Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Block Erection Simulation Using the Integrated System of Combined Discrete Event and Discrete Time Simulation Kernel

이산 사건 및 이산 시간 혼합형 시뮬레이션 커널의 통합 시스템을 이용한 블록 탑재 시뮬레이션

  • Cha, Ju-Hwan (Department of the Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Roh, Myung-Il (School of Naval Architecture and Ocean Engineering, University of Ulsan) ;
  • Cho, Doo-Yeoun (Department of the Naval Architecture and Marine Engineering, Mokpo University) ;
  • Lee, Kyu-Yeul (Department of the Naval Architecture and Ocean Engineering, and Research Institute of Marine Systems Engineering, Seoul National University)
  • 차주환 (서울대학교 조선해양공학과 대학원) ;
  • 노명일 (울산대학교 조선해양공학부) ;
  • 조두연 (목포대학교 기계.선박해양공학부 선박해양시스템) ;
  • 이규열 (서울대학교 조선해양공학과 및 해양시스템공학연구소)
  • Published : 2009.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, requests for the accurate process planning using modeling and simulation technique are increasing in many engineering fields including shipbuilding industry. In this study, Combined DEVS(Discrete EVent System specification) and DTSS(Discrete Time System Specification) simulation kernel is developed, and an integration strategy of dynamics simulation module and graphics module is also implemented. To evaluate the efficiency and applicability of the simulation kernel and integration strategy, these are applied to the block erection simulation of offshore structures.

Keywords

References

  1. Bang, K.W., 2006, Combined Discrete Event and Discrete Time Simulation Framework for Shipbuilding Process Planning, M.Sc. Thesis, Seoul National University
  2. Bang, K.W., Lee, K.Y., Cha, J.H., Roh, M.I., and Kim, H.J., 2007, 'Proposal of a Combined Discrete Event and Discrete Time Simulation Framework and Its Application to the Block Erection Process in Shipbuilding,' Proceedings of the Annual Meeting, The Society of CAD/CAM Engineers of Korea, pp. 297-305
  3. Cha, J.H., Bang, K.W. and Roh, M.I., 2006, Calculation of the Wire Tension and Angle of a Crane Using an Open Dynamics and Collision Calculation Library ODE(Open Dynamic Engine), Technical Report, Advanced Ship Design Automation Laboratory, Seoul National University
  4. Cha, J.H., Lee, K.Y., Roh, M.I., Ham, S.H., Suh, H.W., and Park, K.P., 2007, 'A Strategy for Integration of Dynamics Module and Visualization Module for Shipbuilding Process Simulation,' Proceedings of the Annual Meeting, The Society of CAD/CAM Engineers of Korea, pp. 385-391