Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Development of Measuring System for Extra Long Roller Using Non-contact Sensor

비접촉식 센서를 이용한 초장축 롤러 측정 장치 개발에 관한 연구

  • Kim, Woong (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.) ;
  • Lee, Choon-Man (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.) ;
  • Lee, Mun-Jae (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.) ;
  • Park, Sung-Jin (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.)
  • 김웅 (창원대학교 기계설계공학과) ;
  • 이춘만 (창원대학교 기계설계공학과) ;
  • 이문재 (창원대학교 기계설계공학과) ;
  • 박성진 (창원대학교 기계설계공학과)
  • Received : 2010.02.16
  • Accepted : 2010.03.04
  • Published : 2010.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Manufacturing accuracy of a precision instrument was essential to stability and efficiency of the product. Accordingly, geometrically accuracy management of precision instrument was very becoming the technique in order to design and manufacturing for machine. In this study, Measuring System is developed for extra long roller using non-contact sensor. Futhermore, It's studied by Geometric Tolerance. Exact roundness is obtained to Least Squares method from the reference circle of measured data. Measuring System is analyzed point of measurement and straightness of extra long roller is evaluated by FEM.

Keywords

References

  1. Park, C. H., Chung, J. H., Kim, S. T. and Lee, H. S., "Development of Submicron Order Straightness Measuring Device," Journal of KSPE, Vol. 17, No. 5, pp. 124-130, 2000.
  2. Kwac, L. K., Han, J. H., Kim, H. G., Kim, J. Y. and Kim, H. C., "The development of automation system for LC diameter and roundness measurement," Proc. of KSMTE Autumn Conference, pp. 3-9, 2006.
  3. Han, E. G., Rho, B. O. and Her, M. S., "An Analysis of Performance Error of High Precision Measuring Instrument," Transaction of KSME, Vol. 13, No. 5, pp. 862-874, 1989.
  4. Lee, S. S., Kim, M. J. and Jeon, E. C., "A Study on the Improvement of Circularity Measurement Using Circular Test Method," Transaction of the KSMTE, Vol. 11, No. 2, pp. 24-29, 2002.
  5. Park, H. J., Yae, I. J. and Park, J. S., "Development of Straightness Measurement Technique Using the Profile Matching," Transaction of KSME, Vol. 19, No. 12, pp. 3113-3120, 1995.
  6. Kim, W., Lee, C. M., Park, S. J. and Bae, S. W., "Development of Geometric Tolerance Measuring System for Extra Long Pipe Using Non-contact Sensor," Proc. of KSMTE Spring Conference, pp. 409-413, 2009.
  7. Lee, E. S., Kim, J. G. and Shin, Y. G., "A Study on the Minimum Zone Algorithm for the Calculation of Roundness," Journal of KSPE, Vol. 17, No. 7, pp. 156-161, 2000.