DOI QR코드

DOI QR Code

A Study on the Development of the Seeder for Soybean and Corn

콩.옥수수 육묘용 파종기 개발에 관한 연구

  • Received : 2010.07.27
  • Accepted : 2010.09.11
  • Published : 2010.10.25

Abstract

Soybean (Glycine max Merr.) and corn (Zea mays L.) transplanting has increased because soybean and corn crops cultivated by the direct seeding method were often damaged by wild birds. The purpose of this study is to develop a seeder to sow soybean (Glycine max Merr.) and corn (Zea mays L.) in a plug tray. In order to find out design factors for a metering device of the seeder, metering characteristics on metering hole size and roller speed were experimentally investigated. Soybean (cv. 'Daewon') and corn (cv. 'Mibaekchal') were used as a materials for testing the seeder in this experiment. The metering hole size of roller suitable for Daewonkong and Mibaekchal was determined. Daewonkong was suitable for hole diameter of 10 mm and hole depth of 5.5 mm, and Mibaekcal was suitable for hole diameter of 9 mm and hole depth of 5.5 mm. At a brush length of 4 mm, one grain seeding rates of Daewonkong and Mibaekchal was 99% and 93% respectively. By inducing Mibaekchal to the hole by swing, one grain seeding rate of that increased from 91.9% to 97.7%. When roller speed is 4 m per minut, seeding efficiency of prototype was 110 sheets per hour.

Keywords

References

  1. Kang, D. S, E. S. Kim, D. H. Kim, G. M. Shon and G. W. Song. 2004. Study on adaptable Cropping System for Soybeanusing the ridge and furrow of maize. Gyeongnam-do Agricultural Research and Extension Services Report pp. 157-168. (In Korean)
  2. Kim, S. K, E. S. Kim and D. H. Kim. 2001. Test of damage reduction by birds during emergence in direct seeding of corns and beans. Gyeongsangnam-do Agricultural Research & Extension Services Report pp. 68-78. (In Korean)
  3. Choi, Y. S., S. N. Yoo and G. B. Koo. 1999. Development of rice-pellet seeder(Ⅰ), Design of seed metering device. Proceedings of the KASM 1999 Summer Conference 4(2):65-70. (In Korean)
  4. Ministry of Food, Agriculture, Forestry and Fisheries(MIFAFF). 2008. Anual report of the statistics of food, agriculture, forestry and fisheries. (In Korean)
  5. Park, S. H., J. Y. Kim, D. K. Choi, C. K. Kim, T. Y. Kwak and S. C. Cho. 2005. Development of walking type chinese cabbage transplanter. J. of Biosystems Eng. 30(2):81-88. (In Korean) https://doi.org/10.5307/JBE.2005.30.2.081
  6. Rhee, J. Y, J. S. Hwang, C. J. Chung and H. J. Kim. 2000. Morphological analysis of seed for seeder design. Proceedings of the KASM 2000 Winter Conference 5(1):101-106. (In Korean)
  7. Ryu, I. H and K. U. Kim. 1997. Design of roller-type metering device for precision planting. Journal of the KASM 22(4):401-410. (In Korean)
  8. So, S. Y., D. C. Cho and C. J. YU. 2005. Analysis of Management Conditions of Waxy Corn in Chonbuk Region. Institute of Agricultural Science & Technology Chonbuk National University. 36(1): 154-164. (In Korean)
  9. Son, C. K and Y. S. Yun. 2003. Test of damage reduction of corn damage by bird. Gyeongsangbuk-do Agricultural Research & Extension Services Report pp. 110-115. (In Korean)
  10. Yoo, S. N, Y. S. Choi and S. R. Suh. 2005. Development of a precision metering device for direct seeding of rice. Journal of the Biosystems Eng. 30(5):261-267. (In Korean) https://doi.org/10.5307/JBE.2005.30.5.261