초록
본 연구에서는 프탈레이트 화합물 측정 시 시료채취 및 분석과정 증에서 야기될 수 있는 공시료의 오염여부를 평가하고 clean-up 절차와 같은 적절한 개선 방안을 제시하였다. 실험도구 및 시료채취 매체에 대한 공시료를 평가한 결과 많은 종류의 실험기구 및 장치에서 DBP와 DEHP가 잔존하는 것으로 나타났다. 따라서 실험도구는 반드시 전처리하여 사용해야 하며, 이후 공시료 보정이 수반되어야 한다. 또한 본 연구에서 제시한 clean-up 방법을 통해 불순물이 많이 제거되었으며, GC/MS를 이용한 정성?정량분석에서 정도개선에 효과적인 것으로 나타났다.
This study was carried out to find out any inherent problems occurring in the sampling and analytical procedures, and to suggest the relevant solutions to the problems. In addition, an optimal condition of clean-up process was developed, which was based on a method using silica glass column. As a result of experiments to test any artificial contamination of blank samples such as glassware and collection media, artifacts of DBP and DEHP appeared to be detected in various kinds of laboratory tools and apparatuses used in the sampling and analytical works. Therefore, it is necessary to investigate a degree of contamination before laboratory works by conducting a prior check any possible contaminations in all experimental tools and apparatus. It is also necessary to devise a method to avoid a tool, if possible, or to use a substitute of phthalate free. If the use of any plastic tool to cause contamination is inevitable, it should be properly corrected with a blank level, as is equally treated as the sample. The clean-up process demonstrated in this study can give us a significant benefit in terms of the quantity and quality of a target compound by GC/MS analysis.
