Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Magnetic Polishing Using Ba-Ferrite Magnetic Substance

Ba-Ferrite 자성체를 사용한 자기연마 가공

  • Received : 2010.04.01
  • Accepted : 2010.05.12
  • Published : 2010.08.15
Download PDF
⟨ Previous Next ⟩

Abstract

The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has an aim for clean technology in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. This paper deals with mediocritizing magnetic polishing device into regular lathe and this experiment was conducted in order to get the best surface roughness at low cost. This paper contains the result of experiment to acquire the best surface roughness, not using the high-cost polishing material in processing. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

Keywords

References

  1. Shinmura, T. and Aizawa, T., 1987, "Study on Internal Finishing of a Non-ferromagnetic Tubing by Magnetic Abrasive Machining Proeess," Journal of JSPE, Vol. 54, No.4, pp. 767-773.
  2. Shinmura, T. and Yamaguchi, H., 1993, "Study on a New Internal Finishing Process by Applying Magnetic Abrasive Machining," Journal of JSME, Vol. 59, No. 560, pp. 293-299.
  3. Shinmura, T., Hamato, Y., and Yamaguchi, H., 1998, "A New Precision Deburring Process for Inside Tubes by the Application of Magnetic Abrasive Machining," Journal of JSME, Vol. 64, No. 620, pp. 312-318.
  4. Anzai, M., Sudo, T., and Nakagawa, T., 1991, "Development of Magnetic Abrasive and It's Finishing Characteristics," J. SEISAN KENKYU, Vol. 43, No. 11, pp. 13-22.
  5. Anzai, M. and Nakagawa, T., 1993, "Improve the Efficient of Magnetic Finishing," J. SEISAN KENKYU, Vol. 45, No. 12, pp. 816-820.
  6. Kim, H. N., Yun, Y. K., and Shim, J. W., 2002, "Super Precise Finishing of Internal-face in STS304 pipe Using The Magnetic Abrasive Polishing," Journal of the Korean Institute of Industrial Safety, Vol. 17, No.3. pp. 30-35.
  7. Kim, H. N., Yun, Y. K., Kim, S. B., Choi, H. S., and Ahn, H. J., 2004, "Development of The Magnetic Abrasive Using Sludge," Journal of the Korean Society of Safety, Vol. 19, No.2, pp. 6-10.
  8. Kim, H. N., Yun, Y. K., Kim, S. B., and Choi, H. S., 2004, "Magnetic Abrasive Polishing for Internal Face of Seamless Stainless Steel Tube Using Sludge Abrasive Grain," Transactions of KSAE, Vol. 12, No. 6, pp. 151-157.
  9. Kim, H. N. and Yun, Y. K., 2008, "Development of The Magnetic Abrasive Using Ba-Ferrite and GC, CBN," Journal of the Korean Society of Safety, Vol. 23, No.5, pp. 43-48.