참고문헌
- G. T. Lim, B. J. Kim, K. W. Lee, M. J. Lee, Y. C. Joo and Y. B. Park, "Studt on the intermetallic compound growth and interfacial adhesion energy of Cu pillar bump", J. Microelec-tron. Packag. Soc, 15(4), 17 (2008).
- E. J. Jang, S. Pfeiffer, B. Kim, T. Matthias, S. Hyun, H. J. Lee and Y. B. Park, "Effect of post-annealing conditions on interfacial adhesion energy of Cu-Cu bonding for 3-D IC integration", Kor. J. Mater. Res., 18(4), 204 (2008). https://doi.org/10.3740/MRSK.2008.18.4.204
- S. W. Seo and G S. Kim, "The film property and deposition process of TSV inside for 3D interconnection", J. Microelec-tron. Packag. Soc., 15(3), 47 (2008).
- H. Tilmans, D. Van de Peer, and E. Beyne, "The intend reflow sealing technique, a method for fabrication of sealed cavities for MEMS devices", J. Microelectromech. Syst., 9, 206 (2000). https://doi.org/10.1109/84.846701
- J.-Q. Lu, Y. Kwon, R. P. Kraft, R. J. Gutman, J. F. McDonald, and T. S. Cale, "Stacked Chip-to-Chip interconnections using wafer bonding technology with eielectric bonding glues", Proceedings of the IEEE International Interconnect Technology Conference, 219 (2001).
- R. Tadepalli, Ph. D. Thesis, "Characterization and requirements for Cu-Cu bonds for three-dimensional integrated circuits", Massachusetts Institute of Technology (2007).
- M. S. Yoon, M. K. Ko, O. H. Kim, Y. B Park, W. D. Nix and Y. Chang. Joo, "In-Situ observation of electromigration in eutectic SnPb solder lines : atomic migration and hillock formation", J. Electron. Mat, 37, 118 (2007). https://doi.org/10.1007/s11664-007-0301-7
- R. Tadepalli, K. T. Turner, C. V. Thompson, "Mixed-mode interface toughness of wafer-level Cu-Cu bonds using a symmetric chevron test", J. Mech. Phys. Solids, 56, 707 (2008). https://doi.org/10.1016/j.jmps.2007.07.016
- K. N. Chen, C. S. Tan, A. Fan and R. Reif, "Copper bonded layers analysis and effects of copper surface conditions on bonding quality for three-dimensional integration", J. Electron. Mat., 34, 1464 (2005). https://doi.org/10.1007/s11664-005-0151-0
- K. N. Chen, S. M. Chang, L. C. Shen, and R. Reif, "Bonding parameters of blanket copper wafer bonding", J. Electron. Mat., 35, 1082 (2006). https://doi.org/10.1007/BF02692570
- H. Zhenyu, Z. Suo, X. Guanghai, H. Jun, J. H. Prevost and N. Sukumar, "Initiation and arrest of an interfacial crack in a four-point bednd test", Eng. Fracture Mech, 72, 2584 (2005). https://doi.org/10.1016/j.engfracmech.2005.04.002
- R. H. Dauskardt, M. Lane, Q. Ma and N. Krishna, "Adhesion and debonding of multi-layer thin film structures", Eng Fract Mech, 61, 141 (1998). https://doi.org/10.1016/S0013-7944(98)00052-6
- P. G. Charalambides, J. Lund, A. G. Evans and R. M. McMeeking, "A test specimen for determining the fracture resistance of bimaterial interfaces", J. Appl. Mech, 111, 77 (1989).
- K. N. Chen, A. Fan, C. S. Tan and R. Reif, "Temperature and duration effects on microstructure evolution during copper wafer bonding", J. Electron. Mat, 32, 1371(2003). https://doi.org/10.1007/s11664-003-0103-5