Stacked Interleaved 방식의 50MHz 스위칭 주파수의 벅 변환기

Stacked Interleaved Buck DC-DC Converter With 50MHz Switching Frequency

  • 김영재 (한양대학교 전자컴퓨터공학) ;
  • 남현석 (한양대학교 전자컴퓨터공학) ;
  • 안영국 (한양대학교 전자컴퓨터공학) ;
  • 노정진 (한양대학교 전자컴퓨터공학)
  • Kim, Young-Jae (Dep. of Electronic, Electrical, Control and Instrumentation Engineering, Hanyang Univ.) ;
  • Nam, Hyun-Seok (Dep. of Electronic, Electrical, Control and Instrumentation Engineering, Hanyang Univ.) ;
  • Ahn, Young-Kook (Dep. of Electronic, Electrical, Control and Instrumentation Engineering, Hanyang Univ.) ;
  • Roh, Jeong-Jin (Dep. of Electronic, Electrical, Control and Instrumentation Engineering, Hanyang Univ.)
  • 발행 : 2009.06.25

초록

본 논문에서는 인덕터와 커패시터를 집적화한 DC-DC 벅 변환기를 설계하였다. 출력전압의 리플크기를 줄이기 위해 stacked interleaved 방식을 이용하였고 변환기의 제어부는 전압모드 방식의 제어방법을 사용하여 설계하였다. 설계한 DC-DC 벅 변환기는 표준 $0.5{\mu}m$ CMOS 공정으로 제작 중이며 전체면적은 $9mm^2$이다. 설계된 회로는 $3V{\sim}5V$의 입력전압에서 동작하며 LC 필터의 크기를 줄이기 위해 50MHz의 주파수로 동작하였다. 최대 250mA의 부하전류 구동이 가능하며 최대 71%의 전력변환 효율을 가졌다.

In this paper, DC-DC buck converter with on-chip filter inductor and capacitor is presented. By operating at high switching frequency of 50MHz with stacked interleaved topology, we reduced inductor and capacitor sizes compared to previously published DC-DC buck converters. The proposed circuit is designed in a standard $0.5{\mu}m$ CMOS process, and chip area is $9mm^2$. This circuit operated at the input voltage of $3{\sim}5V$ range, the maximum load current of 250mA, and the maximum efficiency of 71%.

키워드

참고문헌

  1. J. Wong, 'A low noise low dropout regulator for portable equipment,' in Proc. Power Conv. Intell. Motion Conf., pp. 38-43, 1990
  2. F. Ueno, 'Emergency power supply for small computer systems,' in Proc. IEEE ISCAS, pp. 1065-1068, 1991
  3. S. Cuk, 'Basics of switched-mode conversion topologies, magnetics, and control,' Adv. Switched-Mode Power Conv., vol. 2, pp. 279-310, 1981
  4. D. K. Su and W. J. Mcfarland, 'An IC for linearizing RF power amplifiers using envelope elimination and restoration,' IEEE J. Solid-State Circuits, vol. 33., no. 12, pp. 2252-2258, Dec. 1998 https://doi.org/10.1109/4.735710
  5. G. Hannington, P. Chen, P. M. Ashbeck, and L. E. Larson, “High-efficiency power amplifier using dynamic power-supply voltage for CDMA applications," IEEE T. Microw. Theory Tech., vol. 47, no. 8, pp. 1471-1476, Aug. 1999 https://doi.org/10.1109/22.780397
  6. S. Abedinpour and B. Bakkaloglu, 'A multistage interleaved synchronous buck converter with integrated output filter in 0.l8 m SiGe process.' IEEE T. Power Electronics, vol. 22, no. 6, pp. 2164-2175, Nov. 2007 https://doi.org/10.1109/TPEL.2007.909288
  7. J. Wibben 'A high-efficiency DC-DC converter using 2nH integrated inductors.' IEEE J. Solid-State Circuits, vol. 43, no. 4, pp. 844-854, Apr. 2008 https://doi.org/10.1109/JSSC.2008.917321
  8. 허동훈, 남현석, 노정진, "휴대용 멀티미디어 기기를 위한 400mA급 전류 방식 DC-DC 컨버터," 대한전자공학회지, 제45권, SD편, 제8호, pp. 24-31, 2006
  9. R. W. Erickson and D. Maksimovic, 'Fundamentals of power electronics.' 2nd edition KAP, 2001
  10. C. Yoo, “A CMOS buffer without short-circuit power consumption", IEEE T. Circuits and Systems- II Analog and digital signal processing, vo1.47, no. 9, pp. 935-937, Sep. 2000 https://doi.org/10.1109/82.868462
  11. DC-DC converter product tree data sheet, http://www.maxim-ic.com
  12. DC-DC converter product tree data sheet, http://www.linear.com
  13. Tsai and C. hi-Taou, 'Package inductance measurement at high frequencies', IEEE Conf. Electronic Components and Technology, 42nd, pp. 740-744, May. 1992 https://doi.org/10.1109/ECTC.1992.204287
  14. PLCC data sheet, http://www.amkor.com
  15. M. Berkhout, 'Integrated overcurrent protection system for audio power amplifiers', IEEE J. Solid-State Circuits, vol. 10, no. 11, pp. 2237-2245, Nov. 2005 https://doi.org/10.1109/JSSC.2005.857369