대한산업공학회지 (Journal of Korean Institute of Industrial Engineers)

  • 제36권1호
  • /
  • Pages.42-51
  • /
  • 2010
  • /
  • 1225-0988(pISSN)
  • /
  • 2234-6457(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지

차세대 반도체 펩을 위한 육각형 물류 구조의 설계

Hexagonal Material Flow Pattern for Next Generation Semiconductor Fabrication

  • 정재우 (경북대학교 경상대학 경영학부) ;
  • 서정대 (경원대학교 산업정보시스템공학과)
  • Chung, Jae-Woo (School of Business Administration, Kyungpook National University) ;
  • Suh, Jung-Dae (Department of Industrial Engineering, Kyungwon University)
  • 투고 : 2009.10.31
  • 심사 : 2010.02.22
  • 발행 : 2010.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The semiconductor industry is highly capital and technology intensive. Technology advancement on circuit design and process improvement requires chip makers continuously to invest a new fabrication facility that costs more than 3 billion US dollars. Especially major semiconductor companies recently started to discuss 450mm fabrication substituting existing 300mm fabrication of which facilities were initiated to build in 1998. If the plan is consolidated, the yield of 450mm facility would be more than doubled compared to existing 300mm facility. In steps of this important investment, facility layout has been acknowledged as one of the most important factors to be competitive in the market. This research proposes a new concept of semiconductor facility layout using hexagonal floor plan and its compatible material flow pattern. The main objective of this proposal is to improve the productivity of the unified layout that has been popularly used to build existing facilities. In this research, practical characteristics of the semiconductor fabrication are taken into account to develop a new layout alternative based on the analysis of Chung and Tanchoco (2009). The performance of the proposed layout alternative is analyzed using computer simulation and the results show that the new layout alternative outperforms the existing layout alternative, unified layout. However, a few questions on space efficiency to the new alternative were raised in communication with industry practitioners. These questions are left for a future study.

