DOI QR코드

DOI QR Code

Ultrafiltration of oil-in-water emulsion: Analysis of fouling mechanism

  • Chakrabarty, B. (Department of Chemical Engineering, Indian Institute of Technology Guwahati) ;
  • Ghoshal, A.K. (Department of Chemical Engineering, Indian Institute of Technology Guwahati) ;
  • Purkait, M.K. (Department of Chemical Engineering, Indian Institute of Technology Guwahati)
  • 투고 : 2010.01.14
  • 심사 : 2010.07.05
  • 발행 : 2010.10.25

초록

Membrane fouling is one of the major operational concerns of membrane processes which results in loss of productivity. This paper investigates the ultrafiltration (UF) results of synthetic oil-in-water (o/w) emulsion using flat sheets of polysulfone (PSf) membrane synthesized with four different compositions. The aim is to identify the mechanisms responsible for the observed permeate flux reduction with time for different PSf membranes. The experiments were carried out at four transmembrane pressures i.e., 68.9 kPa, 103.4 kPa, 137.9 kPa and 172.4 kPa. Three initial oil concentrations i.e., 75 $mgL^{-1}$, 100 $mgL^{-1}$ and 200 $mgL^{-1}$ were considered. The resistance-in-series (RIS) model was applied to interpret the data and on that basis, the individual resistances were evaluated. The significances of these resistances were studied in relation to parameters, namely, transmembrane pressure and initial oil concentration. The total resistance to permeate flow is found to increase with increase in both transmembrane pressure and initial oil concentration while for higher oil concentration, resistance due to concentration polarization is found to be the prevailing resistance. The applicability of the constant pressure filtration models to the experimental data was also tested to explain the blocking process. The study shows that intermediate pore blocking is the dominant mechanism at the initial period of UF while in the later period, the fouling process is found to approach cake filtration like mechanism. However, the duration of pore blocking mechanism is different for different membranes depending on their morphological and permeation properties.

키워드

피인용 문헌

  1. Oil Removal from Produced Water by Ultrafiltration using Polysulfone Membrane vol.34, pp.2, 2017, https://doi.org/10.1590/0104-6632.20170342s20150500
  2. Advances in the Synthesis and Application of Anti-Fouling Membranes Using Two-Dimensional Nanomaterials vol.11, pp.8, 2021, https://doi.org/10.3390/membranes11080605