한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제24권1호
  • /
  • Pages.22-26
  • /
  • 2011
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

원판형 유니몰프타입 압전 트랜스듀서의 발전특성 연구

A Study on Generating Characteristics of Circular Unimorph-Type Piezoelectric Transducer

  • Park, Choong-Hyo (Department of Electrical Engineering, Changwon National University) ;
  • Kim, Jong-Wook (Department of Electrical Engineering, Changwon National University) ;
  • Jeong, Seong-Su (Department of Electrical Engineering, Changwon National University) ;
  • Chong, Hyon-Ho (Korea Electrotechnology Research Institute) ;
  • Kim, Myong-Ho (Department of Ceramic & Science Engineering, Changwon National University) ;
  • Park, Tae-Gone (Department of Electrical Engineering, Changwon National University)
  • 투고 : 2010.05.14
  • 심사 : 2010.12.06
  • 발행 : 2011.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

On this paper, a circular unimorph-type piezoelectric transducer was proposed and studied. The transducer was fabricated by attaching a circular-shaped PZT ceramic to a circular plate of brass and output characteristics of the fabricated transducer were then analyzed and measured by changing driving points where the mechanical vibrations were applied. Two conditions depending on the location of vibration were respectively defined as a center forced model and an edge forced model. The resonance frequency and output voltage of the models were simulated by using ANSYS, a FEM(finite element method) program. Based on the results of the analyses, the vibration experiment was conducted and the output characteristics then measured through measurement equipment. As a result, the maximum output characteristics of two models were respectively generated at each resonance frequency and the resonance frequency of the center forced model was lower than the edge forced model.

키워드

참고문헌

  1. J. L. Gonzalez, A. Rubio, and F. Moll, International Journal of the Society of Materials Engineering for Resource, 7 (2001).
  2. H. I. Jun, J, KIEEME 9, 315 (2008).
  3. J. Kymissis, C. Kendall, J. Paradiso, and N. Gershendeld, Second IEEE International Conference on Wearable Computing, (1998) p. 34.
  4. T. G. Park, B. J. Kim, M. H. Kim, and K. Uchino, Jpn. J. Appl. Phys. 41, 7139 (2002). https://doi.org/10.1143/JJAP.41.7139
  5. K. Uchino, Piezoelectric Actuators and ultrasonic motors (Kluwer Academic Publishers, USA, 1997) p. 129.
  6. Phillips Components, Piezo Ceramic Products (Technical information, USA, 2000) p. 3.
  7. ANSYS, Inc., ANSYS Theory Manual all.
  8. H. W. Kim, Ph.D. Thesis, (Pennsylvania State University, Pennsylvania, 2006) p. 27.