DOI QR코드

DOI QR Code

Development of Myoelectric Hand with Infrared LED-based Tactile Sensor

적외선 소자 기반의 촉각센서를 가진 근전의수 개발

  • 정동현 (경북대학교 전자전기컴퓨터학부) ;
  • 추준욱 (경북대학교 전자전기컴퓨터학부) ;
  • 이연정 (경북대학교 전자전기컴퓨터학부)
  • Published : 2009.08.01

Abstract

This paper proposes an IR (infrared) LED (Light Emitting Diode)-based tactile fingertip sensor that can independently measure the normal and tangential force between the hand and an object. The proposed IR LED-based tactile sensor has several advantages over other technologies, including a low price, small size, and good sensitivity. The design of the first prototype is described and some experiments are conducted to show output characteristics of the proposed sensor. Furthemore, the effectiveness of the proposed sensor is demonstrated through anti-slip control in a multifunction myoelectric hand, called the KNU Hand, which includes several novel mechanisms for improved grasping capabilities. The experimental results show that slippage was avoided by simple force control using feedback on the normal and tangential force from the proposed sensor. Thus, grasping force control was achieved without any slippage or damage to the object.

Keywords

References

  1. N. Dechev, W. L. Cleghorn, and S. NalUTIann, "Multiple finger, passive adaptive grasp prosthetic hand," Mechanism and Machine Theory, vol. 36, pp. 1157-1173,2001. https://doi.org/10.1016/S0094-114X(01)00035-0
  2. M. C. Carrozza, C. Suppo, F. Sebastiani, B. Massa, F. Vecchi, R. Lazzarini, M. R. Cutkosky, and P. Dario, "The SPRING hand: Development of a self-adaptive prosthesis for restoring natural grasping," Autonomous Robots, vol. 16, pp. 125-141,2004 https://doi.org/10.1023/B:AURO.0000016863.48502.98
  3. B. Massa, S. Roccella, M. C. Carrozza, and P. Dario, "Design and development of an underactuated prosthetic hand," in Proc. IEEE Int. Con! Robotics and Automation, pp. 3374-3379, 2002 https://doi.org/10.1109/ROBOT.2002.1014232
  4. A. M. Dollar and R. D. Howe, "The SDM hand as a prosthetic tenninal device: A feasibility study," in Proc. IEEE Int. Corf. Rehabilitation Robotics, pp. 978-983, 2007
  5. P. J. Kyberd, C. Light, P. H. Chappell, J. M. Nightingale, D. Whatley, and M. Evans, "The design of anthropomorphic prosthetic hands: A study of the southampton hand," Robotica, vol. 19, pp. 593-600,2001
  6. J. Zhao, L. Jiang, S. Shi, J. Cai, H. Liu, and G Hirzinger, "A five-fingered underactuated prosthetic hand system," in Proc. IEEE Int. Corf. Mechatronics and Automation, pp. 1453-1458, 2006
  7. M. C. Carrozza, G Cappiello, S. Micera, B. B. Edin, L. Beccai, and C. Cipriani, "Design of a cybernetic hand for perception and action," Biological Cybernetics, vol. 95, pp. 629-644, 2006 https://doi.org/10.1007/s00422-006-0124-2
  8. J. L. Pons, E. Rocon, R. Ceres, D. Reynaerts, B. Saro, S. Levin, and W. Moorleghern, "The MANUS-HAND Dextrous Robotics Upper Limb Prosthesis: Mechanical and Manipulation Aspects," Autonomous Robots, vol. 16, pp. 143-163,2004 https://doi.org/10.1023/B:AURO.0000016862.38337.f1
  9. Otto Bock Health Care, MYOBOCK Arm Components, 2005
  10. P. J. Kyberd and J. L. Pons, "A Comparison of the Oxford and Manus Intelligent Hand Prostheses," in Proc. IEEE Int. Corf. Robotics andAutomation, pp. 14-19,2003
  11. B. J. Choi, S. H. Lee, and H. R. Choi, "Development of Anthropomorphic Robot Hand with Tactile Sensor : SKKU Hand II," in Proc. lEEElRSJ Int. Corf. Intelligent Robots and Systems, pp. 3779-3784, 2006 https://doi.org/10.1109/IROS.2006.281763
  12. J. Ueda, Y. Ishida, M. Kondo, and T. Ogasawara, "Development of the NAIST -Hand with Vision-based Tactile Fingertip Sensor," in Proc. IEEE Int. Conf. Robotics and Automation, pp. 2332-2337,2005
  13. J. U. Chu, D. H. Jung, and Y. J. Lee, "Design and Control of a Multifunction Myoelectric Hand with New Adaptive Grasping and Self-locking Mechanisms," in Froc. IEEE Int. Corf. Robotics andAutomation, pp. 743-748, 2008 https://doi.org/10.1109/ROBOT.2008.4543294
  14. T. Laliberte and C. M. Gosselin, "Under-actuation in space robotic hands," in Proc. Int. Symp. Artificial and Robotics & Automation in Space, pp. 18-22,2001
  15. J. Rossiter and T. Mukai, "A Novel Tactile Sensor Using a Matrix of LEDs Operating in Both Photoemitter and Photodetector Modes," in Proc. IEEE Sensors 2005, pp. 994-997,2005
  16. J. Rossiter and T. Mukai, "An LED-based Tactile Sensor for Multi-sensing over Large Areas," in Proc. IEEE Sensors 2006, pp. 835-838, 2006 https://doi.org/10.1109/ICSENS.2007.355597
  17. M. Ohka, H. Kobayashi, J. Takata, and Y. Mitsuya, "Sensing Precision of an Optical Three-axis Tactile Sensor for a Robotic Finger," in Proc. IEEE Int. Symp. on Robot and Human Interactive Communication, pp. 214-219,2006