Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

The Friction Characteristics of Roll Stand in the Cooling Slat Fin M/C

쿨링용 슬레트 핀 M/C Form Roll의 Roll Stand부 마찰 특성

  • Choi, Won-Sik (Dept. of Bio Industrial Mechanical Engineering, Pusan National University) ;
  • Lee, Sung-Yong (DST.CO.,LTD) ;
  • Kwon, Ju-Ry (BIMMS Lab, Dept. of Bio Industrial Mechanical Engineering, Pusan National University) ;
  • Jin, Eun-Young (BIMMS Lab, Dept. of Bio Industrial Mechanical Engineering, Pusan National University) ;
  • Mun, Hee-Joon (BIMMS Lab, Dept. of Bio Industrial Mechanical Engineering, Pusan National University) ;
  • Lee, In (BIMMS Lab, Dept. of Bio Industrial Mechanical Engineering, Pusan National University)
  • 최원식 (부산대학교 바이오산업기계공학과) ;
  • 이성용 ((주)DST 연구소) ;
  • 권주리 (부산대학교 바이오산업기계공학과, BIMMS Lab.) ;
  • 진은영 (부산대학교 바이오산업기계공학과, BIMMS Lab.) ;
  • 문희준 (부산대학교 바이오산업기계공학과, BIMMS Lab.) ;
  • 이인 (부산대학교 바이오산업기계공학과, BIMMS Lab.)
  • Received : 2009.10.28
  • Accepted : 2009.12.04
  • Published : 2010.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

This study investigates the friction of the roll stands in the high performance multi- holes slate fin machine which pin is using in heat transfer of radiator, oil cooler, inter cooler, condenser and evaporator. The roll stand part is very important to maintain the high performance fin machine. This multi-holes form roll type is the first time in our country so it will be helpful to increases the export and product of heat transfer. It was include the technical of form rolling system which was self development. Then it will be improve the electric home appliances, future motor vehicle device and industrial machine.

Keywords

References

  1. Wonsik Choi and SamYeon Lee, "The Development of High Speed Corrugation Machine for PFC Fin," Proceedings of the KSME Spring Meeting, pp.47-51, 2006.
  2. A. Bejan., "Convection Heat Teat Transfer Second edition," John Wiley & Sons, Inc., 1995.
  3. Elenbass, W., "Heat Distribution of Parallel Plate by Free Convection," Physica, Vol. 9, No.1, pp.665-671, 1942. https://doi.org/10.1016/S0031-8914(42)80033-6
  4. K. E. Starner and H. N. Mcmaus. JR., "AnExperimental Investigation of Free-Convection Heat Transfer from Rectangular Fin Arrays," J. Heat Transfer, pp. 273-278, 1963.
  5. G, Ledezma and A. Bejan, "Heat Skins with Sloped Plate Fin in Natual and Forced Convection," Int. J. Heat Mass Transfer, Vol. 39, No. 9, pp. 1773-1783, 1996. https://doi.org/10.1016/0017-9310(95)00297-9
  6. W. S. Choi, S. Y, Lee, H. J. Mun and I. Lee., "The Development of High Efficiency Multi-Holes Slat Fin Machine," Proceedings of the KSIA Spring Meeting, 2008.
  7. Kapelski, G., Platon, F. and Boch, P., "Unlubricated Wear and Friction Behaviour of Alumina and Silicon Carbide Ceramics," Proc. 15th Leeds-Lyon Symposium on Triblolgy, pp. 349-354, 1988.
  8. Jang, Sun-Tae and Lee, Young Z., "Friction and Wear Behavior of Ceramics Under Various Sliding Environments," J. of the KSTLE, Vol. 11, No. 3, pp. 11-23, 1995.