Abstract
In this study, Based on the optimization developed in Um et al. (2009), optimum design method of the alignment when building new lines and renewing existing ones is presented. The object function used for optimization is passenger comfort ($P_{CT}$) which was proposed in BSI (2006). Other aspects of track/vehicle interaction will be treated in boundary conditions. And track/vehicle interaction analysis is peformed using KTX-II model. From the analysis results, it was found that the optimum alignments are affected by the angle (I) between adjacent straight lines and $R-L_t$ combinations. Also the dynamic analysis confirms well the results from the simplified analysis. However, In the most cases, the $P_{CT}$ values in the dynamic analysis are higher than the simplified $P_{CT}$ values. If both methods are used when optimizing the alignment, it will be possible to design the alignments more rapidly and reliably.
본 연구에서는 승차감을 목적함수로 하고 궤도부담력을 경계조건으로 하는 곡선부 평면선형의 최적설계 기법을 제시하였다. 평면선형 최적화시 중요한 변수인 곡선반경-완화곡선장은 엄주환 등(2009)에서 제시한 결정방법을 적용하였으며 승차감 평가방법은 영국 BSI(2006)에서 제시하는 곡선부 전용 승차감 평가방법인 $P_{CT}$방법을 활용하였다. 또한 한국형 고속전철 G7(KTX-II)모델을 이용한 차량/궤도선형 상호작용 해석을 수행하였다. 해석결과, 최적선형조건은 교각 I(곡선부 양 끝단 직선과 직선이 만나는 교차각) 크기 및 곡선반경-완화곡선장 조합에 따라 다름을 알 수 있었다. 또한 Kufver(1997) 등에서 제시하는 간략화 해석방법과 유사한 경향이 나타남을 알 수 있었으나, 대부분의 경우 동적해석결과 값이 크게 나타났다. 따라서 곡선부 최적선형 설계시 동적해석과 간략화 해석을 병행한다면 신속하고 신뢰성 높은 최적선형을 결정할 수 있을 것으로 판단된다.