Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Prediction Model for Low Cycle and High Cycle Fatigue Lives of Pre-strained Fe-18Mn TWIP Steel

Fe-18Mn TWIP강의 Pre-strain에 따른 저주기 및 고주기 피로 수명 예측 모델

  • 김용우 (포항공과대학교 신소재공학과) ;
  • 이종수 (포항공과대학교 신소재공학과)
  • Published : 2010.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The influence of pre-strain on low cycle fatigue behavior of Fe-18Mn-0.05Al-0.6C TWIP steel was studied by conducting axial strain-controlled tests. As-received plates were deformed by rolling with reduction ratios of 10 and 30%, respectively. A triangular waveform with a constant frequency of 1 Hz was employed for low cycle fatigue test at the total strain amplitudes in the range of ${\pm}0.4\;{\sim}\;{\pm}0.6$ pct. The results showed that low-cycle fatigue life was strongly dependent on the amount of pre-strain as well as the strain amplitude. Increasing the amount of prestrain, the number of reversals to failure was significantly decreased at high strain amplitudes, but the effect was negligible at low strain amplitudes. A new model for predicting fatigue life of pre-strained body has been suggested by adding ${\Delta}E_{pre-strain}$ to the energy-based fatigue damage parameter. Also, high-cycle fatigue lives predicted using the low-cycle fatigue data well agreed with the experimental ones.

Keywords

References

  1. ULSAB-AVC Report, 2002.
  2. H. Hofmann ea al, 2005, Properties of austenite high manganese steels with induced plasticity(L-IP steel), proceedings of SCT2005, 73.
  3. D. Lefebvre, F. Ellyin, 1984, Cyclic response and inelastic strain energy in low-cycle fatigue, Int. J. Fatigue, Vol. 6, No. 1, pp. 9-15 https://doi.org/10.1016/0142-1123(84)90003-3
  4. F. Ellyin, D. Kujawski, 1984, Plastic strain energy in fatigue failure, J. Pressure Vessel Technol., Trans. ASME, Vol. 106, pp. 342-347. https://doi.org/10.1115/1.3264362
  5. F. Ellyin, 1997, Fatigue Damage, Crack Growth and Life Prediction, First edition, Chapman & Hall, London, pp. 85-97.
  6. F. Ellyin, D. Kujawski, 1986, An energy-based fatigue failure criterion, in Microstructure and Mechanical Behaviour of Materials, EMAS, Vol. II, West Midlands, UK, pp. 541-600.
  7. K. Golos, F. Ellyin, 1987, Generalization of cumulative damage criterion to multilevel cyclic loading, Theor. Appl. Fract. Mech., Vol. 7, pp. 169-176. https://doi.org/10.1016/0167-8442(87)90032-2
  8. K. Golos, F. Ellyin, 1988, A total strain energy density theory for cumulative damage, J. Pressure Vessel Technol., AMSE, Vol. 110, pp. 36-41. https://doi.org/10.1115/1.3265565
  9. George E. Dieter, 1988, Mechanical Metallurgy. SI Metric ed., McGraw-Hill, London. pp. 382-387.