Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Mixed-Mode Fatigue Characteristics of Composite/Metal Interfaces

복합재료/금속 계면의 혼합모드 피로 특성

  • 백상호 (현대자동차 플랫폼개발2팀) ;
  • 김원석 (한국항공우주연구원 위성구조팀) ;
  • 장창재 (한국과학기술원 기계공학과 대학원) ;
  • 이정주 (한국과학기술원 기계공학과)
  • Published : 2010.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In most engineering structures, fracture often takes place due to fatigue. Therefore, many studies about the effect of the various mode-mixities on fatigue characteristics have been performed. However, most of the former studies only address metal/metal interfaces or delamination of composite. In this study, the fatigue characteristics of composite/metal interfaces are investigated. The fatigue tests were performed using single leg bending(SLB)specimens that comprise composite and steel bonded to each other using co-cure bonding method. This paper focuses on fatigue characteristics depending on different mode ratios$(G_{II}/G_T$. The overall results obtained in this study show that the crack propagation rate increases with the mode II loading component.

대부분의 구조물 파괴는 피로에 의해서 발생한다. 따라서 지금까지 모드 혼합비가 피로 특성에 어떤 영향을 미치는지에 대한 수많은 연구가 수행되어 오고 있다. 하지만 대부분의 연구가 금속/금속 계면이나 복합재료 층간 분리에 관한 연구이다. 따라서 본 연구에서는 이종재료인 복합재료/금속 계면의 피로 특성에 대한 기초 자료를 얻고자 하였다. 이를 위하여 복합재료와 탄소강을 동시 경화법을 이용하여 접합한 SLB(single leg bending) 시편을 이용하여 피로 실험을 수행하였다. 특히, 피로 특성에 모드 혼합비$(G_{II}/G_T)$가 어떠한 영향을 미치는지에 대해 알아보고자 하였다. 전체적으로 모드 II 하중 성분 이 많을수록 균열진전속도가 빨라진다는 결과를 얻었다.

Keywords

References

  1. Dai Gil Lee, Nam Pyo Suh, "Axiomatic Design and Fabrication of Composite Structures, Applications in Robots, Machine Tools and Automobiles," Oxford.
  2. 김형원, "PSF/AS4 복합재료의 가속노화가 피로강도에 미치는 영향," 한국복합재료학회지, 제19권 제4호, 2006, pp. 1-6.
  3. 이상협, 최영근, 김상태, "SiC 강화 알루미늄기 복합재료의 표면미소 피로균열 발생 및 진전 거동," 한국복합재료학회지, 제22권 제3호, 2009, pp. 74-81.
  4. M. Dessureault and J.K. Spelt, "Observations of fatigue crack initiation and propagation in an epoxy adhesive," Int. J. Adhesion and Adhesive, Vol. 17, 1997, pp. 183-195. https://doi.org/10.1016/S0143-7496(96)00044-9
  5. X.X. Xu, A.D. Crocomb and P.A. Smith, "Mixed-mode fatigue and fracture behavior of joints bonded with either filled or filled and toughened adhesive," Int. J. Fatigue, Vol. 17, No. 4, 1995, pp. 279-286. https://doi.org/10.1016/0142-1123(95)93540-I
  6. ZHEHUA ZHANG and J.K. SHANG, "Subcritical Crack Growth at Bimaterial Interfaces: Part III. Shear-Enhanced Fatigue Crack Growth Resistance at Polymer/Metal Interface," METALLURGICAL AND MATERIALS TRANSACTIONS A, vol. 27A, 1996, pp. 221-228.
  7. M. Kenane and M.L. Benzeggagh, "Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading," Composites Science and Technology, Vol. 57, 1997, pp. 597-605. https://doi.org/10.1016/S0266-3538(97)00021-3
  8. Charalambides P.G, Lund J, Evans A.G, and McMeeking R.M, "A test specimen for determining the fracture resistance of biomaterial interfaces," J Appl Mech. Vol. 56, No. 1, 1989, pp. 77-82. https://doi.org/10.1115/1.3176069
  9. J.S. Wang and Z. Suo, "Experimental determination of interfacial toughness curves using Brazil-nut-sandwiches," Acta metall mater. Vol. 38, No. 7, 1990, pp. 1279-1290. https://doi.org/10.1016/0956-7151(90)90200-Z
  10. G. Fernlund and J. K. Spelt, "Mixed-mode fracture characterization of adhesive joints," Composites Sci Technol., Vol. 50, 1994, pp. 441-449. https://doi.org/10.1016/0266-3538(94)90052-3
  11. S.H. Yoon and C.S. Hong, "Modified end notched flexure specimen for mixed mode interlaminar fracture in laminated composites," Int J Fract. Vol. 43, 1990, pp. R3-R9. https://doi.org/10.1007/BF00018129
  12. B.D. Davidson and V. Sundararaman, "A single leg bending test for interfacial fracture toughness determination," Int J Fract. Vol. 78, 1996, pp. 193-210 https://doi.org/10.1007/BF00034525
  13. "Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites," ASTM STP D 6115.
  14. "Standard Test Method for Measurement of Fatigue Crack Growth Rates," ASTM STP E 647.

Cited by

  1. Experiment and Analysis on Impact of Tapered Double Cantilever Beam with Aluminum Alloy vol.27, pp.2, 2014, https://doi.org/10.7234/composres.2014.27.2.072
  2. Study of the Shape of Car Body Affecting Flow Resistance of Air Flowing Near Car vol.15, pp.8, 2014, https://doi.org/10.5762/KAIS.2014.15.8.4707