DOI QR코드

DOI QR Code

Analysis of Visible Light Communication Module Degraded by High Dose-Rate Gamma Irradiation using Thermal Infrared Image

적외선 열영상을 이용한 가시광 통신모듈의 고선량 감마선조사에 따른 열화 분석

  • Received : 2011.03.17
  • Accepted : 2011.10.24
  • Published : 2011.12.01

Abstract

In this paper, the degradation evaluation method of VLC (Visible Light Communication) wireless module after high dose rate gamma-ray irradiation using the thermal infrared camera is proposed. First, the heating characteristics of the active devices embedded in the VLC wireless module during the condition of normal operation is monitored by thermal infrared camera. By the image processing technique, the trends of the intensity of the heat emitted by the active devices are calculated and stored. The feature of the blob area including the area of the active devices in the thermal infrared image is extracted and stored. The feature used in this paper is the mean value of the gray levels in the blob area. The same VLC module has been gamma irradiated at the dose rate of about 4.0 kGy/h during 72 hours up to a total dose of 288 kGy. And then, the heating characteristics of the active devices embedded in the VLC wireless module after high dose gamma ray irradiation is observed by thermal infrared camera. The high dose gamma-ray induced degradation of the active devices embedded in the VLC module was evaluated by comparing the mean value of the blob area to the one of the same blob area of the VLC module before the gamma ray irradiation.

Keywords

References

  1. IEEE Std. 323, "Standard for qualifying class 1E equipment for nuclear power generating stations," 2003.
  2. K. Korsah, R. Wetherington, R. Wood, L. F. Miller, K. Zhao, and A. Paul, "Emerging technologies in instrumentation and controls - An Update," NUREG/CR-6888, 2006.
  3. B. J. Kaldenbach, "Assessment of wireless technologies and their application at nuclear facilities," NUREG/CR-6882, 2006.
  4. Nuclear Emergency Response Headquarters, "Report of Japanese government to the IAEA ministerial conference on nuclear safety -The accident at TEPCO's fukushima nuclear power stations-," Government of Japan, Jun. 2011.
  5. Japan Machinery Federation, "Inspection report on nitride compound semiconductor materials for the preparation of the interface technology strategy map," (in Japanese), 2006.
  6. J. W. Cho, "VLC Data Transmission characteristics of high luminance LED irradiated by high dose-rate gamma-ray," 2009 IEEK Fall Conference (in Korean), pp. 190-191, 2009.
  7. J. E. Burns, "Design specification for NSSS integrity monitoring system for YGN 3&4 NPP," 10487-IC-DS-740, Rev.01, Combustion Engineering Inc., 1990.
  8. J. W. Cho, S. B. Hong, and I. S. Koo, "Analysis of high luminance LED beam degradation for visible light communication," NPIC&HMIT 2010, Las Vegas, Nevada, Nov. 2010.
  9. Weed Instrument, "N4000R-99 Series RTD Temperature Transmitter Nuclear Qualified," Product Data Sheet.
  10. Combustion Engineering, "Qualification of Class 1E Electrical Equipment," 1985.
  11. http://www.gengikyo.jp/report/tohokutaiheiyoujishin.html.