대한토목학회논문집 (KSCE Journal of Civil and Environmental Engineering Research)
- 제30권3C호
- /
- Pages.141-148
- /
- 2010
- /
- 1015-6348(pISSN)
- /
- 2799-9629(eISSN)
DOI QR Code
다중필터링에 의한 PDC-R 기법의 자동화 해석
Automated Analysis for PDC-R Technique by Multiple Filtering
- 투고 : 2010.01.18
- 심사 : 2010.03.21
- 발행 : 2010.06.30
초록
지반내 존재하는 자연전위, 돌발성 전기잡음, 60Hz 전기잡음 등은 전기비저항 시험에 있어서 신뢰성을 저하하는 요인 중의 하나이다. 특히 최근 개발된 저주파 교류를 사용하는 PDC-R(Pseudo DC Resistivity) 시험의 자료해석에 있어서도 해석의 신뢰성을 저하시키는 요인이 되고 있다. 즉 직류기반 전기비저항 시험, 교류기반 전기비저항 시험 모두에 있어서 정도의 차이가 있을 뿐 전기잡음은 전기비저항 기법의 신뢰도에 여전히 영향을 주고 있다. 본 연구에서는 PDC-R 기법의 자료해석에 있어서 전기잡음의 영향을 최소화하여 기법의 신뢰성을 제고할 수 있는 방안을 제시하였다. 또한 이를 구현하는 자동화 알고리듬을 이용하여 PDC-R 기법의 적용성도 개선하도록 하였다. 본 연구에서 제안하는 PDC-R 시험데이터의 자동화 해석기법은 두 단계로 구성되어 있는데, 그 첫 번째는 다중필터링을 사용하여 입력전류와 동일한 주파수 성분을 추출하는 것이고, 두 번째 단계는 추출된 자료 중에서 안정적 거동의 신호성분만 분류해 내는 작업을 수행하는 것이다. 이러한 자동화 기법은 자연전위, 돌발성 잡음, 60Hz 전기잡음 등을 포함한 가상의 조화함수를 이용하여 그 정확성과 안정성을 확인하였다. 또한 현장적용을 통하여 제안된 기법의 적용성 및 정확성도 확인할 수 있었다.
Electrical noises like self potential, burst noises and 60-Hz electrical noises are one of the causes to reduce reliability of electrical resistivity survey. Even the PDC-R (Pseudo DC resisitivity) technique, recently developed, is suffering from the problem of low reliability due to electrical noises. That is, both DC-based and AC-based resistivity technique is subject to reliability problem due to electrical noises embedded in urban geotechnical sites. In this research, a new technique to enhance reliability of the PDC-R technique by minimizing influence of electrical noises was proposed. In addition, an automated procedure was also proposed to facilitate data analysis and interpretation of PDC-R measurements. The proposed technique is composed of two steps: 1. to extract information only related with the input current by means of multiple-filter technique, and 2. to undertake a task to sort out signal information only to show stable and reliable characteristics. This automated procedure was verified by a synthetic harmonic wave including DC shift, burst random noises and 60-Hz electrical noises. Also the procedure was applied to site investigation at urban areas for proving its feasibility and accuracy.