, H., 2007, " Development of Experimental IPT Hybrid Bus - Design of Vehicle System and Evalution of the IPT Bus -,” Proceedings of 2007 JSAE Annual Congress,No. 91-07, pp. 1-6.
  9. Kumagai, N., Motooka, A., Susuki, Y. and Takeda, N., 2001, " Super HEV System for Super Low Floor City-bus,” SAE 2001 World Congress, Paper No. 2001-01-0956.