References
- J. S. Yoo, S. B. Kim, M. Y. Lee, H. Huh, 2008, Development of Al Crash Box for High Crashworthiness Enhancement, Trans. Mater. Process, Vol. 17, No 3, pp. 182-188. https://doi.org/10.5228/KSPP.2008.17.3.182
- J. W. Kim, I. S. Park, C. S. Lee, 2010, A Study on the Improvement of a Damageabillity and Repairability by Improving Mounting Structure of a Bumper for Passenger Cars, Trans. Kor. Soc. Mech. Eng, Vol. 34, No. 1, pp. 1-9. https://doi.org/10.3795/KSME-A.2010.34.1.1
- A. K. Kim, H. J. Lee, S. S. Cho, 2003, Proc. Kor. Soc. Mech. Eng. Conf.(ed. K.Y. Lee), Pusan, Korea, p. 19.
- S. Santos, T. Wierzbicki, M. Langseth, 2000, Experimental and Numerical Studies of Foam-Filled Sections, Int. J. Impact Eng., Vol. 24, No. 5, pp. 509-533. https://doi.org/10.1016/S0734-743X(99)00036-6
- B. D. Yoon, S. J. Heo, B. J. Kim, H. Y. Kim, J. K. Kim, H. Kang, J. M. Kim, 2000, Proc. Kor. Soc. Automot. Eng. Conf.(ed. B.S. Shim), Daegu, Korea,p. 951.
- H. Y. Kim, J. K. Kim, S. J. Heo, H. Kang, 2002, Design of the Impact Energy Absorbing Members and Evaluation of the Crashworthiness for Aluminum Intensive Vehicle, Trans. Kor. Soc. Automot. Eng., Vol. 10, No. 1, pp. 216-233.
- S. M. Oak, Y. H. Moon, 2001, Physical Modeling of Process Parameters for Aluminum-Foam Generation, Trans. Kor. Soc. Mech. Eng., Vol. 10, No 7, pp. 558-564.
- W. Chen, 2001, Experimental and Numerical Study on Bending Collapse of Aluminum Foam-filled Hat Profiles, Int. J. Solid Struct., Vol. 38, No. 44-45, pp. 7919-7944. https://doi.org/10.1016/S0020-7683(01)00094-4
- H. W. Song, Z. J. Fan, G. Yu, Q. C. Wang, A. Tobota, 2005, Partition Energy Absorption of Axially Crushed Aluminum Foam-filled Hat Sections, Int. J. Solid Struct., Vol. 42, No. 9-10, pp. 2575-2600. https://doi.org/10.1016/j.ijsolstr.2004.09.050
- H. R. Zarei, M. Kroger, 2008, Optimization of the Foam-filled Aluminum Tubes for Crush Box Application, Thin Walled Struct., Vol. 46, No. 2, pp. 214-221. https://doi.org/10.1016/j.tws.2007.07.016
- A. K. Toksoy, M. Guden, 2011, Partial Al Foam Filling of Commercial 1050H14 Al Crash Boxes: The Effect of Box Column Thickness and Foam Relative Density on Energy Absorption, Thin Walled Struct., Vol. 48, No. 7, pp. 482-294.
- J. Huh, J. H. Yoon, J. H. Lim, S. H. Park, H. Huh, 2008, Proc. Kor. Soc. Technol. Plast. Conf.(ed. J.S. Lee), Kor. Soc. Technol. Plast., Jeju, Korea, p. 259.
- M. G. Lee, H. Ryou, C. Kim, S. J. Kim, K. Chung, 2008, Parametric Study on Crashworthiness of Automotive Sheet Alloy, Metals Mater. Int., Vol. 14, No. 1, pp. 21-31. https://doi.org/10.3365/met.mat.2008.02.021