참고문헌
- Webster, G. A., Ainsworth, R. A., 1994, 'High Temperature Component Life Assessment,' Chapman & Hall
- R5: An Assessment Procedure for the High Temperature Response of Structures. Revision 2, British Energy, 2003
- Miller, A. G., Ainsworth, R. A., 1989, 'Consistency of Numerical Results for Power-Law Hardening Materials and the Accuracy of the Reference Stress Approximation for J,' Engineering Fracture Mechanics, Vol. 32, No. 2, pp. 233~247 https://doi.org/10.1016/0013-7944(89)90296-8
- Kumar, V., German, M. D. and Shih C. F., 1981, 'An Engineering Approach for Elastic Plastic Fracture Analysis,' EPRI report, No. 1931
- British Energy Generation Ltd., 2007, 'R6:Assessment of the Integrity of Structures Containing Defects,' Rivision 4
- Kim, J. S., Kim, Y. J. and Kim, Y. J., 2002, Estimation of C*-Integral for Defective Components with General Creep Deformation Behaviors,' Trans. of the KSME(A), Vol. 26, No. 5, pp. 795~802 https://doi.org/10.3795/KSME-A.2002.26.5.795
- Huh, N. S., Kim, Y. J. and Kim, Y. J., 2003, 'Creep Fracture Mechanics Analysis for Through-Wall Cracked Pipes Under Widespread Creep Condition, Trans. of the KSME(A), Vol. 27, No. 6, pp. 890~897 https://doi.org/10.3795/KSME-A.2003.27.6.890
- Nikbin, K. M., Webster, G. A. and Turneer, C. E., 1976, 'Relevance of Nonlinear Fracture Mechanics to Creep Cracking, Cracks and Fractured,' ASTM STP 601, pp. 47~62
- Harper, M. P., Ellison, E. G., 1977, 'The Use of the C* Parameter in Predicting Creep Crack Propagation Rates,' Journal of Strain Analysis, Vol. 12, pp. 167~199 https://doi.org/10.1243/03093247V123167
- Riedel, H., Rice, J. R., 1980, 'Tensile Cracks in Creeping Solids,' Fracture Mechanics : Twelfth Conference, ASTM STP 700, pp. 112-130
- Ehlers, R., Riedel, H., 1981, 'A Finite Element Analysis of Creep Deformation in a Specimen Containing a Macroscopic Crack,' In Proc. Fifth Int. Conf. on Fracture (Edited by D. Francois), Vol. 2, pp. 691~698, Pergamon Press, Oxford
- Ainsworth, R. A., Budden, P. J., 1990, 'Crack Tip Fields Under Non-Steady Creep Conditions-I. Estimates of the Amplitude of the Fields,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 13, No. 3, pp. 263~276 https://doi.org/10.1111/j.1460-2695.1990.tb00598.x
- Ainsworth, R. A., Budden, P. J., 1990, 'Crack tip Fields Under Non-Steady Creep Conditions - II. Estimates of Associated Crack Growth,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 13, No. 3, pp. 277~285 https://doi.org/10.1111/j.1460-2695.1990.tb00599.x
- Kim, Y. J., 2001, 'Contour Integral Calculations for Generalized Creep Laws Within ABAQUS,'International Journal of Pressure Vessels and Piping, Vol. 78, pp. 661~666 https://doi.org/10.1016/S0308-0161(01)00080-1
- Kim, Y. J., Dean, D. W. and Budden, P. J., 2001, 'Finite Element Analysis to Assess the Effect of Initial Plasticity on Transient Creep for Defects Under Mechanical Loading,' International Journal of Pressure Vessels and Piping, Vol. 78, pp. 1021~1029 https://doi.org/10.1016/S0308-0161(01)00119-3
- Joch, J., Ainsworth, R. A., 1992, 'The Development of Creep Singular Fields for Defects in Thermally Loaded Structures,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 15, No. 7, pp. 685~693 https://doi.org/10.1111/j.1460-2695.1992.tb01306.x
- Lei, Y., 2008, 'Finite Element RCC-MR Creep Analysis of Circumferentially Cracked Cylinders Under Combined Residual Stress and Mechanical load,' British Energy Report E/REP/BDBB/0027/GEN/07, British Energy Generation Limited
- Song, T. K., Kim, Y. J., 2009, 'Estimation of C(t)- Integral in Transient Creep Condition for Pipe with Crack Under Combined Mechanical and Thermal Stress (Part II : Elastic-plastic-creep), Submitted to Transactions of the KSME(A) https://doi.org/10.3795/KSME-A.2009.33.9.949
- Song, T. K., Kim, Y. J., Kim, J. S., Jin, T. E., 2007, 'Limit Load and Approximate J-Integral Estimates for Axial-Through Wall Cracked Pipe Bend,' Trans. of KSME(A), Vol. 31, No. 5, pp.562~569 https://doi.org/10.3795/KSME-A.2007.31.5.562
- Song, T. K., Oh, C. K., Kim, Y. J., Kim, J. S., Jin, T. E., 2007, 'Elastic-Plastic Fracture Mechanics Analyses for Circumferential Part-Through Surface Cracks at the Interface Between Elbows and Pipes,' Trans. of KSME(A), Vol. 31, No. 6, pp.710~717 https://doi.org/10.3795/KSME-A.2007.31.6.710
- Song, T. K., Oh, C. K., Kim, Y. J., 2008, 'V-Factor Estimation Under Thermal and Mechanical Stress for Circumferentially Cracked Cylinder,' Trans. of KSME(A), Vol. 32, No. 12, pp. 1123~1131 https://doi.org/10.3795/KSME-A.2008.32.12.1123
피인용 문헌
- Estimation of C(t) -Integral Under Transient Creep Conditions for a Cracked Pipe Subjected to Combined Mechanical and Thermal Loads Depending on Loading Conditions vol.35, pp.6, 2011, https://doi.org/10.3795/KSME-A.2011.35.6.609
- Estimations of the C(t)-Integral in Transient Creep Condition for Pipe with Crack Under Combined Mechanical and Thermal Stress (I) - Elastic-Creep - vol.33, pp.9, 2009, https://doi.org/10.3795/KSME-A.2009.33.9.949