• 전자공학회논문지SC
• /
• 제48권6호
• /
• pp.71-81
• /
• 2011

일반적인 내연기관 자동차와는 달리, 전기자동차는 파워트레인을 구성하는 배터리, 인버터, 모터 등의 전기 동력 시스템들이 차량의 주행성능과 동역학 특성에 직접적인 영향을 준다. 따라서 전기 차량의 최종 운동 및 동특성을 예측하기 위해서, 기계 및 전기전자 복합 시스템을 세부적으로 모델링하고 이를 통한 전체 파워트레인의 해석이 필요하다. 본 논문에서는 전기자동차의 최종 출력 성능을 예측하고 분석하기 위한 전기자동차의 파워트레인 시스템의 동적 모델을 유도하였다. 전기적인 신호로부터 최종 기계 동력 시스템으로 전달되는 입출력 변수의 상관관계를 수학적으로 모델링하여 개발하였다. 또한, 전기자동차의 동특성을 시뮬레이션 할 수 있는 기준모델을 Matlab/Simulink 플랫폼 기반으로 개발하였으며, 이를 이용하여 유도된 수학적 분석 모델을 검증하였다. 이를 통하여 속도, 가속도, 추진력 등의 주요 차량 주행성능을 비교 분석하였다.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.771-780
• /
• 2007

In recent studies, various types of multi mode electric variable transmissions of hybrid electric vehicles have been proposed. Multi mode electric variable transmission consists of two or more different types of planetary gear hybrid powertrain system(PGHP), which can change its power flow type by means of clutches for improving transmission efficiencies. Generally, the power flows can be classified into three different types such as input split, output split and compound split. In this study, we analyzed power transmission characteristics of the possible six input split systems, and found the suitable system for single or multi mode hybrid powertrain. The input split system used in PRIUS is identified as a best system for single mode, and moreover we identified some suitable systems for dual mode.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.591-600
• /
• 2015

The efficiency of a powertrain system of hybrid vehicle is highly dependent on the design and control of the hybrid powertrain system. In other words, the optimal design of the powertrain systems is coupled with optimal control of the powertrain system. Therefore, the solution of an optimal design problem for hybrid vehicles is computationally and timely very expensive. For example, dynamic programming, which is a recursive optimization method, is usually used to evaluate the best fuel economy of certain hybrid vehicle design, and, thus, the evaluation takes tens of minutes to several hours. This research aims to accelerate the speed of efficiency evaluation of hybrid vehicles. We suggest a mathematical treat and a methodological treat to reduce the computational load. The mathematical treat is that the dynamics of system is discretized with sparse sampling time without loss of energy balance. The methodological treat is that the efficiency of the hybrid vehicle is inferred by characteristic loss evaluation that is computationally inexpensive. With the suggested methodology, evaluating a design candidate of hybrid powertrain system is taken few minutes, which was taken several hours when dynamic programming is used.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.330-337
• /
• 2016

In this paper, component sizing and analysis of the novel plug-in hybrid electric vehicle powertrain configuration is conducted. Newly proposed powertrain configuration in prior study has an internal combustion engine and two electric motors. To optimize component size of the vehicle system and reduction gear ratio, component sizing methodology is proposed and conducted. Required power for vehicle's dynamic performance is calculated to decide minimum power requirement of powertrain component combination. Component size of engine and electric motor are optimized using vehicle simulation to maximize fuel economy performance. Optimized powertrain configuration and vehicle simulation results present validation of newly proposed vehicle system.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.138-144
• /
• 2012

Recent environmental issues such as exhaust gas and greenhouse effect make the agricultural machinery market takes into account the hybrid and electric propulsion technology used in automotive engineering. Generally the agricultural machinery, particularly an agricultural tractor, needs large load capacity and long continuous operating time comparing with conventional vehicles. In case of a pure electric tractor, it is necessary for considering large capacity batteries and long charging time. Therefore we take an AER extended PHEV (All Electric Range extended Plug-in Hybrid Electric Vehicle) power transmission system in developing an electric tractor in this study. First we propose a PHEV powertrain structure in order to substitute the conventional diesel engine equipped tractor. And we performed the road tests using a conventional mechanical tractor with various load conditions, which were classified and statistically treated real agricultural works. The test results were analysed with respect to the power characteristics of the power source. Finally using the test result, we designed two-stepped reduction gear ratios in the proposed an electric tractor powertrain for carrying out typical agricultural works.

