Structural Engineering and Mechanics

  • 제36권1호
  • /
  • Pages.19-36
  • /
  • 2010
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Estimation of load and resistance factors based on the fourth moment method

  • Lu, Zhao-Hui (School of Civil Engineering and Architecture, Central South University) ;
  • Zhao, Yan-Gang (Department of Architecture, Kanagawa University) ;
  • Ang, Alfredo H.S. (Department of Civil and Environmental Engineering, University of California)
  • 투고 : 2008.12.11
  • 심사 : 2010.04.07
  • 발행 : 2010.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

The load and resistance factors are generally obtained using the First Order Reliability Method (FORM), in which the design point should be determined and derivative-based iterations have to be used. In this paper, a simple method for estimating the load and resistance factors using the first four moments of the basic random variables is proposed and a simple formula for the target mean resistance is also proposed to avoid iteration computation. Unlike the currently used method, the load and resistance factors can be determined using the proposed method even when the probability density functions (PDFs) of the basic random variables are not available. Moreover, the proposed method does not need either the iterative computation of derivatives or any design points. Thus, the present method provides a more convenient and effective way to estimate the load and resistance factors in practical engineering. Numerical examples are presented to demonstrate the advantages of the proposed fourth moment method for determining the load and resistance factors.

키워드

참고문헌

  1. Ang, A.H.S. and Tang, W.H. (1984), Probability Concepts in Engineering Planning and Design, Vol II: Decision, Risk, and Reliability, J. Wiley & Sons, New York.
  2. AIJ (2002), Recommendations for Limit State Design of Buildings, Architectural Institute of Japan (AIJ), Tokyo. (in Japanese)
  3. Barranco-Cicilia, F., Castro-Prates de Lima, E. and Sudati-Sagrilo, L.V. (2009), "Structural reliability analysis of limit state functions with multiple design points using evolutionary strategies", Ingenieria Investigacion y Tecnologia, 10(2), 87-97.
  4. Der-Kiureghian, A. and Dakessian, T. (1998), "Multiple design points in first and second order reliability", Struct. Saf., 20(1), 37-49. https://doi.org/10.1016/S0167-4730(97)00026-X
  5. Fleishman, A.L. (1978), "A method for simulating non-normal distributions", Psychometrika, 43(4), 521-532. https://doi.org/10.1007/BF02293811
  6. Melchers, R.E. (1999), Structural Reliability Analysis and Prediction, 2nd edition, John Wiley & Sons, West Sussex, UK.
  7. Mori, Y. (2002), "Practical method for load and resistance factors for use in limit state design", J. Struct. Constr. Eng., AIJ, No. 559, 39-46. (in Japanese)
  8. Nowak, A.S. and Collins, K.R. (2000), Reliability of Structures, McGraw-Hill International Editions, Civil Engineering Series, Singapore.
  9. Schueller, G.I. (2009), "Efficient Monte Carlo simulation procedures in structural uncertainty and reliability analysis - recent advances", Struct. Eng. Mech., 32(1), 1-20. https://doi.org/10.1111/j.1460-2695.2008.01300.x
  10. Ugata, T. (2000), "Reliability analysis considering skewness of distribution-Simple evaluation of load and resistance factors", J. Struct. Constr. Eng., AIJ, No. 529, 43-50. (in Japanese)
  11. Zhao, Y.G., Lu, Z.H. and Ono, T. (2006), "A simple third-moment method for structural reliability", J. Asian Arch. Build. Eng., 5(1), 129-136. https://doi.org/10.3130/jaabe.5.129
  12. Zhao, Y.G. and Lu, Z.H. (2007a), "Fourth-moment standardization for structural reliability assessment", J. Struct. Eng-ASCE, 133(7), 916-924. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:7(916)
  13. Zhao, Y.G. and Lu, Z.H. (2007b), "Investigation on the applicable range of the fourth- moment method", J. Asian Arch. Build. Eng., 6(1), 151-158. https://doi.org/10.3130/jaabe.6.151
  14. Zhao, Y.G. and Lu, Z.H. (2008), "Cubic normal distribution and its significance in structural reliability", Struct. Eng. Mech., 28(3), 263-280. https://doi.org/10.12989/sem.2008.28.3.263

피인용 문헌

  1. A Modification to HL-RF Method for Computation of Structural Reliability Index in Problems with Skew-distributed Variables 2018, https://doi.org/10.1007/s12205-017-1473-1
  2. Structural reliability analysis using a hybrid HDMR-ANN method vol.24, pp.11, 2017, https://doi.org/10.1007/s11771-017-3666-7
  3. Complete monotonic expression of the fourth-moment normal transformation for structural reliability vol.196, 2018, https://doi.org/10.1016/j.compstruc.2017.11.006
  4. An adaptive directional importance sampling method for structural reliability analysis vol.70, 2018, https://doi.org/10.1016/j.strusafe.2017.07.006
  5. An efficient reliability algorithm for locating design point using the combination of importance sampling concepts and response surface method vol.47, 2017, https://doi.org/10.1016/j.cnsns.2016.11.021
  6. Probabilistic sensitivity analysis for the frame structure of missiles pp.2041-2983, 2018, https://doi.org/10.1177/0954406218805520
  7. A new adaptive importance sampling Monte Carlo method for structural reliability vol.17, pp.1, 2010, https://doi.org/10.1007/s12205-013-1779-6
  8. Reliability Analysis of Seismic Slope Stability with Uncertain Probability Distributions vol.21, pp.6, 2021, https://doi.org/10.1061/(asce)gm.1943-5622.0002010