Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study of the Effectiveness of Hollow Ratio on Cutting Force of Diamond Core Drill

다이아몬드 코어드릴의 중공비가 절삭력에 미치는 영향

  • 김광민 (한국폴리텍VI대학구미캠퍼스 자동화시스템과) ;
  • 최성대 (금오공과대학교 지능기계공학과) ;
  • 홍영배 ((주)금강쿼츠)
  • Received : 2011.04.01
  • Accepted : 2011.04.18
  • Published : 2011.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the variation of the cutting forces generated in the machining process were evaluated experimentally. A material of $Al_{2}O_{3}$ ceramic and a tool of the dynamometer were used for the measurements of the cutting forces. With the constant rates of the feed and the tool rotation, the cutting forces were measured along three axial directions(X, Y, Z axis) for the various values of the hollow ratio. It was found that the cutting force be increasing linearly along the direction of Z axis, but along X, Y axis be not varied. Also from the viewpoint of the precesses of the hole drilling, the cutting force was found to be increasing sharply at the beginning process, but from the eighth process be increasing smoothly. As conclusions, the cutting force generated by machining for the material of $Al_{2}O_{3}$ ceramic are influenced more significantly by the feed rate and the hollow ratio than by the tool rotational speed.

Keywords

References

  1. Park, S. H., Kim, K. M., Choi, S. D., and Hong, Y. B., "A Study on the Wearing Behavior of Diamond Tool used to Machining of Ceramics", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 73-79, 2011.
  2. Kim, T. Y., Shin, H. G., Kim, J. T., Kim, M. H., and Lee, H. G., "A Study on the Drilling Characteristics of a TiAlN Coated Twist Drill", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 3, No. 4, pp. 29-36, 2004.
  3. Tuersley, I. P., "Various Methods of Machining Advanced Ceramic Materials" Journal of Materials Processing Technology, Vol. 42, pp. 377-390, 1994. https://doi.org/10.1016/0924-0136(94)90144-9
  4. Imen, K., and Allen, S. D., "Pulse $CO_2$ Laser Drilling of Green Alumina Ceramic", IEEE Transactions on Advanced Packaging, Vol. 22, No. 4, pp. 620-623, 1999. https://doi.org/10.1109/6040.803454
  5. K. Masaki, N. Hisao, and K. Yuraka, "Large-sized Alumina Products for Next Generation LCD Manufacturing( in Japan)", Shinagawa Technical Report 48, pp. 139-140, 2005.
  6. H. Toshio, O. Seizo, H. Akemi, K. Kazumasa, K. Nobuhisa, O. Kiichi, S. Suguru, "Preparation of Large Alumina Ceramics by Slip Casting", Annual Report 10, Ceramics Res Lab., Nagoya Institute of Technology, pp. 23-29, 2001.
  7. F. F. Lange, "Power Processing Science and Technology for Increased Reliability", J. Am. Soc., 72(1), pp. 3-15, 1989.
  8. Doreau, F., Tari, G., Guedes, M., Chartier, T., Pagnoux, C. and Ferreira, J.M.F, "Mechanical and Lamination Properties of Alumina Gren Tapes Obtained by Aqueous Tape-casting", Journal of the European Ceramics Society, Vol. 19, pp. 2867-2873, 1999. https://doi.org/10.1016/S0955-2219(99)00052-7