• 실천공학교육논문지
• /
• 제15권1호
• /
• pp.53-61
• /
• 2023

근현대 자동차 신산업 분야에서 가장 큰 핵심 과제는 2035년 EU 연합의 배출가스 0%를 목적으로 하는 친환경 차량 개발에 있으며, 이에 따라 전기자동차로 산업이 급변하는 시대에서 EV전기차에 대한 교육훈련이 절실한 상황인데, 본 연구에서는 기존 내연기관차와 동일하게 사용하는 Chassis Platform(Body, Tire 등)을 제외한 핵심적인 EV 파워트레인 시스템 시뮬레이터를 개발함으로써, 기계공학적, 전기공학적, 전자공학적 활용 등 EV 파워트레인 시스템을 이해하고 본 과정을 통해 공학적, 융합적 개발 능력을 키우는 매체로 활용하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.852-858
• /
• 2011

This paper is aiming to estimate the mutual influence of the stack cooling performances with the operation modes of the thermal management system for the hydrogen fuel cell vehicles. The heat capacity of the thermal management system was measured by varying the operating modes such as stack cooling heat exchanger only (Mode 1), stack cooling and electric devices cooling heat exchangers (Mode 2), and stack cooling and electric devices cooling heat exchangers with an operation of the condenser (Mode 3).As the results, Performance of the thermal management system (TMS) at Mode 3 decreased up to 34.0%, compared with the result of the Mode 1. In addition, in order to optimize the performance of TMS, the entropy change of stack cooling heat exchanger using irreversibility analysis technique was analyzed with the relationship between entropy generation and entering air velocity of the thermal management system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.109-112
• /
• 2006

In the recent studies, various types of multi mode electric variable transmission for hybrid electric vehicle have been proposed. Multi mode electric variable transmission consists of two or more different type planetary gear hybrid powertrain system(PGHP), which can change its power flow type by means of clutches for improving transmission efficiencies. Generally the power flows can be classified into three different types such as Input split, output split nd compound split. In This paper, we present velocity and torque equations of the input-split powertrain and analyze its optimal Performances. There are six combinations of the input-split powertrain, each combination has various lever length. We find optimal planetary gear ratios for fuel economy and acceleration performance, and compare performances of each combination.

• 한국전자통신학회논문지
• /
• 제16권5호
• /
• pp.845-850
• /
• 2021

본 연구에서는 전기 자동차(EV : Electric Vehicle) 파워트레인의 에너지 변환 특성과 설계를 수행하였다. 그리고 EV 파워트레인의 동력원으로서 영구자석 매입형 동기 모터(IPMSM : Interior Permanent Magnet Synchronous Motor)를 대상으로 하였으며 제어를 수행하였다. IPMSM을 구동하기 위해서는 두 가지 영역인 일정한 토크와 일정한 출력(약계자) 영역이 사용되며, IPMSM을 위한 제어 시스템의 설계는 d-q 레퍼런스 프레임(벡터 제어)을 바탕으로 구성하였다. IPMSM의 두 영역에서 나타나는 모터 토크의 정적 특성을 결정하기 위해 IPMSM의 토크제어 시스템과 d축 전류 제어 시스템을 제안 및 구현하였다. 특성해석을 위해서 Matlab-Simulink 소프트웨어를 사용하였다. 최종적으로 실제 차량 사양을 기준으로 EV 차량 레벨 조건으로 변경하여 파워트레인 모델에 IPMSM을 적용하였으며 제안된 제어 시스템의 시뮬레이션 결과를 수행했고 특성을 분석하였다.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.120-127
• /
• 2013

Hybrid electric vehicles have applied electric parts for saving fuel consumption and reducing levels of environmental pollution. Electrification of automobiles is indispensable for entering into global market because of enhanced environment restriction. ISG (Integrated Starter & Generator) system is one of main electric parts and can improve fuel efficiency more than other components by using Idle Stop & Go function and regenerative braking system. However, if ISG motor and inverter work under the continuously high load condition, it will make them the decrease of performance and durability. So the ISG motor and inverter need to properly design the cooling system of them. In this study, we suggested the enhancement points by modifying the thermal design of ISG motor and then confirmed the improvement of the cooling performance.