고주파열처리를 적용한 캠 샤프트 소재의 피로균열진전 특성

Characteristics of Fatigue Crack Growth for Camshaft Material Applied to High Frequence Induction Treatment

  • 이현준 (경상대학교 대학원 정밀기계공학과) ;
  • 박성호 (경상대학교 대학원 정밀기계공학과) ;
  • 박원조 (경상대학교 정밀기계공학과 해양산업연구소)
  • Lee, Hyun-Jun (Department of Mechanical and Precision Engineering, Gyeongsang Nat'l. Univ.) ;
  • Park, Sung-Ho (Department of Mechanical and Precision Engineering, Gyeongsang Nat'l. Univ.) ;
  • Park, Won-Jo (Department of Mechanical and Aerospace Engineering, Institute of Marine Industry, Gyeongsang Nat'l. Univ.)
  • 발행 : 2009.06.30

초록

Nowadays, many components in automobile, aircraft, offshore structure and industry require lightness and high strength. However, since developments of advanced materials have limitations, it mainly is applying to method of surface hardening. This study offered research about camshaft that is one among engine important component. The material used in this study is 0.53% carbon steel as structure material of camshaft, splineshaft, coupling, pulley, driveshaft et cetera. Camshaft is processed using mainly carbon steel, and receives wear and fatigue by special quality high speed of parts. Therefore, camshaft need surface hardening to improve camshaft's fatigue life and increase durability of engine. This study compare to residual stress and martensite microstructure created by high frequency induction treatment, and these results lead to the conclusion of fatigue crack growth characteristics.

키워드

참고문헌

  1. 안석환, 최문오, 정정환, 김성광, 남기우 (2008). "용접사이클 재현에 의한 SS400강 및 STS304강의 특성평가", 한국해양공학회지, Vol 22, No 6, pp 27-34
  2. 송지호, 김정엽 (2006). 피로균열 - 균열닫힘과 진전속도 추정법, 도서출판 인터비젼, pp 31-32
  3. Haidemenopoulos, G.N. (2001). "Coupled Thermodynamics Kinetic Analysis of Diffusional Transformations during Laser Hardening and Laser Welding", Journal of Alloys and Compounds, Vol 321, pp 302-307
  4. Jeon, H.B., Song, T.H., Park, S.H., Huh, S.C. and Park, W.J. (2008). "A Study on Fracture Characteristics of the SM53C Used in the Cam Shaft, International Journal of Modern Physics B", Vol 22, No 9/11, pp 1846-1852 https://doi.org/10.1142/S0217979208047511
  5. Kim, J.D. and Ji, J.K., (2006). "Effect of Super-Rapid Induction Quenching on Fatigue Fracture Behavior of Spherical Graphite Cast Iron FCD500", Journal of Materials Processing Technology, Vol 176, Issue 1-3, pp 19-23 https://doi.org/10.1016/j.jmatprotec.2005.11.024
  6. Lim, M.B., Yoon, H.K. and Park, W.J. (2002). "A Study on the X-ray Diffraction Analysis and the Fatigue Crack Growth Behavior for the Gas Piping Material", 한국해양공학회지, Vol 16, No 3, pp 54-58
  7. Paris, P. and Erdogan, F. (1963). "A Critical Analysis of Crack Propagation", Laws. J. Basic Eng., Trans. ASME, pp 528-534
  8. Park, W.J., Huh, S.C. and Park, S.H. (2006). "A Study on the Fatigue Characteristics of Al6061-T651 by Shot Peening Velocity", Key Engineering Materials, 326-328 II, pp 1093-1096
  9. Pineau, A.G. and Pelloux, R.M. (1974). "Influence of Strain-induced Martensitic Transformations on Fatigue Crack Growth Rates in Stainless Steels", Metallurgical Transactions, Vol 5, Issue 5, pp 1103-1112 https://doi.org/10.1007/BF02644322
  10. Stewart, A.T. (1980). "The Influence of Environment and Stress Ratio on Fatigue Crack Growth at Near Threshold Stress Intensities in Low-alloy Steels", Engineering Fracture Mechanics, Vol 13, pp 463-478 https://doi.org/10.1016/0013-7944(80)90078-8
  11. Suresh, S., Zamiski G.F. and Ritchie R.O. (1988). "Oxideinduced Crack Closure: An Explanation for Nearthreshold Corrosion Fatigue Crack Growth Behavior", Metallurgical Transaction, Vol 12A, pp 1435-1443
  12. Totik1, Y., Sadeler, R., Altun, H. and Gavgali, M. (2003). "The Effects of Induction Hardening on Wear Properties of AISI 4140 Steel in Dry Sliding Conditions", Materials & Design, Vol 24, Issue 1, pp 25-30 https://doi.org/10.1016/S0261-3069(02)00099-7
  13. Tamas, R., Gyula, B., Imre, F., Balazs, V. and Tom, B. (1999). "Prediction of As-quenched Hardness after Rapid Austenitization and Cooling of Surface Hardened Steels", Computational Materials Science, Vol 15, pp 101-112 https://doi.org/10.1016/S0927-0256(98)00128-1