Abstract
The purpose of this study was to research about Dobby weave design using Computer-Aided Weaving System. For performing this design study, first, it was researched the characteristics of the classified woven fabrics, weaving processing, structure of Dobby loom, and Computer-Aided Dobby Weaving system theoretically. To develop Dobby woven design, Patternland Weave Simulator(U.S.A) for computer weave system was used. Among the developed Dobby woven designs by computer weaving system, mainly three of them were selected and woven into Dobby loom. To see the visual image of the fabric end-use, some of the scanned Dobby fabrics were simulated to the three-dimensional virtual images by Alias CAD system. The result of this study can be summarized as follows. Before the step of weaving Dobby fabrics on the woven design works, Computer-Aided Weaving system can be done very easily to apply the design step of Dobby woven fabrics, specially in case of the complicated woven structure. Also the usage of the simulation CAD system in visual image of the final products, ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.