References
- T. Walde, H. Riedel, 2007, Simulation of Earing during Deep Drawing of Magnesium Alloy AZ31, Acta Mater., Vol. 55, No. 3, pp. 867-874. https://doi.org/10.1016/j.actamat.2006.09.007
- S. Yi, J. Bohlen, F. Heinemann, D. Letzig, 2010, Mechanical Anisotropy and Deep Drawing Behaviour of AZ31 and ZE10 Magnesium Alloy Sheets, Acta Mater., Vol. 58, No. 2, pp. 592-605. https://doi.org/10.1016/j.actamat.2009.09.038
- J. Levesque, K. Inal, K. W. Neale, R. K. Mishra, 2010, Numerical Modeling of Formability of Extruded Magnesium Alloy Tubes, Int. J. Plast., Vol. 26, No. 1, pp. 65-83. https://doi.org/10.1016/j.ijplas.2009.05.001
- M. Li, X. Y. Lou, J. H. Kim, R. H. Wagoner, 2010, An Efficient Constitutive Model for Roomtemperature, Low-rate Plasticity of Annealed Mg AZ31B Sheet, Int. J. Plast., Vol. 26, No. 6, pp. 820-858. https://doi.org/10.1016/j.ijplas.2009.11.001
- O. Cazacu, B. Plunkett, F. Barlat, 2006, Orthotropic yield Criterion for Hexagonal Closed Packed Metals, Int. J. Plast., Vol. 22, No. 7, pp. 1171-1194. https://doi.org/10.1016/j.ijplas.2005.06.001
- S. Erturk, D. Steglich, J. Bohlen, D. Letzig, W. Brocks, 2009, Thermo-mechanical Modelling of Indirect Extrusion Process for Magnesium Alloys, Int. J. Mater. Form., Vol. 2, No. 1, pp. 49-52. https://doi.org/10.1007/s12289-009-0436-6
- A. S. Khan, A. Pandey, T. Gnäupel-Herold, R. K. Mishra, 2011, Mechanical Response and Texture Evolution of AZ31 Alloy at Large Strains for Different Strain Rates and Temperatures, Int. J. Plast., Vol. 27, No. 5, pp. 688-706. https://doi.org/10.1016/j.ijplas.2010.08.009
- R. Hill, 1948, A Theory of Yielding and Plastic Flow of Anisotropic Metals, Proc. R. Soc. Lond. A, Vol. 193, No. 1033, pp. 281-297. https://doi.org/10.1098/rspa.1948.0045