International Journal of Fuzzy Logic and Intelligent Systems

  • 제9권3호
  • /
  • Pages.206-212
  • /
  • 2009
  • /
  • 1598-2645(pISSN)
  • /
  • 2093-744X(eISSN)
한국지능시스템학회 (Korean Institute of Intelligent Systems)
권호 표지
DOI QR코드

DOI QR Code

Integrated Task Planning based on Mobility of Mobile Manipulator (M2) Platform

  • Jin, Tae-Seok (Dept. of Mechatronics Engineering, DongSeo University) ;
  • Kim, Hyun-Sik (Dept. of Robot System Engineering, TongMyong University) ;
  • Kim, Jong-Wook (Dept. of Electronics Engineering, Dong-A University)
  • 투고 : 2009.05.29
  • 심사 : 2009.06.30
  • 발행 : 2009.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an optimized integrated task planning and control approach for manipulating a nonholonomic robot by mobile manipulators. Then, we derive a kinematics model and a mobility of the mobile manipulator(M2) platform considering it as the combined system of the manipulator and the mobile robot. to improve task execution efficiency utilizing the redundancy, optimal trajectory of the mobile manipulator(M2) platform are maintained while it is moving to a new task point. A cost function for optimality can be defined as a combination of the square errors of the desired and actual configurations of the mobile robot and of the task robot. In the combination of the two square errors, a newly defined mobility of a mobile robot is utilized as a weighting index. With the aid of the gradient method, the cost function is minimized, so the path trajectory that the M2 platform generates is optimized. The simulation results of the 2 ink planar nonholonomic M2 platform are given to show the effectiveness of the proposed algorithm.

키워드

참고문헌

  1. H.G. Tanner and K.J. Kyriakopoulos, "Nonholonomic Motion Planning For Mobile Manipulators," Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1233-1238, 2000
  2. G. Foulon, J.Y. Fourquet and M. Renaud, "Planning Point to Point Paths for Nonholonomic Mobile Manipulators," Proc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 374-379, 1998
  3. Stephen L. Chiu., "Task Compatibility of Manipulator Postures," The International Journal of Robotics Research, Vol. 7, No. 5, pp. 13-21, 1998 https://doi.org/10.1177/027836498800700502
  4. Mark W. Spong., Robot Dynamics and Control, John Wiley & Sons, pp. 92-101, 1989
  5. Zacharias, F., Borst, C., Beetz, M., Hirzinger, G., "Positioning mobile manipulators to perform constrained linear trajectories," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on, pp. 2578-2584, 2008
  6. Keum-Shik Hong, Young-Min Kim, and Chiutai Choi., "Inverse Kinematics of a Reclaimer: Closed-Form Solution by Exploiting Geometric Constraints," KSME International Journal, vol. 11, no. 6, pp. 629-638, 1997. https://doi.org/10.1007/BF02946333
  7. N. Hare and Y. Fing., "Mobile Robot Path Planning and Tracking an Optimal Control Approach," International Conference on Control, Automation, Robotics and Vision, pp. 9-11, 1997
  8. Dong Xu., Dongbin Zhao., Jianqiang Yi., Xiangmin Tan., "Trajectory Tracking Control of Omnidirectional Wheeled Mobile Manipulators: Robust Neural Network-Based Sliding Mode Approach," Systems, Man, and Cybernetics, Part B: Cybernetics, IEEE Transactions on vol. 39, Issue 3, pp. 788- 799, 2009 https://doi.org/10.1109/TSMCB.2008.2009464
  9. Dong Hun Shin., Hamner, B.S., Singh, S., Myung Hwangbo., "Motion planning for a mobile manipulator with imprecise locomotion," Intelligent Robots and Systems, 2003. (IROS 2003). Proc. 2003 IEEE/RSJ International Conference on, vol. 1, pp. 847-853, 2003
  10. Abdessemed, F., "Trajectory generation for mobile manipulators using a learning method,' Control & Automation, 2007. MED '07. Mediterranean Conference on, pp. 1-6, 2007
  11. M. T. Mason., "Compliance and Force Control for Computer Controlled Manipulators," IEEE Transaction on Systems, Man, Cybernetics, vol. 11, no. 6, pp. 418-432, 1981 https://doi.org/10.1109/TSMC.1981.4308708
  12. Dong Xu., Dongbin Zhao, Jianqiang Yi, Xiangmin Tan, "Robust adaptive tracking control of omnidirecitonal wheeled mobile manipulators," Intelligent Robots and Systems, 2007. IROS 2007. IEEE/RSJ International Conference on, pp.3598-3603, 2007
  13. M. Aicardi., "Closed-Loop Steering of Unicycle-like Vehicles via Lyapunov Techniques," IEEE Robotics and Automation Magazine, vol. 10, no. 1, pp.27-35, 1995
  14. James C. Alexander and John H. Maddocks., "Shortest Distance Path for Wheeled Mobile Robot," IEEE Transactions on Robotics and Automation, vol. 14, no. 5, pp. 657-662, 1998 https://doi.org/10.1109/70.720342
  15. Jang Myung Lee., "Dynamic Modeling and Cooperative Control of a Redundant Manipulator Based on Decomposition," KSME International Journal, vol. 12, no. 4, pp. 642-658, 1998

피인용 문헌

  1. Mechanism of Omni-directional Personal Mobility Vehicle with Diagonal Driving vol.26, pp.2, 2016, https://doi.org/10.5391/JKIIS.2016.26.2.153