한국수소및신에너지학회논문집 (Journal of Hydrogen and New Energy)

  • 제21권3호
  • /
  • Pages.201-206
  • /
  • 2010
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지

열 플라스마 용사법에 의해 코팅된 SOFC 용 세라믹 연결재인 $La_{0.8}Ca_{0.2}CrO_3$ 특성 연구

Characterization and Preparation of $La_{0.8}Ca_{0.2}CrO_3$ Ceramic Interconnect Prepared by Thermal Plasma Spray Coating Process for SOFC

  • 박광연 (한국에너지기술연구원 연료전지연구단) ;
  • 임탁형 (한국에너지기술연구원 연료전지연구단) ;
  • 이승복 (한국에너지기술연구원 연료전지연구단) ;
  • 박석주 (한국에너지기술연구원 연료전지연구단) ;
  • 송락현 (한국에너지기술연구원 연료전지연구단) ;
  • 신동렬 (한국에너지기술연구원 연료전지연구단)
  • Park, Kwang-Yeon (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Lim, Tak-Hyoung (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Lee, Seung-Bok (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Park, Seok-Joo (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Song, Rak-Hyun (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Shin, Dong-Ryul (Fuel Cell Research Center, Korea Institute of Energy Research)
  • 투고 : 2010.03.03
  • 심사 : 2010.06.25
  • 발행 : 2010.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In present work, $La_{0.8}Ca_{0.2}CrO_3$ (LCC) ceramic interconnect layer for SOFC was prepared by using thermal plasma spray coating process. The LCC powders were synthesized by Pechini method and calcined at the temperature of $1000^{\circ}C$. The prepared LCC powder was characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), particle counter, BET analysis, respectively. In addition, basic and essential properties of LCC layer coated by thermal plasma spray coating process such as the morphology of surface and cross section for coated layer, gas leak rate, and electrical conductivity were analyzed and discussed. Based on these experimental results, it can be concluded that the LCC layer coated by thermal plasma spray coating process can be suitable as a ceramic interconnect of SOFC operated at $800^{\circ}C$.

키워드

참고문헌

  1. W. Vielstich, H. A. Gasteiger and A Lamm, "Handbook of Fuel Cells-Fundamentals, Technology and Applications", Vol. 1, John Wiley & Sons, Chichester, 2003, p. 121.
  2. Ryan P. O'Hayre, Suk-won Cha, Whitney Colella, Fritz B. Prinz, "Fuel Cell Fundamentals", Willy & Sons, New York, 2006, p. 11.
  3. J. Larminie and A. Dicks, "Fuel Cell Systems Explained", 2nd ed., John Wiley & Sons, Chichester, 2003, pp. 23-26.
  4. N. Q. Minh and T. Takahashi, "Science and Technology of Ceramic Fuel Cell", Elsevier Science, Netherlands, 1995.
  5. 이길용, 백동현, 송락현, "고체산화물 연료전지용 (Ca,Sr)도핑된 $LaCrO_3$계 세라믹 연결재코팅층의 특성 연구", Vol. 8, No. 4, 한국전기학회, 2005, pp. 162-167.
  6. R. Suryanarayanan(ed), "Plasma Spraying", World Scientific, Singapor, 1993.
  7. Jong-Hee Kim, Rak-Hyun Song, Keun-Suk Song, Sang-Hoon Hyun, Dong-Ryul Shin and Harumi Yokokawa, "Fabrication and characteristics of anode-supported flat-tube solid oxide fuel cell", Vol. 122, J. Power Sources, 2003, pp. 7-13.
  8. 손희정, 임탁형, 이승복, 신동열, 송락현, 김 성현, "진공 슬러리 담금 코팅 공정에 의한 고체산화물연료전지용 박막 전해질 제조에 관한 연구", 한국 수소 및 신에너지 학회 논문집, Vol. 17, 2006, pp. 204-211.
  9. G. Y. Lee, J. H. Kim, R. H. Song, Y. G. Shul, D. H. Peck, T. H. Lim, D. R. Shin, "Properties of Cu, Ni, V doped $LaCrO_3$ interconnect materials for SOFC", Vol. 17, J. Electroceramics, 2007, pp. 723-727.