키워드

참고문헌

  1. Campbell, E. and Ammenheuser, J. (2000), 300 mm factory layout and material handling modeling : phase II report, Technology transfer, # 99113848B-ENG, International SEMATECH.
  2. Chen, H., Harrison, J. M., Mandelbaum, A., Ackere, A. V., and Wein, L. M. (1988), Empirical evaluation of a queueing network model for semiconductor wafer fabrication, Operations Research, 36(2), 202-215. https://doi.org/10.1287/opre.36.2.202
  3. Connors, D. P., Feigin, G. E., and Yao, D. D. (1996), Queueing network model for semiconductor manufacturing, IEEE Transactions on Semiconductor Manufacturing, 9(3), 412-427. https://doi.org/10.1109/66.536112
  4. Chung, J. and Jang, J. (2007), The integrated room layout, IEEE Transactions on Semiconductor Manufacturing, 20(4), 517-527. https://doi.org/10.1109/TSM.2007.907621
  5. Chung, J. and Tanchoco, J. M. A., Layout Design with Hexagonal Floor Plans and Material Flow Patterns, International Journal of Production Research, Forthcoming.
  6. Eppen, G. (1979), Effects of Centralization on Expected Costs in a Multi- Location Newsboy Problem, Management Science, 25(5), 498-501. https://doi.org/10.1287/mnsc.25.5.498
  7. Fischmann, C., Bottinger, F., Wertz, R., and Kunz, C. (2008), Buffer Management For Automated Material Handling Systems In Semiconductor Industries, Proceedings 22nd European Conference on Modelling and Simulation.
  8. Fowler, J. W., Hogg, G. L., and Mason, S. J. (2002), Workload control in the semiconductor industry, Production Planning and Control, 13(7), 568-578. https://doi.org/10.1080/0953728021000026294
  9. Geiger, C. D., Hase, R., Takoudis, C. G., and Uzsoy, R. (1997), Alternative facility layouts for semiconductor wafer fabrication facilities, IEEE Transactions on Components, Packing, And Manufacturing Technology-Part C, 20(2), 152-163.
  10. Hase, R., Takoudis G., and Uzsoy R. (1994), Cellular and reentrant layouts for semiconductor wafer fabrication facilities, IEEE/CPMT international electronics manufacturing technology symposium, 112-118.
  11. Hopp, W. J., Spearman, M. L., Chayet, S., Donohue, K. L., and Gel, E. S. (2002), Using an optimized queueing network model to support wafer fab design, IIE Transactions, 34(2), 119-130.
  12. Koike, A. (2000), A new fab concept in the 300 mm wafer era, Semiconductor Manufacturing, 2000. Proceedings of ISSM 2000. The Ninth International Symposium on, 44-47.
  13. Koike, A., Shimoyashiro, S., Kubota, K., Suzuki, N., Kiguchi, Y., Fujisawa, A., Takamatsu, A., and Okabe, T. (1995), A new LSI manufacturing scheme in the large-diameter wafer era for super-quick TAT development and volume production, Semiconductor Manufacturing, IEEE/UCS/SEMI International Symposium on, 239-242.
  14. Kong, S. H. (2007), Two-step simulation method for automatic material handling system of semiconductor fab, Robotics and Computer-Integrated Manufacturing, 23(4), 409-420. https://doi.org/10.1016/j.rcim.2006.05.004
  15. Lee, Y. H., Park, J., and Kim, S. (2001), Experimental study on input and bottleneck scheduling for a semiconductor fabrication line, IIE transactions, 34, 79-190.
  16. Lin, J. T., Wang, F. K., and Wu, C. K. (2003), Simulation analysis of the connecting transport AMHS in a wafer fab, IEEE Transactions on Semiconductor Manufacturing, 16(3), 555-564. https://doi.org/10.1109/TSM.2003.815211
  17. Mackulak, G. T. and Savory, P. (2001), A simulation-based experiment for comparing AMHS performance in a semiconductor fabrication facility, IEEE Transactions on Semiconductor Manufacturing, 14(3), 273-280. https://doi.org/10.1109/66.939828
  18. Mackulak, G. T., Lawrence, F. P., and Colvin, T. (1998), Effective simulation model reuse : A case study for AMHS modeling, Winter Simulation Conference Proceedings, 2, 979-984.
  19. Montoya-Torres, J. R. (2006), A literature survey on the design approaches and operational issues of automated wafer-transport systems for wafer fabs, Production Planning and Control, 17(7), 648-663. https://doi.org/10.1080/09537280600900774
  20. Montoya-Torres, J. R. (2007), Internal transport in automated semiconductor manufacturing systems : Novel approaches for tactical and operational management, Journal 4OR : A Quarterly Journal of Operations Research, 5(1), 93-97. https://doi.org/10.1007/s10288-006-0005-5
  21. Montoya-Torres, J. R., Dauzere-Peres, S., and Vermarien, L. (2006), A Consistent Approach for Vehicle Planning and Control in Large Unified Automated Material Handling Systems, 9th International Material Handling Research Colloquium.
  22. Nazzal, D. and Mcginnis, L. F. (2007), Analytical approach to estimating AMHS performance in 300mm fabs, International Journal of Production Research, 45(3), 571-590. https://doi.org/10.1080/00207540600792333
  23. Newell, G. F. (1973), Scheduling, Location, Transportation, and Continuum Mechanics : Some Simple Approximations to Optimization Problems, SIAM Journal on Applied Mathematics, 25(3).
  24. Noben, R., van Driel, R., and Claasen-Vujcic, T. (2001), Cycle time advantages of mini batch manufacturing and integrated metrology in a 300 mm vertical furnace, Semiconductor Manufacturing Symposium, 2001 IEEE International, 411- 414.
  25. Pettinato, J. S. and Pillai, D. (2005), Technology decisions to minimize 450mm wafer size transition risk, 18(4).
  26. Pillai, D. D., Bass, E. L., Dempsey, J. C., and Yellig, E. J. (2004), 300-mm full-factory simulations for 90-and 65-nm IC manufacturing, IEEE Transactions on Semiconductor Manufacturing, 17(3), 292-298. https://doi.org/10.1109/TSM.2004.831930
  27. Quinn, T. and Bass, E. (1999), 300 mm factory layout and material handling modeling : phase I report, Technology Transfer # 99023688 B-ENG, International SEMATECH.
  28. Singer, P. (2006), Transitioning to 450 mm wafers, Semiconductor International.
  29. Tompkins, J., White, J., Bozer, Y., and Tanchoco, J. (2003), Facilities Planning, John Wily and Sons, 3rd edition.
  30. Turley, J. (2003), The essential guide to semiconductors, Prentice Hall, Upper Saddle River, NJ.