References
- L. Qiu, S. Hein, E. Obermeier, and A. Schubert, "Micro gas-flow sensor with integrated heat sink and flow guide", Sens. Actuators A., vol. 54, no. 1, pp. 547-551, 1996. https://doi.org/10.1016/S0924-4247(97)80012-X
- T. Neda, K. Nakmura, and T. Takumi, " A polysilicon flow sensor for gas flow meters", Solid- State Sensors and Actuators and Eurosensors IX., pp. 548-551, Stockholm, Sweden, 1996.
- S. H. Kim, T. J. Nam, and S. K. Park", Measurement of flow direction and velocity using a micromachined flow sensor", Sens. Actuators A., vol. 114, no. 2-3, pp. 312-318, 2004. https://doi.org/10.1016/j.sna.2003.12.019
- S. C. Roh, Y. M. Choi, and S. Y. Kim, "Sensitivity enhancement of a silicon micro-machined thermal flow sensor", Sens. Actuators A., vol. 128, no. 1, pp. 1-6, 2006. https://doi.org/10.1016/j.sna.2005.05.007
- C. Sosna, R. Buchner, and W. Lang," A temperature compensation circuit for thermal flow sensor operated in constant-temperature-difference mode", IEEE Trans. Instrum. Meas., vol. 59, no. 6, pp. 1715- 1721, 2010. https://doi.org/10.1109/TIM.2009.2025988
- P. Bruschi, M Piotto, and G. Barillaro, "Effects of gas type on the sensitivity and transition pressure of integrated thermal flow sensors", Sens. Actuators A., vol. 132, no. 1, pp. 182-187, 2006. https://doi.org/10.1016/j.sna.2006.03.021
- Y. H. Wang, C. Y. Lee, and C. M. Chiang, "A MEMS-based air flow sensor with a free-standing micro-cantilever structure", Proc. of IEEE Conf. on Sensors., pp. 2389-2401, Sandiego, USA, 2007.
- Y. Su, A. G. R. Evans, A. Brunnschweiler, and G. Ensell, "Characterization of a highly sensitive ultrathin piezoresistive silicon cantilever probe and its application in gas flow velocity sensing", J. Micromech. Microeng., vol. 12, no. 6, pp. 780-785, 2002. https://doi.org/10.1088/0960-1317/12/6/309
- C. Y. Lee, C. Y. Wen, H. H. Hou, R. J. Yang, C. H. Tsai, and L. M. Fu, "Design and characterization of MEMS-based flow-rate and flow-direction microsensor", Microfluid Nanofluid., vol. 6, no. 3, pp. 363-371, 2009. https://doi.org/10.1007/s10404-008-0381-6
- Q. Zhang, W. Ruan, H. Wang, Y. Zhou, Z. Wang, and L. Liu, " A self-bended piezoresistive microcantilever flow sensor for low flow rate measurement", Sens. Actuators A., vol. 158, no. 2, pp. 273-279, 2010. https://doi.org/10.1016/j.sna.2010.02.002
- J. Chen, J. Engel, and C. Liu, "Development of polymer-based artificial haircell using surface micromachining and 3d assembly", Solid-State Sensors and Actuators and Microsystems., pp. 1035-1038, Warsaw, Poland, 2003.
- M. Dijkstra, J. J. van Baar, R. J. Wiegerink, T. S. J. Lammerink, J. H. de Boer, and G. J. M. Krijnen, "Artificial sensory hairs based on the flow sensitive receptor hairs of crickets", J. Micromech. Microeng., vol. 15, no. 7, pp. 132-138, 2005. https://doi.org/10.1088/0960-1317/15/7/019
- D. P. Martin, J. J. Grant, and J. V. Ringwood, "Evaluation of a prototype thermal anemometer for use in low Air-speed drying measure calculations" Flow Meas. Instrum., vol. 12, no. 5-6, pp. 285-396, 2002.
- O. C. Jeong and S. S. Yang, "Fabrication of a thermopneumatic microactuator with a corrugated p+ silicon diaphragm", Sens. Actuators A., vol. 80, no. 1, pp. 62-67, 2000. https://doi.org/10.1016/S0924-4247(99)00300-3
- J. H. Han, J. Y. Kim, T. S. Kim, and J. S. Kim, "Performance of Fabry-Perot microcavity structures with corrugated diaphragms", Sens. Actuators A., vol. 79, no. 2, pp. 162-172, 2000. https://doi.org/10.1016/S0924-4247(99)00267-8
- F. Ke, J. Miao, and Z. Wang, "A wafer-scale encapsulated RF MEMS switch with a stressreduced corrugated diaphragm", Sens. Actuators A., vol. 151, no. 2, pp. 237-243, 2009. https://doi.org/10.1016/j.sna.2009.02.031
- M. D. Giovanni, Flat and corrugated diaphragm design handbook, MARCEL DEKKER INC, New York, pp.249-258, 1982.
- P. R. Scheeper, W. Olthuis and P. Bergveld, "The design, fabrication, and testing of corrugated silicon nitride diaphragms", J. Microelectromech. Syst., vol. 3, no.1, pp. 36-42, 1994. https://doi.org/10.1109/84.285722
- http://www.efunda.com/designstandards/sensors/stra in_gages/strain_gage_sensitivity.cfm
Cited by
- A Flowmeter with a Corrugation Structure and 2-Directional Measurement Application vol.142, pp.1, 2013, https://doi.org/10.1080/10584587.2013.780575
- Fabrication and evaluation of a drag-force type dual flow sensor with an embedded temperature sensor 2017, https://doi.org/10.1007/s00542-017-3593-4
- Study on the Fabrication and Evaluation of the MEMS Based Curved Beam Air Flowmeter for the Vehicle Applications vol.25, pp.2, 2016, https://doi.org/10.5369/JSST.2016.25.2.116