References
- M. S. J. Hashmi, 2006, Aspects of Tube and Pipe Manufacturing Process: Meter to Nanometer Diameter, J. Mater. Process. Technol., Vol. 179, No. 1-3, pp. 5-10. https://doi.org/10.1016/j.jmatprotec.2006.03.104
- B. Brickstad, B. L. Josefson, 1998, A Parametric Study of Residual Stresses in Multi-pass Buttwelded Stainless Steel Pipes, Int. J. Press. Vessels Pip.,Vol. 75, No. 1, pp. 11-25. https://doi.org/10.1016/S0308-0161(97)00117-8
- C. K. Shih, R. Q. Hsu, C. Hung, 2002, A Study on Seamless Tube in the Planetary Rolling Process, J. Mater. Process. Technol., Vol. 121, No. 2, pp. 273- 284. https://doi.org/10.1016/S0924-0136(01)01265-1
- Z. Chena, K. Ikeda, T. Murakami, T. Takeda, J. X. Xie, 2003, Fabrication of Composite Pipes by Multi-billet Extrusion Technique, J. Mater. Process. Technol., Vol. 137, No. 1, pp. 10-16. https://doi.org/10.1016/S0924-0136(02)01052-X
- Y. S. Lee, S. H. Yoon, D. J. Yoon, E. Kim, 2009, Proc. Kor. Soc. Precis. Eng. 2009 Spring Meeting(ed. S. H. Lee), Proc. Kor. Soc. Precis. Eng., Jeju, Korea, p. 1021.
- H. S. Kim, S. W. Bae, Y. J. Kim, 2000, Proc. Kor. Soc. Precis. Eng. 2000 Spring Meeting(ed. S.H. Song), Proc. Kor. Soc. Precis. Eng., Pusan, Korea, pp. 120-123.
- M. Reggio, F. McKenty, Luc Gravel, J. Cortes, G. Morales, M. A. Ladron de Guevara, 2002, Computational Analysis of the Process for Manufacturing Seamless Tubes, App. Therm. Eng., Vol. 22, No. 4, pp. 459-470. https://doi.org/10.1016/S1359-4311(01)00093-X
- R. S. Lu, Y. F. Li, Q. Yu, 2001, On-line Measurement of the Straightness of Seamless Steel Pipes using Machine Vision Technique, Sens. Actuators, Vol. 94, No. 1, pp. 95-101. https://doi.org/10.1016/S0924-4247(01)00683-5