Abstract
The development of energy saving system with pressure regulator has recently been received interests. Since the internal geometry in the pressure regulator is small and complex, the frictional loss in it is critical. In this study, the pressure loss with tip size, tip position, and mass flow was investigated using numerical approaches(CFD). The aimed reduction in pressure were achieved as the ratio of t/T was more than 0.8. In addition, there was no effect of the tip position.
최근에 공압 제어 시스템에서 정압기를 장착하여 에너지를 절감하는 연구가 진행되고 있다. 정압기는 내부적으로 매우 복잡하기 때문에 유체력 손실에 영향을 끼친다. 따라서 정압기 설계 시, 유체역학적 접근을 통한 설계 변수의 도출은 매우 중요하다. 본 연구에서는 상용 CFD 패키지인 FLUENT를 사용하여 정압기 내에서 팁의 크기, 팁의 위치, 그리고 유량이 유체력 손실에 끼치는 영향을 살펴보았다. t/T 비가 0.8이상일 때, 유체력 손실을 증가시키지 않으면서 목표 감압을 이룰 수 있었고, 위치의 영향은 크지 않음을 알 수 있었다.