참고문헌
- R. J. M. Borggreve, R. J. Gaymans, J. Schuijer, and T. F. Housz, 'Brittle-Tough Transition in Nylon-Rubber Blends', Polymer, 28, 1489 (1987) https://doi.org/10.1016/0032-3861(87)90348-X
- S. Wu, 'Phase Structure and Adhesion in Polymer Blends', Polymer, 26, 1885 (1985) https://doi.org/10.1016/0032-3861(85)90019-9
- M. I. Kohan, 'Nylon Plastics Handbook', p. 236, Hanser Publishers, New York, 1995
- J. Stehlicek, J. Hauer, and R. Puffr, 'Block Copolymers of 6-Hexanlactam and 12-Dodecanlactam', Polymer, 37, 2533 (1996) https://doi.org/10.1016/0032-3861(96)85369-9
- M. V. Pandya, M. Subramaniyam, and M. R. Desai, 'Synthesis and Charcterization of Nylon 6 Triblock Copolymer Using New Hybrid Soft Segment', Eur. Polym. J., 33, 789 (1997) https://doi.org/10.1016/S0014-3057(96)00282-0
- T. O. Ahn, S. C. Hong, H. M. Jeong, and J. H. Kim, 'Nylon 6 - Polyethersulfone - Nylon 6 Block Copolymer', Polymer, 38, 207 (1997) https://doi.org/10.1016/S0032-3861(96)00450-8
- R. M. Hedrick and J. D. Gabbert, ACS Symp. Ser., 270, 1135 (1985)
- Y. Li, Z. Huang, and Y. Lu, 'Electrospinning of Nylon 6, 66, 1010 Terpolymer', Eur. Polym. J., 42, 1696 (2006) https://doi.org/10.1016/j.eurpolymj.2006.02.002
- G. C. Rutledge and S. V. Fridrikh, 'Formation of Fibers by Electrospinning', Advanced Drug Delivery Rev., 59, 1384 (2007) https://doi.org/10.1016/j.addr.2007.04.020
- S. O. Han, J. H. Youk, K. D. Min, Y. O. Kang, and W. H. Park, 'Electrospining of Cellulose Acetate Nanofiber Using a Mixed Solvents of Acetic Acid-Water', Mater. Lett. 62, 759 (2008) https://doi.org/10.1016/j.matlet.2007.06.059
- Y. J. Ryu, H. Y. Kim, K. H. Lee, H. C. Park, and D. R. Lee, 'Transport Properties of Electrospun Nylon 6 Non-woven Mats', Eur. Polym. J., 39, 1883 (2003) https://doi.org/10.1016/S0014-3057(03)00096-X
- Y. C. Ahn, S. K. Park, G. T. Kim, Y. J. Hwang, C. G. Lee, H. S. Shin, and J. K. Lee, 'Investigation on Characteristics of Thermal Conductivity Enhancement of Nanofluids', Current Appl. Phys., 6, 1030 (2006) https://doi.org/10.1016/j.cap.2005.07.013
- I. S. Chronakis, S. Grapenson, and A. Jakob, 'Conductive Polypyrrole Nanofibers via Electrospinning', Polymer, 47, 1597 (2006) https://doi.org/10.1016/j.polymer.2006.01.032
- K. Kim, M. Yu, X. Zong, J. Chiu, D. Fang, Y. Seo, B. Hsiao, B. Chu, and M. Hadjiargyrou, 'Control of Degradation Rate and Hydrophilicity in the Electrospun Non-woven Poly(D, L-lactide) Nanofiber Scalffold for Biomedical Applications', Biomaterials, 24, 4977 (2003) https://doi.org/10.1016/S0142-9612(03)00407-1
- Z. M. Huang, Y. Z. Zhang, M. Kotaki, and R. Ramakrishna, 'A Review on Polymer Nanofibers by Electrospinning', Compos. Sci. and Techn, 63, 2223 (2003) https://doi.org/10.1016/S0266-3538(03)00178-7
- A. Bogaerts, E. Neyts, R. Gijbels, and J. Mullen, 'Gas Discharge Plamsa and Their Applications', Spectrochimica Acta, Part B, 57, 609 (2002) https://doi.org/10.1016/S0584-8547(01)00406-2
- H. E. Wagner, R. Brandenburg, K. V. Kozlov, A. S. Sonnenfeld, P. Michel, and J. F. Behnke, 'The Barrier Discharge: Properties and Applications to Surface Treatment', Vacuum, 71, 417 (2003) https://doi.org/10.1016/S0042-207X(02)00765-0
- J. B. Lynch, P. D. Spence, D. E. Baker, and T. A. Postlethwaite, 'Atmospheric Pressure Plasma Treatment of Polyethylene via Pulse Barrier Discharge', J. Appl. Polym. Sci, 71, 319 (1999) https://doi.org/10.1002/(SICI)1097-4628(19990110)71:2<319::AID-APP16>3.0.CO;2-T
- M. S. Kim, G. Khang, and H. B. Lee, 'Gradient Polymer Surface for Biomedical Applications', Prog. Polym. Sci., 33, 138 (2008) https://doi.org/10.1016/j.progpolymsci.2007.06.001
- R. Morent, N. De Geyter, J. Verschuren, K. De Clerck, P. Kiekens, and C. Leys, 'Non-thermal Plasma Treatment of Textiles', Surface & Coatings Technology, 202, 3427 (2008) https://doi.org/10.1016/j.surfcoat.2007.12.027
- R. M. Hedrick, J. D. Gabbert, 'A new RIM system from nylon 6 block copolymers: Chemistry and Structure'; presented at the AIChE National Meeting; Detroit, August 17, 1981
- H. Mooij et. al. in 'UTECH 90 Conference Papers'; Crain Communications: London, 118-121, 1990
- V. Pandya, M. Subramaniyam, and M. R. Desai, 'Synthesis and Charcterization of Nylon 6 Triblock Copolymer Using New Hybrid Soft Segment', Eur. Polym. J., 33, 789 (1997) https://doi.org/10.1016/S0014-3057(96)00282-0
- C. Ibanes, M. de Boissieu, L. David, and R. Seguela, 'High Temperature Behavior of the Crystalline Phase in Unfilled and Clay Filled Nylon 6', Polymer, 47, 5071 (2006) https://doi.org/10.1016/j.polymer.2006.05.025
- T. Sakurai, G. Amador, and T. Takahashi, 'Block Copolymers Based on Nylon 6 and Polyethylene Glycol', Polymer, 39, 4089 (1998) https://doi.org/10.1016/S0032-3861(97)00479-5
- J. S. Stephens, D. B. Chase, and J. F. Rabolt, 'Effect of the Electrospinning Process on Polymer Crystallization Chain Fibers Conformation in Nylon 6 and Nylon 12', Macromolecules, 37, 877 (2004) https://doi.org/10.1021/ma0351569
- M. Afshari, R. Kotek, and A. E. Tonelli, 'Nanofibers and Nanotechnology in Textiles', p. 71, Woodhead Publishing Ltd, London, 2007
- M. V. Jose, B. W. Steunrt, V. Thomas, D. R. Dean, M. A. Abdalla, G. Price, and M. Janowski, 'Morphology and Mechanical Properties of Nylon 6/MWNT Nanofibers', Polymer, 48, 1096 (2007) https://doi.org/10.1016/j.polymer.2006.12.023