Journal of Advanced Marine Engineering and Technology

  • 제34권1호
  • /
  • Pages.53-61
  • /
  • 2010
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

Numerical Study Of H2O-Cu Nanofluid Using Lattice-Boltzmann Method

  • Taher, M.A. (Department of Mathematics Dhaka Univerity of Engg.& Technology) ;
  • Li, Kui-Ming (Graduate School of Mechanical Engineering, Pukyong National University) ;
  • Lee, Yeon-Won (School of Mechanical Engineering, Pukyong National University)
  • 발행 : 2010.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the present study, a laminar natural convection flow of $H_2O$-Cu nanofluid in a two dimensional enclosure has been investigated using a thermal lattice Boltzmann approach with the Bhatnagar-Gross-Krook (BGK) model. The effect of suspended nanoparticles on the fluid flow and heat transfer process have been studied for different controlling parameters such as particle volume fraction ($\Phi$), Rayleigh number (Ra). For this investigation the Rayleigh number changes from 104 to 106 and volume fraction varied from 0 to 10% with three different particle diameters (dp), say 10 nm, 20 nm and 40 nm. It is shown that increasing the Rayleigh number (Ra) and the volume fraction of nanofluid causes an increase of the effective heat transfer rate in terms of average Nusselt number (Nu) as well as the thermal conductivity of nanofluid. On the other hand, increasing the particle diameter causes the decrease of the heat transfer rate and thermal conductivity. The result of the analysis are compared with experimental and numerical data both for pure and nanofluids and it is seen a relatively good agreement.

키워드

참고문헌

  1. S. Lee, S. U. S. Choi, S. Li and J. A. Eastman, "Measuring thermal conductivity of fluids containing oxide nanoparticles", Transactions of the ASME, vol. 121, pp. 280-289, 1999.
  2. Y. Xuan and Q. Li, "Heat transfer enhancement of nanofluids", Int. J. Heat and Fluid Flow, vol. 21, pp. 58-64, 2000. https://doi.org/10.1016/S0142-727X(99)00067-3
  3. S. Saravanan, A. K. Abdul Hakeem, P. Kandaswamy and J. Lee, "Buoyancy convection in a cavity with mutually orthogonal heated plates", vol.55, pp. 2903-2912, 2008. https://doi.org/10.1016/j.camwa.2007.11.024
  4. R. J. Krane and J. Jessee, "Some detailed field measurement for a natural convection flow in a vertical square enclosure", Proceedings of the first ASME-JSME thermal engineering joint conference, vol. 1, pp. 323-329, 1983.
  5. C. H. Cheng and C. L. Chen, "Buoyancy-induced periodic flow and heat transfer in lid-driven cavities with different cross-sectional shapes", vol. 32, pp.483-490, 2005. https://doi.org/10.1016/j.icheatmasstransfer.2004.10.001
  6. K. Khanafer, K. Vafai and M. Lightstone, "Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids", Int. J. Heat and Mass transfer, vol. 46, pp. 3639-3653, 2003. https://doi.org/10.1016/S0017-9310(03)00156-X
  7. S. K. Das, S. U .S. Choi, W. Yu and T. Pradeep, Nanofluids, Science and Technology, Wiley Interscience, 2007.
  8. X. Shan, and H. Chen, "Lattice Boltzmann model for simulating flows with multiple phases and components", Physical Review E, vol. 47, no. 3, pp. 1815-1820, 1993. https://doi.org/10.1103/PhysRevE.47.1815
  9. N. S. Martys and H. Chen, "Simulation of multicomponent fluids in complex three-dimensional geometries by the lattice Boltzmann method", Physical Review E, vol. 53, no. 1, pp. 743-750, 1996. https://doi.org/10.1103/PhysRevE.53.743
  10. X. Shan, "Simulation of Rayleigh - Bernard convection using Lattice Boltzmann method", Physical Review E, vol. 55, no.3, pp. 2780-2788, 1997. https://doi.org/10.1103/PhysRevE.55.2780
  11. J. M. Buick and C. A. Greated, "Gravity in lattice Boltzmann model", Physical Review E, vol. 61, No.5, pp.5307-5320, 2000. https://doi.org/10.1103/PhysRevE.61.5307
  12. Y. Xuan and Z. Yao, "Lattice Boltzmann model for nanofluids", Heat Mass Transfer, vol. 41, pp. 199-205, 2005.
  13. Y. Xuan, K. Yu and Q. Li, "Investigations of flow and heat transfer of nanofluids by the thermal lattice-Boltzmann model", Prog. Computational fluid Dynamics, vol. 5, no. 1/2, pp. 13-19, 2005. https://doi.org/10.1504/PCFD.2005.005813
  14. W. H. Leong, K. G. T. Hollands and A. Brunger, "Experimental Nusselt numbers for a cubical-cavity benchmark problem in natural convection", Int. J. Heat Mass Transfer, vol. 42, pp. 1979-1989, 1998. https://doi.org/10.1016/S0017-9310(98)00299-3
  15. D. Wen and Y. Ding, "Natural convective heat transfer of suspensions of titanium dioxide nanoparticles (nanofluids), IEEE Transactions on nanotechnology, vol. 5, no. 3, pp. 220-227, 2006 https://doi.org/10.1109/TNANO.2006.874045

피인용 문헌

  1. O-Cu Nanofluid using LBM vol.34, pp.7, 2010, https://doi.org/10.5916/jkosme.2010.34.7.981
  2. Heat Transfer Enhancement of Cu-H<sub>2</sub>O Nanofluid with Internal Heat Generation Using LBM vol.03, pp.02, 2013, https://doi.org/10.4236/ojfd.2013.32A015