대한환경공학회지 (Journal of Korean Society of Environmental Engineers)

  • 제31권12호
  • /
  • Pages.1135-1142
  • /
  • 2009
  • /
  • 1225-5025(pISSN)
  • /
  • 2383-7810(eISSN)
대한환경공학회 (Korean Society of Environmental Engineers)
권호 표지

호기성 입상화 장치를 이용한 입상슬러지 생성 및 특성

Formation and Characteristics of Granular Sludge Using Aerobic Granular Reactor

  • Lee, Bong-Seob (Department of Environmental Engineering, Dong-A University) ;
  • Choi, Seong-Woo (Department of Environmental Engineering, Dong-A University)
  • 투고 : 2009.08.26
  • 심사 : 2009.12.02
  • 발행 : 2009.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 고분자 응집제를 이용하여 짧은 시간에 입상형태의 슬러지를 제조한 다음, 입상슬러지를 호기성 입상화 장치에 주입하여 입상화를 시도하였다. 각 반응조에서 호기성 입자의 형성에 따른 입자의 크기, 밀도, 입자내 미생물 체외분비 고분자물질 등의 물리.화학적인 특성을 조사하였다. 입상형태의 슬러지를 호기성 입상화 장치에 주입하여 COD 부하량 3, 6, 9 $kg{\cdot}COD/m^3{\cdot}d$로 35일간 운전한 결과 최종 형성된 호기성 입장의 평균 크기는 각각 3.6 mm, 4.3 mm, 3.4 mm 이었고 호기성 입자의 침강속도는 각각 1.5 cm/s, 1.6 cm/s, 1.2 cm/s 이었다. COD 부하량에 따른 미생물 군집체의 비성장속도는 0.12 $d^{-1}$, 0.135 $d^{-1}$, 0.133 $d^{-1}$이었으며 전반적으로 호기성 입상화 장치에서는 COD 부하량이 $6kg{\cdot}COD/m^3{\cdot}d$로 운전된 반응조에서 호기성 입자의 물리 화학적인 특성이 우수하였다.

This study was carried out to investigate of aerobic granulation by using aerobic granular reactor. To make aerobic granular sludge in short period of time, we used polymer. In reactor, we have studied on physicochemical characteristics of particle size, density, and microbial secreting polymer depending on aerobic particle's formation. The results of running aerobic granular reactor with 3, 6, 9 $kg{\cdot}COD/m^3{\cdot}d$ of COD loading rate and 35 days reaction time showed that particle size were 3.6 mm, 4.3 mm, and 3.4 mm respectively. The settling velocities were 1.5 cm/s, 1.6 cm/s, and 1.2 cm/s respectively. The microbic growth rates were 0.12 $d^{-1}$, 0.135 $d^{-1}$, and 0.133 $d^{-1}$ respectively. The overall result of aerobic granular reactor showed that $6kg{\cdot}COD/m^3{\cdot}d$ of COD loading rate had optimal physicochemical characteristics.

키워드

참고문헌

  1. Lettinga, G. and Hobma, S. W., “Design operation and economy of anaerobic treatment” Water. Sci. Technol., 15, 177-195 (1983)
  2. Tay, J. H., Liu, Q. S., and Liu, Y., “The effect of shear force on the formation, structure and metabolism of aerobic granules,” Appl. Microbiol. Biotechnol., 57, 227-233(2001) https://doi.org/10.1007/s002530100766
  3. Su, K. Z., and Yu, H. Q., “Formation and characterization of aerobic granules in a SBR treating soybean-processing wastewater,” Environ. Sci. Technol., 39, 2818-2827(2005) https://doi.org/10.1021/es048950y
  4. Tay, J. H., Liu, Q. S., and Liu, Y., “Microscopic observation of aerobic granulation in sequential aerobic sludge blanket reactor,” J. Appl. Micro,. 91, 168-175(2001) https://doi.org/10.1046/j.1365-2672.2001.01374.x
  5. Yu, L., Xu, H. L., Yang, S. F., and Tay, J. H., “Mechanisms and models for anaerobic granulation in upflow anaerobic sludge blanket reactor,” Water Res., 37, 661-673(2005) https://doi.org/10.1016/S0043-1354(02)00351-2
  6. Shin, H. S., Lim, K. H., and Park, H. S., “Effect of shear stress on granulation in oxygen aerobic upflow sludge reactors,” Water Sci. Technol., 26, 601-605(1992)
  7. Lenore, S. C., Arnold, E. G., and Andrew, D. E., “Standard Methods for examination of water and wastewater : COD(5220), ML(V)SS(2540)”, 19th ED, APHA-AWWA-WPCF(1998)
  8. Tay, J. H., Liu, Q. S., and Liu, Y., “Aerobic granulation in sequential sludge blanket reactor,” Water Sci. Technol., 46, 13-18(2002)
  9. 윤주환, 장희란. 한종훈, 한혜정, “SBR에서 호기성 입상슬러지의 형성,” 한국물환경학회지, 20(5), 534-538(2004)
  10. Moy, B. Y. P., Tay, J. H., Toh, S. K., Liu, Y., and Tay, S. T. L., “High organic loading influences the physical characteristics of aerobic sludge granules,” Lett. Appl. Microbiol., 34, 407-412 (2002) https://doi.org/10.1046/j.1472-765X.2002.01108.x
  11. Liu, Q. S., Tay, J. H., and Liu, Y., “Substrate concentrationindependent aerobic granulation in sequential aerobic sludge blanket reactor,” Environ. Technol., 24, 1235-1243(2003) https://doi.org/10.1080/09593330309385665
  12. Delia Teresa Sponza., “Investigation of extracellular polymer substances (EPS) and physicochemical properties of different activated sludge flocs under steady-state conditions,” Enzy. and Micro. Technol., 32, 375-385(2003) https://doi.org/10.1016/S0141-0229(02)00309-5
  13. Yang, S. F., Tay, J. H., and Liu, Y., “Effect of substrate nitrogen/chemical oxygen demand ratio on the formation of aerobic granules,” J. Environ. Eng., 131, 1, 86-92(2005) https://doi.org/10.1061/(ASCE)0733-9372(2005)131:1(86)
  14. Tay, J. H., Liu, Q. S., and Liu, Y., “The role of cellular polysaccharides in the formation and stability of aerobic granules,” Lett. Appl. Microbiol., 33, 222-226(2001)
  15. 김광수, 박수영, “입상활성슬러지와 멤브레인 조합공정에 의한 수처리공법개발(II),” (주) 알오환경시스템, 38-40 (2001)
  16. Qin, L., Tay, J. H., and Liu, Y., “Selection pressure is a driving force of aerobic granulation in sequencing batch reactors,” Proc. Biochem., 39, 579-584(2004) https://doi.org/10.1016/S0032-9592(03)00125-0
  17. Gaudy, A. F., and Gaudy, E. T., “Microbiology for environmental scientists and engineers,” New York : Mc Graw Hill(1980)