References
- Ushijima, T. and Kumakawa, S., 1993, “Active Engine Mount with Piezo-actuator for Vibration Control,” Progress in Technology of Society of Automotive Engineers, pp. 291-298.
- Mueller, M., Eckel, H.-G., Leibach, M. and Bors, W., 1993, “Reduction of Noise and Vibration in Vehicles by an Appropriate Engine Mount System and Active Absorbers,” SAE Transactions, pp. 146-157.
- Swanson, D. A., 1998, “Active Engine Mounts for Vehicles,” Progress in Technology of the SAE, pp. 281-290.
- Matsuoka, H., Mikasa, T. and Nemoto, H., 2004, “NV Countermeasure Technology for a Cylinder-On-Demand Engine - Development of Active Control Engine Mount,” Noise and vibration of SAE International, pp. 149-154.
- Lee, B. H. and Lee, C. W., 2009, “Model Based Feed-forward Control of Electromagnetic Type Active Control Engine-mount System,” Journal of Sound and Vibration, pp. 574-593.
- Wallace, C. Flower, 1985, “Understanding Hydraulic Mounts for Improved Vehicle Noise, Vibration and Ride Qualities,” SAE Paper, 850975.
- Sugino, M. and Abe, E., 1986, “Optimum Application for Hydroelastic Engine Mount,” SAE Paper 861412.
- Tako ZUhsijima and Takuya Dan, 1986, “Nonlinear B.B.A. for Predicting Vibration of Vehicle with Hydraulic Engine Mount,” SAE Paper 861412.
- Bouchillon, S., Shoureshi, R., Knurek, T. and Schilke, P., 1989, “Optimal Tuning of Adaptive Hydraulic Engine Mount,” SAE transactions, pp. 363-370.
- Kim, G. and Singh, R., 1995, “TA Study of Passive and Adaptive Hydraulic Engine Mount Systems with Emphasis on Non-linear Characteristics,” Journal of Sound and Vibration, Vol. 179 No. 3, pp. 427-453. https://doi.org/10.1006/jsvi.1995.0028
- Kang, K. T. and Won, K. M., 2001, “Optimal Design of Vehicle Engine Mount,” Proceedings of the KSME Annual Spring Conference, pp. 361-368.
- Jee, T. H. and Choi, Y. B., 1999, “Transfer Path Analysis on the Passenger Car Interior Noise,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 9, No. 1, pp. 97-102.
- HMC DFSS Black Belt Process 2007.
- Yun, Y. M., Bae, K. S., Kim, J. H. and Choi, S. B., 2003, “Robust Design of an ER Damper Using Taguchi Method,” Proceedings of the KSNVE Annual Spring Conference, pp. 157-162.
- Won, K. M., Yoon, H. W., Bang, J. H. and Kang, K. T., 2000, “Vibration Theory to Design Engine Mount System of Powertrain,” Proceedings of the KSNVE Annual Spring Conference, pp. 1907-1911.
- Lee, J. Y., 1996, “Experimental Study of Engine Mount Optimizatio to Improve NVH Quality,” Proceedings of the KSNVE Annual Conference, pp. 330-337.
- Won, K. M., Yoon, H. W., Kang, K. T., Yun, W. S. and Joo, S. J., 2002, “Development of Engine Mount Analysis Software,” Proceedings of the KSNVE Annual Spring Conference, pp. 700-704.
- Choi, H. S., Jang, I. K., Koo, J. K., Kim, S. M. and Kim, H. K., 2004, “The Optimal Design for Vehicle Door Trim Armrest Regard to Side Impact Test,” Proceedings of the KSME Annual Conference, pp. 882-886.
- Lee, W. S., Kim, Y. J. and Lee, Y. C., 2006, “Optimization of Engine Mounting System in Use of DFSS Tool,” Proceedings of the KSAE Annual Conference, pp. 1667-1674.
Cited by
- Development of automobile engine mounting parts using hot-cold complex forging technology vol.3, pp.2, 2016, https://doi.org/10.1007/s40684-016-0023-5